DELL Command Configure Software User Manual

DELL Command Configure Software User Manual

Têbînî, hişyarî, û hişyarî

NOT: NOTE agahdariya girîng destnîşan dike ku ji we re dibe alîkar ku hûn hilberê xwe çêtir bikar bînin.

HIUTYAR: HIYAREK an zirara potansiyel a zexîreyê an jî windabûna daneyê nîşan dike û ji we re vedibêje ka meriv çawa ji pirsgirêkê dûr dikeve.

HIŞYARÎ: HIŞYARÎ potansiyela zirara malî, birînên kesane, an mirinê nîşan dide.

© 2025 Dell Inc. an şaxên wê. Hemû maf parastî ne. Dell Technologies, Dell, û tîcarî yên din marqeyên Dell Inc. an şaxên wê ne. Dibe ku tîcarî yên din marqeyên xwediyên wan ên têkildar bin.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

NOT: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• Fermana Dell | Veavakirina 4.10.1 an paşê SCE-ya 64-bit bi astengan çêdike.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

Mijar:

• Awa
• Temaşevanên mebest
• Armanca belgeyê

Awa

Ev beş serpêhatiyek pêşkêşî dikeview of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• Windows 11
• Windows 10
• Jîngeha Pêş-sazkirinê ya Windows (Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

Table 1. Versiyon matrix

NOT: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

Temaşevanên mebest

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

Armanca belgeyê

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

Gihîştina Fermana Dell | Sazkerê mîheng bike

Fermana Dell | Sazkirinê mîheng bike file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. Biçe Piştgiriyê | Dell.
2. Binê Kîjan hilberê em dikarin ji we re bibin alîkar, têkevin Xizmetkar Tag ya cîhaza Dell ya piştgirî ya we û bikirtînin Nermijîn, an bikirtînin Komputera kesane tespît bikin.
3. Li ser rûpela Piştgiriya Hilberê ya ji bo cîhaza xweya Dell, bikirtînin Ajokar & Daxistin.
4. Bikirtînin Bi destan ajokerek taybetî bibînin ji bo we [model].
5. Berçavkirin Birêvebirina Pergalê checkbox bin Liq drop-down.
6. Dîtin Fermana Dell | Mîheng bikin in list and select Download li aliyê rastê yê rûpelê.
7. Cihê daxistinê bibînin file li ser komputera we (di Google Chrome de, ya file li binê pencereya Chrome-ê xuya dike), û darvekirinê bimeşîne file.
8. Talîmatên li ser ekranê bişopînin.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

Mijar:

• Pergalên xebitandinê yên ji bo Windows-ê piştgirî kirin
  
• Platformên piştgirî kirin
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

Pergalên xebitandinê yên ji bo Windows-ê piştgirî kirin

Table 2. Pergalên xebitandinê yên piştgirî kirin

Platformên piştgirî kirin

Table 3. Supported platforms

Table 3. Supported platforms (continued)

NOT: Platforms must support WMI-ACPI BIOS for full functionality.

NOT: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

NOT: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

NOT: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

Pêşdibistanên

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

NOT:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft .NET Framework 4.8 or later version from the Taybetmendiyên Windows-ê çalak bikin an vekin parêzî.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. DUP-a dakêşandî du caran bikirtînin, Erê bikirtînin, û paşê bikirtînin INSTALL.
   Fermana Dell | Wizard sazkirinê mîheng bike tê xuyang kirin.
2. Sêrbazê sazkirinê bixebitin.
   Ji bo bêtir agahdarî, binihêrin Rêvekirina sêrbazê sazkirinê.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. Fermana jêrîn bicîh bikin:

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. Pakêta Nûvekirina Dell-ê ya dakêşandî (DUP) du caran bikirtînin, û Erê bikirtînin.
2. Bikirtînin EXTRACT.
   Paceya Browse For Folder tê xuyang kirin.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. Ber view yên hatine derxistin files, bitikîne View Pêçek.
   Peldanka jêrîn heye files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. Ji bo gihîştina Fermana Dell | Sêrbazê sazkirinê mîheng bikin, du caran bikirtînin Command_Configure.msi.
6. Sêrbazê sazkirinê bixebitin.
   Ji bo bêtir agahdarî, binihêrin Rêvekirina sêrbazê sazkirinê.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

Sêrbaziya sazkirinê dimeşîne

To run the installation wizard for installing the Dell Command | Configure .msi file on your device:

