1. Destpêk
The FLAMMA FC02 Mini Reverb Pedal is a compact digital guitar effects pedal designed to add rich, ambient reverb to your sound. It features three distinct reverb effects and intuitive controls, all housed in a durable metal casing. This manual provides essential information for setting up, operating, and maintaining your FC02 pedal.
Image 1.1: The FLAMMA FC02 Mini Reverb Pedal, showcasing sêwirana wê ya kompakt û nexşeya kontrolê.
2. Taybetmendî
- Three Reverb Effects: Choose between Studio, Church, and Plate reverb types.
- Rêbaza Rastî: Ensures your guitar signal remains unaltered when the pedal is disengaged.
- Sêwirana Compact: Mini pedal size for efficient pedalboard space utilization.
- Avakirina Dorable: Metalê tevahî casing with a frosted texture for longevity.
- Kontrolên intuitive: DECAY, MIX, and TONE knobs for precise sound shaping.
Image 2.1: Visual representation of the three distinct reverb effects available on the FC02 pedal.
3. Kontrol û Girêdan
Familiarize yourself with the pedal's controls and connection points:
Image 3.1: Detailed diagram of the FC02 pedal's controls and connection points.
- Footswitch: Bandorê çalak dike an jî betal dike.
- Nîşana LED: Dema ku bandor çalak e ronî dibe.
- Kûçika MIX: Adjusts the blend between the dry (unaffected) and wet (effected) signal.
- Bişkojka DECAY: Controls the length or duration of the reverb tail.
- Input Jack: 1/4 inch (6.35mm) mono audio input for your instrument.
- Reverb Type Switch: Selects between Studio, Church, and Plate reverb effects.
- Jack Output: 1/4 inch (6.35mm) mono audio output to your amplifier or next pedal.
- Kûçika TONE: Adjusts the tonal character of the reverb effect.
- Ketina DC 9V: Power supply connection (center negative, 9V DC, minimum 210mA).
4. Sazkirin
- Têkiliya Hêzê: Connect a 9V DC power adapter (center negative, minimum 210mA) to the DC 9V input jack. The power adapter is not included with the pedal.
- Girêdana Amûrê: Connect your guitar or other instrument to the Input Jack using a 1/4 inch instrument cable.
- AmpGirêdana lifier: Girêdan bike Jack Output ji we re amplifier or the input of the next pedal in your signal chain using a 1/4 inch instrument cable.
- Signal Chain Placement: Reverb pedals are typically placed towards the end of your effects chain, after modulation and drive pedals, but before delay pedals if you prefer a distinct delay effect. Experiment with placement to find your preferred sound.
Image 4.1: The FC02 pedal connected in a typical guitar signal chain.
5. Telîmatên Operating
- Engaging/Disengaging the Effect: Press the footswitch to toggle the reverb effect on or off. The LED indicator will illuminate when the effect is active.
- Selecting Reverb Type: Use the 3-way toggle switch to select your desired reverb effect:
- Studio: A versatile room reverb effect.
- Dêr: A large, expansive reverb with a deep, natural response.
- Temsîk: A classic plate reverb simulation.
Image 5.1: The reverb type selection switch.
- Adjusting DECAY: Bizivirîne XIRBEBÛN knob clockwise to increase the length of the reverb tail, and counter-clockwise to shorten it.
Image 5.2: Adjusting the DECAY knob.
- Adjusting MIX: Bizivire LIHEVXITIN knob to control the balance between your original guitar signal and the added reverb effect. A higher setting increases the reverb's prominence.
Image 5.3: Adjusting the MIX knob.
- Adjusting TONE: Bi kar tînin DENG knob to shape the brightness or darkness of the reverb effect.
6. Maintenance
- Paqijî: Ji bo paqijkirina derveyê pedalê qumaşek nerm û hişk bikar bînin. Ji paqijker an çareserkerên aşınker dûr bisekinin.
- Embarkirinî: Pedalê li hawîrdorek hişk, dûr ji germahiyên zêde û tîrêjên rasterast ên rojê hilînin.
- Lênêrîna Kabloyê: Ensure all cables are in good condition and properly connected to prevent signal loss or damage.
- Navê min: Always use a compatible 9V DC center-negative power supply to avoid damage to the unit.
7. Destpêkirin
- Deng tune:
- Hemî girêdanên kabloyê (têketin, derketin, hêz) kontrol bikin.
- Ensure the power supply is correctly connected and providing the specified 9V DC.
- Verify that your instrument and amplifier are functioning correctly.
- Dengê Qels an Çewtkirî:
- Yekbûna kabloyê kontrol bikin.
- Ensure the power supply meets the minimum current requirement (210mA).
- Adjust the MIX and TONE knobs to ensure desired effect levels.
- Dengê Nexwestî:
- Piştrast bike ku tu dabînkirina hêzê ya birêkûpêk bikar tînî.
- Check for ground loops if using multiple pedals.
- Ensure all cables are shielded and in good condition.
8. Specifications
| Taybetî | Hûrî |
|---|---|
| Cins | FC02 |
| Effects | Studio, Church, Plate Reverb |
| Ketin/Derketin | 1/4 inch (6.35mm) Mono Audio Jack |
| Pêdiviya hêzê | 9V DC (center negative), minimum 210mA |
| Pîvan (L x W x H) | 3.27" x 1.85" x 2.05" (83mm x 47mm x 52mm) |
| Pîvan | 153 Gram (5.4 onsan) |
| Mal | Hesinî |
| Processing Signal | Digital |
Image 8.1: Physical dimensions of the FC02 pedal.
9. Garantî û Piştgirî
For detailed warranty information, product support, or service inquiries, please refer to the official FLAMMA website or contact FLAMMA customer service directly.
