Escrow-Tech ETLTS001 Carbon-Adjust Temperature and Humidity Sensor
Agahiya hilberê
Specifications
- Navê Berhem: Wi-Fi Temperature & Humidity Sensor With Backlight
- Cins: Version 25/ETLTS001/1
- Çavkaniya hêzê: Pîl
- Têkilî: Wi-Fi, Bluetooth
- Lihevhatî: Works with Carbon-Adjust app, Amazon Alexa, Google Assistant
Talîmatên Bikaranîna Product
Device Power
Please open the back cover of the product before use, and remove the battery insulation sheet to power the device.
Talîmatên Setup
- Scan the QR code or download the Carbon-Adjust app from the Google Play Store or APP Store.
- Turn on Bluetooth on your mobile phone, open the app, and press and hold the sensor for 5 seconds until the WiFi icon displays.
- Connect to WiFi, set temperature and humidity values for alarms.
- Share devices with family members for monitoring.
- Monitor temperature and humidity on the screen in real-time.
- Register the app with an email address and add the device to the Wi-Fi network.
Settings
- Set upper and lower limits for temperature/humidity.
- Adjust temperature and humidity ranges.
- Customise temperature/humidity sensitivity.
Taybetmendiyên Additional
- Kontrola Deng: Bi Amazon Alexa û Alîkarê Google re dixebite.
PÊŞKÊŞ
Ji kerema xwe berî karanîna vê manualê bi baldarî bixwînin û ji bo referansa pêşerojê biparêzin.
Parametreyên Hilberê
- Mezinayî: 55*55*25mm
- Input voltage: DC4.5V LR03*3
- Hêza bêdeng:<30uA
- Binavê hêza kêmtage: <2.7V
- Germahiya xebatê: -10°C~55°C
- WiFi: 802.11b/g/n 2.4GHz
- Working şilî: 10% 90% RH
- Modela hilberê: ETLTS001
Device Power
Please open the back cover of the product before use, and remove the battery insulation sheet to power the device.
Meriv çawa saz dike
- First, scan the QR code with your smartphone, or search the Carbon-Adjust app in the Google Play Store or APP Store to download and install the app.
- Register the app with an email address.
- Moda Bluetooth: First, turn on Bluetooth on your mobile phone.
- Open the Carbon-Adjust app and choose “+”. I press and hold the sensor for 5 seconds, I the WiFi icon will indicate on the sensor display.
- After this, you will see devices to be added to your mobile app.
- Finally, press “Go” to add. It will connect to the Wi-Fi network automatically.**
- After connecting to WiFi successfully, click the sensor icon to enter the app interface and make some settings.
- You can preset the value of temperature and humidity for alarming effects from here.
Hesasiya germahî / şilbûnê:- Sensor temperature/humidity value will synchronise to the app when the upper/lower preset temperature/humidity values. For example, if the temperature is 28°˜ and humidity is 70%, the temperature/ humidity sensitivity is ±0.6/6%, then the sensor temperature/humidity value will synchronise to the app when the temperature/humidity is 28.6°˜ or 27.4°˜ /76% or 64%. (Factory default: temperature sensitivity is 0.6°˜, humidity sensitivity is 6%)
- Pêdiviyên etîketkirinê
- Ev cîhaz bi beşa 15 ya Rêgezên FCC re tevdigere. Operasyon bi du şertên jêrîn ve girêdayî ye:
- Dibe ku ev amûr nebe sedema destwerdana zirardar,
- Pêdivî ye ku ev amûr her destwerdana wergirtî qebûl bike, di nav de destwerdana ku dibe ku bibe sedema xebata nexwestî.
- Agahdariya bikarhêner
- Her Guhertin an guheztinên ku bi eşkere ji hêla partiyê berpirsiyarê lihevhatinê ve nehatine pejirandin, dikare desthilatdariya bikarhêner a xebitandina amûrê betal bike.