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   Wizard sazkirinê tê nîşandan.
3.  Bikirtînin Next.
   Dîmendera Peymana Lîsansê tê xuyang kirin.
4. Peymana lîsansê bixwînin û bikirtînin Ez şertên peymana lîsansê qebûl dikim, û dûv re bikirtînin Next.
   Ekrana Agahdariya Xerîdar tê xuyang kirin.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   Ekrana sazkirina xwerû tê xuyang kirin.
6. Ji bo sazkirina Fermana Dell | Next bikirtînin CLI û GUI di pelrêça xwerû de mîheng bikin. Fermana xwerû ya Dell | Pelên sazkirinê mîheng bikin ev in:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Veavakirin.
   Dîmena Bernameyê ji bo Sazkirinê Amade ye tê xuyang kirin.
7. Erê bikirtînin.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. Bikirtînin Finish.
   Ger Fermana Dell | Veavakirina GUI bi serfirazî hate saz kirin, kurteya GUI li ser sermaseyê tê xuyang kirin.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

NOT: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

NOT: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. Herin peldanka ku Fermana Dell | Sazkerê mîhengan ji Pakêta Nûvekirina Dell (DUP) tê derxistin.
2. Open Command Prompt as administrator.
3. Fermana jêrîn bixebitîne: msiexec.exe /i Command_Configure.msi /qn
   Fermana Dell | Parçeyên mîheng bi bêdengî li cîhên jêrîn têne saz kirin:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Veavakirin.

Sazkirina bi zimanên piştgirîkirî

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 - Taywanê Çînî
• 1031 - Almanî
• 1033 - .ngilîzî
• 1034 - Spanî
• 1036 - Fransî
• 1040 - Îtalî
• 1041 - Japonî
• 1043 - Holandî
• 2052 - Çînî ya hêsankirî
• 3076 - Çînî Hongkong

NOT: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. Vekin Panela Kontrolê.
2. Biçe Bername > Bername û Taybetmendî.
3. Find Dell Command | Configure di lîsteyê de.
4. Right-click it and select Rakirin.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

NOT: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

NOT: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

NOT: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

NOT: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

Ji bo nûvekirina Fermana Dell | gavên jêrîn bicîh bînin | Veavakirina (berê Dell Client Veavakirina Toolkit) ji bo guhertoya paşîn:

1. Double-click the downloaded DUP, and then click LÊKIRIN.
   Fermana Dell | Sêrbaziya sazkirinê mîheng bike dest pê kir.
2. Sêrbazê sazkirinê bimeşînin, û rêwerzên ku li ser ekranê têne xuyang kirin bişopînin.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. Sazkirina herî dawî dakêşin file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the file, û paşê emrê jêrîn bimeşînin:
   msiexec.exe /i Command_Configure.msi REINSTALL=HEMÛ REINSTALLMODE=VOMUS
   NOT: Dîmendera sêrbazê sazkirinê tê xuyang kirin "Guhertoyek kevntir a Fermana Dell | Veavakirin li ser vê pergalê tê dîtin. Heke hûn berdewam bikin, sazker dê guhertoya kevntir jê bibe û sazkirina guhertoya herî dawî bidomîne. Ger hûn sazkirina guhertoya herî dawî betal bikin, dê pergal li guhertoya berê ya Dell Command neyê vegerandin | Mîheng bikin. Ma hûn dixwazin berdewam bikin?” agah.
3. Ji bo nûvekirinê rêwerzên li ser ekranê bişopînin.
   NOT: Ji bo nûvekirinek bêdeng, emrê jêrîn bimeşînin: msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALLYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

Di peldanka xwerû de nûvekirin

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. Li peldanka ku we tê de Fermana Dell derxistiye bigerin | Sazkerê ji Pakêta Nûvekirina Dell (DUP) mîheng bikin.
2. Fermana jêrîn bixebitîne: msiexec.exe /i Command_Configure.msi /qn
   Fermana Dell | Parçeyên mîheng bi bêdengî li cîhên jêrîn têne saz kirin:
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Command Veavakirin.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Veavakirin.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

Mijar:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

Table 4. Pergalên xebitandinê yên piştgirî kirin

Supported Platforms for Linux

Table 5. Supported platforms

NOT: Platforms must support WMI-ACPI BIOS for full functionality.

NOT: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

NOT:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. NOT:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
Rêya sazkirinê ya xwerû /opt/dell/dcc e.

