1. Destpêk
The Lectrosonics DPR-A is a state-of-the-art digital plug-on transmitter designed for professional audio applications. It offers a unique design that seamlessly integrates with any microphone or line-level source via a standard XLR connector. This manual provides detailed instructions for the proper setup, operation, and maintenance of your DPR-A transmitter.
Key features include a wide tuning range across the UHF television band, selectable output power, and robust AES 256-CTR encryption for secure transmissions. Its external antenna ensures exceptional operating range and reliability.
2. Agahdariya Ewlekariya Girîng
Please read and follow all safety instructions carefully to prevent damage to the device or injury to yourself.
- Amûrê li ber avê an jî şilbûna zêde nehêlin.
- Avoid extreme temperatures. Operate the device within its specified temperature range.
- Hewl nedin ku yekîneyê bi xwe vekin an jî tamîr bikin. Hemû tamîrkirin ji karmendên pispor re bişînin.
- Tenê pîlên taybetî bikar bînin û wan bi rêkûpêk bavêjin.
- Dema ku amûrê dixebitînin, hewakirina guncaw peyda bikin.
- Dûr negihêjin zarokan.
3. Pêkhateyên Berhemê û Kontrol
Familiarize yourself with the various parts and controls of your DPR-A transmitter.
jimar 3.1: Lectrosonics DPR-A Digital Plug On Transmitter showing the XLR connector, control panel with LCD, and antenna connector.
3.1. Kontrol û Nîşana Panela Eniya
- Display LCD: Shows frequency, battery status, audio levels, menu options, and other operational information.
- MENU/SEL Button: Used to enter menus and select options.
- Bişkojka BACK: Used to return to the previous menu or exit a setting without saving.
- Bişkojka Hêzê (⑂): Press and hold to power the unit on or off.
- jor (↑) û jêr (↓) Buttons: Used to navigate menu options and adjust values.
- PWR KEY LED: Indicates power status and key lock.
- Audio Level Indicators (-10, -20): LEDs indicating input audio signal levels.
3.2. Girêdan
- XLR Connector (Male): Standard 3-pin XLR for connecting microphones or line-level audio sources.
- Antenna Connector (SMA): For attaching the external antenna.
4. Guide Setup
Follow these steps to prepare your DPR-A transmitter for operation.
4.1. Sazkirina Pîl
- Locate the battery compartment (typically on the side or bottom of the unit).
- Berga beşa pîlê vekin.
- Insert fresh batteries, observing the correct polarity (+/-) as indicated inside the compartment.
- Qapaxa beşa pîlê bi ewlehî bigire.
4.2. Microphone/Line Source Connection
- Align the XLR connector of your microphone or audio source with the XLR input on the DPR-A transmitter.
- Bi tundî bipêçe heta ku bikeve cihê xwe, da ku girêdanek ewle çêbibe.
4.3. Girêdana Antenna
- Screw the supplied antenna onto the SMA antenna connector on the side of the transmitter.
- Tighten the antenna finger-tight; do not overtighten.
5. Operasyon
This section details how to operate your DPR-A transmitter.
5.1. Hêzdarkirina / Off
- Hêzdarkirin: Bişkojka Hêzê bikirtînin û bigirin (⑂) for approximately 2 seconds until the display illuminates.
- Ji bo Veqetandinê: Bişkojka Hêzê bikirtînin û bigirin (⑂) for approximately 2 seconds. The display will show a power-down confirmation; release the button to confirm.
5.2. Navîgasyon Pêşek
- Rojnamevanî MENU/SEL ku têkevin menuya sereke.
- Bi kar tînin Up (↑) û Jêr (↓) buttons to scroll through menu options.
- Rojnamevanî MENU/SEL again to select a highlighted option or enter a sub-menu.
- Bikaranîn Up (↑) û Jêr (↓) to change values or settings.
- Rojnamevanî MENU/SEL to confirm a setting, or PAŞ bêyî tomarkirinê derkevin.
- Rojnamevanî PAŞ repeatedly to return to the main operating screen.
