Contents
veşartin
HONGWEI MICROELECTRONICS ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module
Specifications
- Mal: ESP32 Development Board
- Çêker: Espressif
- Compatibility: Arduino IDE
- Webmalper: https://www.arduino.cc/en/Main/Software
Talîmatên Bikaranîna Product
Download Software and Development Board
- Nermalava Arduino IDE ji malpera fermî dakêşin. webmalpera ku li jor hatî pêşkêş kirin.
- Open the Arduino IDE software to start the setup process.
Add ESP32 Development Environment
- Di Arduino IDE de, biçin File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- Neqandin File -> Mînakample -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
Daxuyaniya Daxuyaniyê û Copyright
Agahdariya di vê belgeyê de, tê de URL navnîşanên ji bo referansê, bêyî agahdarî tê guhertin. Belgekirin "wekî ku ye" bêyî garantiyek ji her cûreyî tê pêşkêş kirin, di nav de garantiyên kirrûbirrê, guncan ji bo armancek taybetî, an ne binpêkirin, û her garantiyek ku di her pêşniyar, taybetmendî an s de li cîhek din hatî destnîşan kirin.ample. Di vê belgeyê de tu berpirsiyarî nayê girtin, tevî berpirsiyariya binpêkirina mafên patentê yên ku ji karanîna agahdariya di vê belgeyê de derdikevin. Ev belge bi vê yekê, ji hêla estoppel an wekî din ve, ti destûrek, eşkere an jî têgihîştî, ji bo karanîna mafên milkê rewşenbîrî nade.
The test data obtained in this article are all obtained by the Ebyte laboratory test, and the actual results may be slightly different. All trade names, trademarks and registered trademarks mentioned herein are the property of their respective owners and are hereby acknowledged. Ebyte Electronic Technology Co., Ltd.
Not
Due to product version upgrade or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free. All statements in this manual, information ,and advice do not create any express or implied warranties.
Serview
danasîna Product
ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development boards for developing and testing small-sized ESP32-C3-MINI-1 & ESP32-C3-MINI-1U modules. This group of development boards has complete Wi-Fi and Bluetooth low energy functions, and most of the pins of the modules on the board have been led out to the pin headers on both sides. Developers can easily connect various peripherals through jumpers according to actual needs. The device can also be used by plugging the development board into the breadboard.
Parametreyên
Danasîna pêkhateyan
Components and interfaces
Not: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1.
Pênaseya Pin
Nîşaneya erênî ya jêrîn ESP32-C3-MINI-1-TB wekî mînakek nîşan dideample:
Têbînî
- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
danasîna fonksiyonê
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
Guide Burning Program
- Berî ku hûn çalak bikin, pê ewle bin ku ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB saxlem in.
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
Dîroka Revision
Pirsên Pir Pir Pirs
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
Belge / Çavkanî
 |
HONGWEI MICROELECTRONICS ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module [pdf] Rehbera bikaranînê ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module, ESP32 C3, Development Board Modules Mini Wifi BT Bluetooth Module, Board Modules Mini Wifi BT Bluetooth Module, Wifi BT Bluetooth Module, BT Bluetooth Module, Bluetooth Module |