1. Hilbera Serîview
The Hormann FIT 2-1 BS Push Button is a 2-button wireless transmitter designed for controlling automated systems. It operates at a frequency of 868.35 MHz and utilizes BiSecur technology for secure communication. This device allows for the control of two different motorizations or two distinct functions on the same automated system. It is intended exclusively for indoor use in a dry environment.
The push button is easy to install and is powered by two 1.5V LR03/AAA batteries, which are included. The package also contains an installation manual and mounting accessories to facilitate setup.
Wêne 1: Pêşî view of the Hormann FIT 2-1 BS Wireless Push Button, showing the two control buttons.
2. Specifications Teknîkî
| Nîşan | Hormann |
| Referansa Modelê | 4511695 |
| Pîvan (L x W x H) | 80 x 80 x 36 mm |
| Pircarînî | 868.35 MHz |
| Hejmara Bişkokên | 2 |
| Hejmara kanalan | 2 |
| Navê min | 2 x 1.5V LR03/AAA batteries (included) |
| Pîvan | 0.2 kg (90 grams according to specifications) |
| Rêjeya Jîngehê | IP 20 (Indoor use only) |
3. Compatibility
The Hormann FIT 2-1 BS is compatible with Hormann motorizations that utilize BiSecur technology. It is also retro-compatible with older 868 MHz fixed code motorizations.
Compatible motorizations include:
- SupraMatic
- ProMatic
- RotaMatic
- LineaMatic
- VersaMatic
It can also be used with key switches such as:
- ESA 40
- ESU 40
- BEPN 40
- STUP 40
- BEPN 50
- STUP 50
Important: Verify compatibility with your existing motorizations before installation.
4. Sazkirin û Sazkirin
The Hormann FIT 2-1 BS push button is designed for easy installation. It comes with all necessary mounting accessories.
4.1. Unpacking û Kontrola Destpêkê
- Carefully unpack the push button and all accessories.
- Piştrast bikin ku hemî pêkhateyên ku di pakêtê de hatine navnîş kirin hene.
- Amûrê ji bo zirarek xuyayî kontrol bikin.
4.2. Sazkirina Pîl
The device is powered by two 1.5V LR03/AAA batteries. These are typically pre-installed or included separately.
- Locate the battery compartment, usually on the back or side of the unit.
- Qapaxa dabeşê vekin.
- Insert the two LR03/AAA batteries, ensuring correct polarity (+/-).
- Qapaxa beşa pîlê bi ewlehî bigire.
Wêne 2: Alî view of the push button, indicating the location of the battery compartment.
4.3. Mounting the Push Button
The push button must be installed in a dry, indoor environment.
- Choose a suitable indoor location for mounting, ensuring it is dry and easily accessible.
- Use the provided mounting accessories (screws, wall plugs) to securely attach the push button to the wall.
- Ensure the device is firmly fixed and does not wobble.
4.4. Programming the Buttons
The programming procedure links the push button to your Hormann motorization(s).
- Refer to the detailed programming instructions provided in the included manual.
- Typically, this involves activating a programming mode on your motorization unit and then pressing the desired button on the FIT 2-1 BS push button.
- Repeat the process for the second button if you wish to control another motorization or function.
- Test the functionality after programming to ensure successful pairing.
5. Telîmatên Operating
Once programmed, operating the Hormann FIT 2-1 BS is straightforward.
- Bitikîne upper button to activate the first programmed function or motorization (e.g., open/close garage door).
- Bitikîne lower button to activate the second programmed function or motorization (e.g., partial opening, light control).
- The device transmits a secure BiSecur signal to your receiver.
Wêne 3: Bişkavkirî view of the push button, highlighting the two distinct control surfaces.
6. Maintenance
The Hormann FIT 2-1 BS requires minimal maintenance to ensure reliable operation.
6.1. Paqijkirin
- Wipe the surface of the push button with a soft, dry cloth.
- Paqijkerên aşınker, çareserker, an kîmyewiyên dijwar bikar neynin, ji ber ku ev dikarin zirarê bidin cîhazê.asing.
6.2. Guhertina Pîl
When the batteries are low, the device's indicator light (if present) may flash or its range may decrease. Replace batteries as follows:
- Beşa bateriyê wekî ku di Beşa 4.2-an de hatiye ravekirin vekin.
- Remove the old 1.5V LR03/AAA batteries.
- Insert new 1.5V LR03/AAA batteries, observing correct polarity.
- Pîlên kevin li gorî rêziknameyên herêmî bavêjin.
7. Destpêkirin
If the push button is not functioning as expected, consider the following:
- No response from motorization:
- Kontrol bike ka pîl bi rêkûpêk hatine danîn û neqediyane. Ger pêwîst be biguherîne.
- Ensure the push button is within the operating range of the motorization's receiver.
- Verify that the push button is correctly programmed to the motorization. Refer to the programming instructions.
- Check for any obstructions between the push button and the receiver that might block the signal.
- Operasyona navber:
- This could indicate low battery power. Replace the batteries.
- Ensure there is no significant radio interference in the area.
- Push button not mounting securely:
- Ensure you are using appropriate screws and wall plugs for your wall type.
- Avoid over-tightening screws, which can damage the casing.
If problems persist after following these steps, consult the full product manual or contact Hormann customer support.
8. Agahiyên Ewlekariyê û Hişyarî
- The push button must be installed exclusively in a dry, indoor environment. Wê li ber şilbûn, baran, an germahiyên zêde nehêlin.
- Amûrê venekin casing beyond the battery compartment, except for authorized service personnel.
- Pîl ji destê zarokan dûr bigirin. Ger were daqurtandin, bilez li bal bijîşkî bigerin.
- Ensure proper disposal of used batteries according to local environmental regulations.
- Ev amûr ne pêlîstok e. Ji zarokan dûr bixin.
- Always ensure the area around the motorization is clear before operating to prevent injury or damage.
Wêne 4: Alî view of the push button, illustrating its compact design and potential security indicators.
9. Agahdariya Garantiyê
Specific warranty details for the Hormann FIT 2-1 BS Wireless Push Button are not provided in the product description. Please refer to the warranty card included with your purchase or contact your retailer for information regarding warranty terms and conditions.
10. Piştgirî û Têkilî
Contact information for direct customer support is not provided in the product description. For technical assistance, troubleshooting, or further inquiries, please refer to the official Hormann webmalperê an jî bi firoşkarê ku we berhem jê kirî re têkilî daynin.