Temperature/humidity report cycle: Time setting of sensor temperature and humidity value synchronisation to the app (factory default is 120 minutes).
Temperature/humidity upper and lower limits are set:- The Setting of the temperature/humidity range.
- Agahdariya bikarhêner
- Not: Ev amûr hate ceribandin û hate dîtin ku bi sînorên ji bo amûrek dîjîtal a pola B, di binê beşa 15-ê ya Rêgezên FCC de tevdigere. Van sînoran ji bo peydakirina parastina maqûl li dijî destwerdana zerardar di sazgehek niştecîh de hatine çêkirin. Ev amûr bikaranînê çêdike û dikare enerjiya frekansa radyoyê bitewîne û, heke di binê rêwerzan de neyê saz kirin û bikar anîn, dibe ku bibe sedema destwerdana zirardar li ragihandina radyoyê. Lêbelê, garantiyek tune ku destwerdan dê di sazkirinek taybetî de çênebe. Ger ev amûr bibe sedema destwerdana zerardar ji bo wergirtina radyo an televizyonê, ku dikare bi qutkirin û vekirina amûrê were destnîşankirin, bikarhêner tê teşwîq kirin ku hewl bide ku destwerdanê bi yek an çend tedbîrên jêrîn rast bike:
- Antenna wergirtinê ji nû ve veguhezînin an veguhezînin.
- Cûdahiya di navbera amûr û wergirê de zêde bikin.
- Amûran bi dergehek li ser pêvekek ji ya ku wergir pê ve girêdayî ye ve girêdin.
- Ji bo alîkariyê bi firoşkar an jî teknîsyenekî radyo/TV yê bi tecrûbe bişêwirin.
- You can preset the value of temperature and humidity for alarming effects from here.
- Girêdana aqilmend: Gava ku hawîrdora hawîrdorê diguhezîne, hûn dikarin girêdanek aqilmend bikin. Ji bo example, the air conditioner will be on automatically when the room temperature surpasses 35°˜.
- The humidifier will spray when the humidity is lower than 20% RH.
- Hişyariya RF ji bo cîhaza mobîl:
- Ev amûr bi sînorên radyasyona tîrêjê ya FCC re ku ji bo jîngehek nekontrol hatine destnîşan kirin tevdigere. Divê ev amûr bi dûrahiya herî kêm 20 cm di navbera radyator û laşê we de were saz kirin û xebitandin.
- The humidifier will spray when the humidity is lower than 20% RH.
- Amûrên parve bikin: Hûn dikarin cîhazên xweyên zêdekirî bi endamên malbata xwe re parve bikin, ji ber vê yekê ew dikarin hawirdora hawîrdorê jî bişopînin.
- Screen on Sensor: You can in real-time, monitor the temperature and humidity on the screen directly.
- Temperature Unit Selection in App: You can choose °˜ or °° as the temperature unit through the app.
- Third-party Kontrola Deng: Bi Amazon Alexa û Alîkarê Google re dixebite.
Carbon-Adjust
- Serdana me bikin website for updated Terms and Conditions
- Made in China for Escrow-Tech Limited, Castlemead, Lower Castle Street, Bristol, BS1 3AG
Pirsên Pir Pir Pirs
- Q: How do I connect the sensor to WiFi?
- A: Follow the setup instructions provided in the manual to connect the sensor to WiFi. Make sure to download the Carbon-Adjust app and register the device.
- Q: Can I share the device with family members?
- A: Yes, you can share added devices with family members so they can also monitor the ambient environment through the app.
Belge / Çavkanî
 |
Escrow-Tech ETLTS001 Carbon-Adjust Temperature and Humidity Sensor [pdf] Rêbernameya Bikarhêner ETLTS001, ETLTS001 Carbon-Adjust Temperature and Humidity Sensor, Carbon-Adjust Temperature and Humidity Sensor, Adjust Temperature and Humidity Sensor, Temperature and Humidity Sensor, Humidity Sensor |