MULTIBRACKETS 5605 Wall Bracket Installation Guide

MULTIBRACKETS 5605 Wall Bracket

Specification

• Mal: MULTIBRACKETS 5605 Universal Wall Bracket / Long Reach Arm Mount
• Awa: Full-motion articulating TV wall mount (dual arm long-reach swivel)
• Reng: Qedîfa metalê reş
• Mal: Heavy-duty solid steel construction
• Screen Compatibility: Fits most flat-panel TVs 65″ – 110″ diagonal
• Max screen diagonal: ~279 cm (110″)
• Kapasîteya giran: Up to 125 kg (~275 lbs) load support
• Piştgiriya VESA: Compatible with most VESA patterns from 100×100 mm up to 800×600 mm
• Movement & Adjustment: Full-motion swivel, tilt, and rotate at multiple pivot points
• Rêjeya tiltê: approx. -5° to +10°
• Swivel/rotation: approximately 60° to +60°
• Extension from wall: up to 980 mm (~38.6″)
• Taybetmendî:
  • Dual long-reach arms for flexible viewhelwestên ing
  • Smart cable management system to hide cables
  • Partially pre-assembled with a full hardware kit included
• Cureyê Sazkirinê: Wall mount, articulating bracket
• Reng: Reş

GIRING!
Your Plasma. LCD. TV, Projector, Projector Screen, or other HiFi equipment represents a considerable value.
If screws are Included they may not be suitable for the material of your wall, ceiling, or floor. Replace the screws with suitable ones if needed.
In case you are unsure regarding any aspects or the mounting of this product,t please
Bi pisporek bişêwirin.

Gazî!
Herdem berçavkirin ew kûrî of ew holes berî dest pê dike an lêkirinî.

Fits most 65″-110″ flat panel TV

• Weight capacity: 125kg/275 lbs
• VESA compliance: 100×100 200×200 300×300 400×200 400×400 600×400 800×600

GAZΠ
Zirara kesane ya giran û zirara malî dikare ji sazkirin an kombûna nerast derbikeve holê. Berî destpêkirinê hişyariya jêrîn bi baldarî bixwînin.

• Divê hilber ji hêla pisporan ve bêne saz kirin.
• Heke hûn rêwerzan fam nakin an fikar an pirsek we heye, ji kerema xwe bi sazkerek herêmî ya jêhatî re têkilî daynin.
• Heke hilber an hardware zerar bibe an winda bibe saz nekin an berhev nekin. Ger ji we re beşên guheztinê hewce bike, ji kerema xwe ji bo arîkariyê bi belavkarê xweya herêmî re têkilî daynin.
• This product fits most65″-11D”LCD and plasma screens; maximum weight of LCD /plasma screen: 125kg.
• This product has been designed for use on masonry (solid concrete, 2000 PSI density minimum).
• For safe installation. The wall you are mounting to must support a minimum of 3 times the weight of the total load (the mount, the TV, and all accessories).
• Vê hilberê ji bo serîlêdanên din ên ku ji destpêkê ve hatî sêwirandin bikar neynin.
• This product contains moving parts; please use it with caution.
• When installing a flat panel display, please do not damage the electrical wiring or the power source.
• Hilberîner dê ti berpirsiyariyek ji bo lêkirina li ser dîwarê vertîkal, an zirarên rûdanî an encamgir ên ku ji wan çêdibin negirin.
• Hilberîner berpirsiyariya guherandin, sazkirina nerast, an sazkirina li ser rêza giraniya diyarkirî red dike.
• The manufacturer will not be liable for any damages arising out of the use of, or inabilityto use, the product.

Lîsteya berê

LÊKIRINÎ

INSTALLATION OPTION 1: Wood Stud Installation (Suitable for 16″ or 24″ apart studs)

1. Use a stud finder to locate the drywall studs and mark the desired installation locations with a pencil.
2. Li cîhê sazkirinê ya xwestinê Şablona Dîwarê (BB) bi dîwêr ve girêdin.
3. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt locations in the middle of the studs.
4. Use a 7/32″ (5.5mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm).

Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers (H).

NOT: Do not use Wall Anchor (I) for wood stud installation.

BİXWÎNE BİXWÎNE BİXWÎNE 2: Sazkirina Dîwarê Beton/Brick

1. Li cîhê sazkirinê ya xwestinê Şablona Dîwarê (BB) bi dîwêr ve girêdin.
2. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall.
3. Use a 3/8″ (10 mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm). Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

6 x Ankerên Dîwarê (I) têxin kunên. Bi 6 x Lag Bolts (H) û 6 x Washers (H) Plateya Dîwarê li ser dîwêr ewle bikin.

This full motion TV wall mount comes with a sliding mechanism that allows the arms and the TV to slide horizontally left or right for up to 15. 7 inches, while the wall plate is stationary on the wall. This feature allows the TV to be placed at an optimal position, regardless of the position of the wall studs. The mount will ship with the locking bars installed in place at their center position. If the sliding function will be used, take off the locking plates by removing the bolts that hold them in place.

Place the top locking bar at the desired position to fix the left slide limit of the arms, and place the bottom bar at the desired position to fix the right side limit of the arms. The raised metal piece at the end of the locking bars limits the slide of the arms. Ensure the locking bars are oriented correctly to ensure both the left and right side locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking bar’s position to prevent the arms from sliding off the wall plate.

GAZÎ: FAILURE TO INSTALL THE LOCKING BARS ADEQUATELY MAY RESULT IN THE ARMS AND THE TV FROM SLIDING OFF THE WALL PLATE.