Pêşdibistanên

• Pêdivî ye ku stasyona xebatê li ser pergala xebitandina Linux-ê ya piştgirî were xebitandin.
• Pirtûkxaneyên openSSL 1.x dakêşin da ku Dell Command | Li ser Red Hat Enterprise Linux 8 û Ubuntu Desktop 20.04 mîheng bikin.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. Ji dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. Untar the file bikaranîna fermana jêrîn:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. Untar the file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   Guhertoya>_.tar.gz pakêtên jêrîn hene ku divê bi rêza jêrîn werin saz kirin:
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   NOT: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f saz bike
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   Rêya sazkirinê ya xwerû /opt/dell/dcc e.
   NOT: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f saz bike

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

NOT: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

Ji bo rakirina Fermana Dell | Li ser pergalên ku Red Hat Enterprise Linux 8 an 9 dixebitin mîheng bikin, fermanan bi rêza jêrîn bimeşînin:

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

NOT: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. Ji bo rakirina Fermana Dell | Veavakirinê saz bike û jê rake files û demkî files, run the following command: dpkg –purge command-configure
2. Ji bo rakirina Hapi û rakirina veavakirinê files û demkî files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. Guhertoya Fermana Dell nûve bikin | Li ser pergalê mîheng bikin.

NOT: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files û peldankên li ser pergalê. Ew files û peldank bandorek fonksiyonel tune.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. Untar the file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh –nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. Untar the file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. Ji bo nûvekirinê, emrê jêrîn bicîh bikin:
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. Ji bo verastkirina Fermana Dell ya heyî | Guhertoya mîheng bikin, biçin riya sazkirinê ya xwerû û bixebitin:
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

Ev beş serpêhatiyek pêşkêşî dikeview of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

Mijar:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

NOT: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

Pêşdibistanên

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server payloads.

Piştrast bikin ku daxwazên jêrîn têne bicîh kirin:

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   Wizard sazkirinê tê nîşandan.
2. Select the Dell Command Secure Bios Configuration Server option.
3. Bikirtînin Next.
4. Bikirtînin Install ji bo destpêkirina sazkirinê.
   The installation completion wizard is displayed.
5. Ji bo qedandina sazkirinê bikirtînin Finish.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   NOT: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file li URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   NOT: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file bi yên jêrîn:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   "Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   NOT: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   NOT: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

NOT: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

Afirandina hawîrdorek pêş-sazkirina wêneya bootable bi karanîna Windows PE 10.0 û 11.0

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. Ji Microsoft webmalper, dakêşin û Windows ADK-ê li ser pergala xerîdar saz bikin.
   NOT: Di dema sazkirinê de tenê hilbijêrin Amûrên Bicihkirinê and Windows Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. Fermana Dell saz bike | Veavakirin.
4. Fermana Dell entegre bike | Struktura pelrêçê di ISO-yê de mîheng bikin file ji bo afirandina wêneyek ISO-ya bootable.

Yekkirina Fermana Dell | Struktura pelrêçê di ISO-yê de mîheng bikin file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. Pergala xebitandinê ya Windows 11 saz bikin.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86_64.
2. Serlêdana fermanê bi mafên rêveberê vekin.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   NOT: Piştrast bikin ku riya ku di fermanê de tê bikar anîn ya Fermana Dell e | Peldanka mîheng bike.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

Çavkanî û piştgirî

Hûn dikarin bi bijartina hilberê xwe bigihîjin belgeyên pêwîst.

1. Biçe Piştgirî | Dell.
2. Bikirtînin Hemî hilberan bigerin.
3. Bikirtînin Software & Solutions.
4. Bikirtînin Birêvebiriya pergalên xerîdar.
5. Bikirtînin Dell Command | Configure.
6. Bikirtînin Select This Product.
7. Ber view belgeyên pêwîst, li ser navê hilbera pêwîst û hejmara versiyonê bikirtînin.

NOT: Ger pêwendiyek weya Înternetê ya çalak tune be, hûn dikarin agahdariya têkiliyê li ser fatûreya kirîna xwe, pelika pakkirinê, fatûra, an kataloga hilberên Dell-ê bibînin.

Dell provides several online and telephone-based support and service options. Availability varies by country or region and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. Biçe Piştgiriyê | Dell.
2. Kategoriya piştevaniya xwe hilbijêrin.
3. Li welat an herêma xwe verast bikin Welatek / Herêmek hilbijêrin lîsteya drop-down li binê rûpelê.
4. Li gorî hewcedariya we karûbarê guncan an girêdana piştgiriyê hilbijêrin.