1. Destpêk
The FLAMMA FS06 Digital Preamp Pedal is a compact guitar effects pedal designed to provide a wide range of amplifier tones. It features 7 distinct preamp models, built-in cabinet simulation, and the ability to save custom presets. This manual provides detailed instructions for setting up, operating, and maintaining your FS06 pedal.
Image 1.1: The FLAMMA FS06 Digital Preamp Pedal.
2. Naveroka pakêtê
- FLAMMA FS06 Digital Preamp Pedal
- Rêberê Zû
- FLAMMA Logo Sticker
Image 2.1: Contents of the FLAMMA FS06 package.
3. Setup û Girêdanên
3.1 Dabînkirina hêzê
The FS06 pedal requires a Dabînkirina hêzê ya 9V DC with a current output of ji 303 mA zêdetir. The power supply is not included. Ensure the correct polarity and sufficient current to prevent operational issues.
3.2 Connecting Your Pedal
The FS06 can be integrated into various audio setups:
- To a Guitar Amplifier's Power Amp: Connect the pedal's output to the power amp input of your guitar ampzindîtir.
- Direct to a Power Ampzindîtir: Connect the pedal's output directly to a dedicated power ampzindîtir.
- To an Audio Interface/Headphone Amplifier/Monitor Speaker/Mixer: Utilize the built-in cabinet simulation by connecting the pedal's output directly to these devices.
Image 3.1: Input jack of the FS06 pedal.
Image 3.2: Output jack of the FS06 pedal.
Image 3.3: FS06 connected to a mixer, utilizing cabinet simulation.
4. Operasyon
4.1 Kontrol li serview
The FS06 pedal features several knobs and a footswitch for tone shaping and preset management:
- BASS: Bersiva frekansa nizm rast dike.
- MID: Adjusts the middle-frequency response.
- TRE (Treble): Bersiva frekansa bilind rast dike.
- DEŞT: Hêjmara hilberîna giştî kontrol dike.
- QEZENC: Adjusts the amount of overdrive/distortion.
- SAVE SELECT Button: Used to select preamp models and save presets.
- Footswitch: Toggles the pedal on/off or switches between preamp channels, depending on the selected mode.
Image 4.1: Control knobs and their functions.
Image 4.2: Footswitch functionality.
4.2 Pêşîamp Models
The FS06 offers 7 distinct preamp models, each designed to emulate classic and modern guitar amplifier tones. An LED indicator shows the currently selected effect.
| Jimare | Nav | Amp Model Basis |
|---|---|---|
| 1 | DELUXEBLUE | Based on Fender® Blues Deluxe |
| 2 | AC31 | Based on Vox® AC30 |
| 3 | CORAL REEF | Based on Two Rock® Coral |
| 4 | PLEX 50 | Li ser bingeha Marshall® Plexi 50 |
| 5 | BLUE EYE 100 | Based on Friedman® BE-100 |
| 6 | MB 5th Gen | Based on Mesa Boogie® MARK V |
| 7 | HVE 5151 | Based on EVH® 5150 |
Wêne 4.3: Serview of the 7 preamp modelên.
4.3 Tomarkirina Mîhengên Pêşwext
Her pêşamp model has two channels, allowing you to save a unique preset for each. To save your settings:
- Select your desired preamp model using the SAVE SELECT button.
- Adjust the BASS, MID, TRE, LEVEL, and GAIN knobs to your preferred settings.
- Press and hold the SAVE SELECT button until the LED indicator flashes, confirming the preset has been saved to the current channel.
This allows you to recall your customized tones instantly during performance or practice.
5. Maintenance
To ensure the longevity and optimal performance of your FLAMMA FS06 pedal, follow these maintenance guidelines:
- Paqijî: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners or solvents, which can damage the finish.
- Embarkirinî: Store the pedal in a dry environment, away from extreme temperatures, direct sunlight, and high humidity.
- Handling: Handle the pedal with care. Avoid dropping it or subjecting it to strong impacts.
- Erk: Dema ku pedal ji bo demek dirêj nayê bikar anîn, her gav dabînkirina elektrîkê qut bikin.
6. Destpêkirin
6.1 No Sound or Weak Signal
- Pêşkêşkirina hêzê kontrol bikin: Ensure the pedal is connected to a 9V DC power supply with sufficient current (over 303mA). Insufficient current can lead to improper operation or no sound.
- Têkiliyên Kabloyê: Verify all audio cables are securely connected to the input and output jacks.
- Volume/Level Settings: Check the LEVEL knob on the pedal and the volume settings on your amplifier an navrûya deng.
- Moda Derbasbûnê: If the pedal is in bypass mode, ensure your amplifier or other effects are functioning correctly.
6.2 Unexpected Behavior
- Çîroka Hêzê: Disconnect and reconnect the power supply to reset the pedal.
- Veavakirina Kargehê: Refer to the official FLAMMA website or contact support for instructions on performing a factory reset if issues persist.
7. Specifications
| Taybetî | Specification |
|---|---|
| Hejmara Model | FS06 |
| Babetê Weight | 10.5 ons (0.3 Kilogram) |
| Mezinahiya Hilberê | 2.75 x 1.97 x 4.78 înç (7 x 5 x 12.1 cm) |
| Cureyê materyalê | Hesinî |
| Çavkaniya Hêzê | Corded Electric |
| Voltage | 9 Volt DC |
| Forma sînyala | Digital |
| Navrûya Alavê | 1/4-inch Audio |
| Preamp Models | 7 |
| Saveable Presets | Yes (2 channels per preamp cins) |
| Cabinet Simulation | Avakirin |
8. Garantî û Piştgirî
For warranty information, technical support, or further inquiries, please visit the official FLAMMA webmalperê an rasterast bi karûbarê xerîdar a wan re têkilî daynin. Rapora kirîna xwe wekî delîla kirînê ji bo îdîayên garantiyê biparêzin.
FLAMMA Official Webmalper: Visit the FLAMMA Store on Amazon