Attaching the TV to the Mount (For Displays With Smaller Bolt Hole Patterns)
For TVs with smaller bolt hole patterns of VESA 100×100, 100×200, 200×100, and 200x200mm, the TV can be mounted directly on the plate, without the extension bars.

Girêdana TV-yê bi çiyê (Ji bo Dîmenderên Bi Nimûneyên Kulên Boltê Mezintir) Ji bo TV-yên bi qalibên qulika pêlên mezin ên VESA 300×300,400×200,400×400,600×400, 800×600 mm, ji bo sazkirina pêlên TV-yê û barên dirêjkirinê bikar bînin. TV ber bi çiyê.

Attach the 2 x TV Brackets to the back of the TV by using screws A+E, B+E, C+E, or Dor G.

NOT: The hardware packet provided fits most TVs in the market. If your TV requires different hardware, please contact us at mount-it.com to procure additional hardware kits.

Ensure the screws are adequately engaged with the screw holes on the TV.
Do not overtighten the screws. Ensure the TV brackets sit flat with the back of the T.V.

Hangina g TV On The Wall Mount Arms

Lift the TV (two persons recommended) and hang the TV brackets onto the wall mount extension bars.

Ewlekirina TV-yê Li Çiyayê

Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F Screws as shown ointhe image.

NOT: Kêmasiya girtina pêlavên TV-yê li ser çiyê bi Kevirên Ewlehiyê yên AA-yê dibe ku bibe sedema rakirina bêserûber TV ji barikên dirêjkirinê, dibe ku bibe sedema zirara laş an malî.

Rêzkirina astê -5° – +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To adjust the level of the TV, place a bubble level on top of the TV, loosen the 2 x G bolts located behind the VESA plate, level the TV, and tighten the 2 x G bolts to lock the TV in position.

Veguheztina tiltê -5° – +10°

The mount can tilt down up to 10 degrees and up 5 degrees. To adjust the tilt angle of the TV, pull out the tilt adjustment levers on both sides of the mount and turn counterclockwise to loosen the screws. Adjust the tilt to the desired angle and turn the tilt adjustment lever clockwise to tighten the screws.

NOT: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT ADJUSTMENT LEVER TIGHTNESS AND TIGHTEN IF NECESSARY.

Klîpên rêveberiya kabloyê yên yekbûyî yên li ser milan bikar bînin da ku kabloyan berbi pişt an kêleka TV-yê vegerînin.

Ebat

KART GARANY

PIRTRKIRACKN “™ Limited Libersekînîn

Multibrackets garantî dike xwe berhemên ber be belaş of kêmasiyan in mal û xebatkarî bo ew berhemê Libersekînîn Cilhatina jinan.

Ew Libersekînîn cilhatina jinan dest pê dike on ew eslî kirrîn rojek of ew mal

Gişt Multibrackets berhemên in nixumandî by a sînorkirî mal libersekînîn

• PÊNC (5) years bo hesinî video lê gûhdarkirin mounts, gişt racksû non-electrical rack vêra
• DU (2) years bo gaslifts û sit-stand qereqolên xebatê
• YEK (1) sal bo gişt motorîze kirin û/an automated berhemên, pîlastîk gotevan mounts, gişt gotevan stands, gişt navmalî, gişttext (MDF) vêra

Bo libersekînîn îdîa dike çêkirin dema ew Libersekînîn Cilhatina jinan, MULTIBRAKETS xwestek diberdaxistin herçiyek şaşîyane mal par belaş of charge. Should a par on ya te Multibrackets mal fail, ji kerema xwe ve xûliqandin anRMA doz on www.multibrackets.com/support ber kirin a libersekînînmaf. We xwestek await ya te belgekirin û paşan discuss ewpirsegirêk bi hûn, û carek we confirm ew mal is binê şerrranty, we xwestek gemî diber parçeyên ber hûn. Ev Limited Libersekînîndike ne lihêv ew mesrefên of rakirin û li şûna şaşîyane parçeyênji ya te Multibrackets mal. Wiha, if ya te pirsegirêk hewce dike apîne technician, hûn mecbûrmayin diravdan herçiyek kar xercên.

For warranty claims made during the Warranty Period, MULTI BRACKETS will replace any defective product part free of charge. Should a part of your Multibrackets product fail, please create an RMA case on www.multibrackets.com/support to make a warranty claim. We will await your documentation and then discuss the problem with you, and once we confirm the product is under warranty, we will ship replacement parts to you. This

Limited Warranty does not cover the costs of removing and replacing defective parts from your Multibrackets product. So, if your problem requires arepair technician, you must pay any labor charg.es This Limited Warranty extends only to the original purchaser of the product and is automatically void if your Multibrackets product is modified in any way, improperly installed, taxed beyond its stated weight capacity, or otherwise misused or abused.

All Multibrackets products are intended for indoor use only, and any outdoor use voids this Limited Warranty. The Limited Warranty for wall and ceiling mounts is void if the mount is moved from its initial installation. To the maximum extent permitted by applicable law, Multibrackets disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Multibrackets will not be liable for any damages whatsoever arising out of the use or inability to use itsproducts, even if Multibrackets has been advised of the possibility of such damages. To the maximum extent permitted by applicablelaw, Multibrackets disclaims any responsibility for incidental or consequential damages,

Multibrackets M Stockholm, Sweden 2016. www.multibrackets.com

The content of this manual is subject to Change wltheut further notice. The latest vers, on of this manual can be found online under the product name on the webmalper: www.multibrackets.com