5.3. Frequency Selection
The DPR-A can tune from 470.100 to 607.950 MHz.
- From the main menu, navigate to the "Frequency" or "Tune" option.
- Bi kar tînin Up (↑) û Jêr (↓) buttons to adjust the frequency in 100 kHz or 25 kHz steps.
- Rojnamevanî MENU/SEL to confirm the selected frequency.
5.4. Rêzkirina Hêza Hilberînê
The transmitter offers selectable output power of 25 mW or 50 mW.
- Navigate to the "Power" or "RF Power" setting in the menu.
- Select either 25 mW or 50 mW using the Up (↑) û Jêr (↓) bişkokên.
- Rojnamevanî MENU/SEL ji bo tomarkirina mîhengê.
5.5. Encryption (AES 256-CTR)
The DPR-A supports AES 256-CTR encryption for secure communication. Refer to the detailed encryption setup instructions in the full Lectrosonics manual for key generation and synchronization procedures.
6. Maintenance
Proper care and maintenance will extend the life of your DPR-A transmitter.
6.1. Paqijkirin
- Derveyê yekîneyê bi qumaşek nerm û hişk paqij bikin.
- Ji bo qirêjiya serhişk, piçek d bikar bîninamp qumaşê bi sabûna nerm bişon, paşê tavilê hişk paqij bikin.
- Paqijkerên aşınker, çareserker, an kîmyewiyên dijwar bikar neynin.
6.2. Lênêrîna Pîl
- Ger amûr demek dirêj neyê bikaranîn, pîlan derxînin da ku rê li ber rijandinê were girtin.
- Her tim pîlên bi kalîteya bilind bikar bînin.
6.3. Storage
- Wergir li cîhekî sar, hişk û dûr ji tîrêjên rojê yên rasterast û germahiyên zêde hilînin.
- Protect the unit from physical shock and vibration.
7. Destpêkirin
This section addresses common issues you might encounter with your DPR-A transmitter.
| Pirsegirêk | Sedema gengaz | Çare |
|---|---|---|
| Yekîn hêz nade. | Pîlên mirî an jî bi şaşî hatine sazkirin. | Pîlan biguherînin an jî polarîteyê kontrol bikin. |
| No audio output from receiver. | Incorrect frequency setting; transmitter not powered on; microphone not connected. | Verify frequency matches receiver; ensure transmitter is on; check microphone connection. |
| Poor operating range or signal dropouts. | Antenna not properly connected; interference; low output power. | Ensure antenna is securely attached; check for sources of interference; increase output power if necessary. |
| Dîmender tarî ye an jî bersivê nade. | Low battery; extreme temperature. | Replace batteries; move unit to a moderate temperature environment. |
If the problem persists after trying these solutions, please contact Lectrosonics customer support.
8. Specifications
Technical specifications for the Lectrosonics DPR-A Digital Plug On Transmitter.
- Cins: DPR-A
- Rêjeya Frekansê: 470.100 - 607.950 MHz (UHF TV Band)
- Pêngavên Tengkirinê: 100 kHz an 25 kHz
- Hêza derketinê: Selectable 25 mW or 50 mW
- Şîfrekirin: AES 256-CTR
- Ketina Deng: Standard XLR connector (microphone/line level)
- Girêdana Antenna: Tîpa SMA
- Giraniya Babetê: 2 lîre
- ASIN: B0CPTLS5RX
- Dîroka Yekem Berdest: 6 Tebax 2024
9. Agahdariya Garantiyê
Lectrosonics products are covered by a limited warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the warranty card included with your purchase or visit the official Lectrosonics webmalper. Delîla kirîna xwe ji bo îdiayên garantiyê biparêzin.
10. Piştgiriya Mişterî
For technical assistance, service, or additional information, please contact Lectrosonics customer support:
- Webmalper: www.lectrosonics.com/support
- Telefon: Binêre webmalpera ji bo hejmarên têkiliyê yên herêmî.
- Email: Binêre website for support email addresses.
When contacting support, please have your product model (DPR-A) and serial number ready.
