Pêşkêş
The LAUNCH CRP129 Premium is a professional diagnostic tool designed for automotive technicians and enthusiasts. It provides comprehensive diagnostic capabilities for four major vehicle systems: Engine, Transmission (A/T), Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS/Airbag). This device supports all 10 test modes of OBD II, including enhanced OBD II Mode 6, and offers advanced reset functions for Oil Service Light, Electronic Parking Brake (EPB), Steering Angle Sensor (SAS), and Battery Management System.
With its intuitive interface, 4.0-inch TFT full-color display, and robust design, the CRP129 Premium allows users to efficiently read and clear diagnostic trouble codes (DTCs), view live data streams, freeze frame data, and I/M readiness status. It supports a wide range of vehicle makes and models, providing a powerful solution for diagnosing drive-ability issues and performing essential maintenance tasks.
Naveroka pakêtê
- 1x LAUNCH CRP129 Premium Diagnostic Tool
- 1x OBDII Cable
- 1x Kabloya Barkirinê (USB)
- 1x Çentê Hilgirtinê
- 1x Rêbernameya Bikarhêner (ev belge)
Sazkirin û Bikaranîna Destpêkê
Follow these steps to set up and begin using your CRP129 Premium diagnostic tool:
- Porta OBD-II bibînin: The OBD-II (On-Board Diagnostics II) port is typically located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's owner's manual if you cannot locate it.
- Connect the OBDII Cable: Plug one end of the provided OBDII cable into the 16-pin connector on the CRP129 Premium device.
- Girêdana Wesayîtê: Plug the other end of the OBDII cable into the vehicle's OBD-II port. The device will power on automatically, drawing power directly from the vehicle's battery.
- Hêzdarkirin: Once connected, the CRP129 Premium will power on. The screen will display the LAUNCH logo and then the main menu.
- Hilbijartina Ziman: If prompted, select your preferred language (English, Spanish, or French are supported).
Image: The CRP129 Premium diagnostic tool being held and connected to a vehicle's OBD-II port, illustrating the setup process.
Telîmatên Operating
The CRP129 Premium features a user-friendly interface with a 4.0-inch color display and intuitive button operation. Use the directional pad (up, down, left, right) to navigate menus, the "OK" button to confirm selections, and the "ESC" button to go back.
Wêne: Pêşî view of the CRP129 Premium, highlighting its display and navigation buttons for operation.
Fonksiyonên Diagnostic
- Skenkirina Sîstemê: Select "Diagnose" from the main menu. The tool will automatically identify the vehicle and scan for available systems (Engine, Transmission, ABS, SRS).
- Kod bixwînin: Displays current, pending, and permanent Diagnostic Trouble Codes (DTCs) for the selected system. Each code comes with a brief description.
- Kodên Paqij Bikin: Erases DTCs from the vehicle's computer. Ensure the underlying issue is resolved before clearing codes to prevent them from reappearing.
- Herikîna Daneyên Zindî: Displays real-time data parameters from the vehicle's sensors. Data can be viewed in numerical or graphical format. Key parameters include engine speed, vehicle speed, coolant temperature, O2 sensor position, MAF/airflow, and short/long term fuel trims.
- Daneyên Çerçoveya Serbestkirin: Captures a snapshot of sensor data at the moment a DTC was set, providing valuable information for diagnosis.
- Rewşa Amadebûna I/M: Rewşa çavdêrên têkildarî emîsyonê kontrol dike da ku diyar bike ka wesayît ji bo ceribandina emîsyonê amade ye an na.
- Enhanced OBD II Mode 6: Provides access to test results for non-continuously monitored systems.
Fonksiyon Reset
The CRP129 Premium offers several special reset functions:
- Vesazkirina Çira Xizmeta Rûnê: Resets the oil maintenance light after an oil change.
- Electronic Parking Brake (EPB) Release: Allows for safe deactivation and reactivation of the electronic parking brake system for brake pad replacement.
- Steering Angle Sensor (SAS) Reset: Calibrates the steering angle sensor after steering system repairs or alignment.
- Vesazkirina Pîlê: Performs battery registration or adaptation after replacing the vehicle's starter battery.
Nûvekirinên Nermalavê
The CRP129 Premium supports lifetime free internet updates via USB 2.0. To update the software:
- Serdana LAUNCH-a fermî bikin website (refer to the device's packaging or back label for the exact URL).
- Download and install the update tool software on your PC.
- Connect the CRP129 Premium to your PC using the provided USB cable.
- Follow the on-screen instructions in the update tool to download and install the latest software versions for your device.
Maintenance û Lênêrînê
- Paqijî: Ji bo paqijkirina cîhazê qumaşek nerm û hişk bikar bînin. Paqijker an çareserkerên aşınker bikar neynin.
- Embarkirinî: Store the device in its carrying bag in a cool, dry place away from direct sunlight and extreme temperatures.
- Lênêrîna Kabloyê: Avoid bending or twisting the OBDII cable excessively. Always grasp the connector when plugging or unplugging.
- Nûvekirinên Nermalavê: Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models.
Çareserkirina pirsgirêkan
If you encounter issues with your CRP129 Premium, consider the following common troubleshooting steps:
- Cîhaz Nakeve:
- Ensure the OBDII cable is securely connected to both the device and the vehicle's OBD-II port.
- Verify the vehicle's ignition is in the ON position (engine can be off).
- Check the vehicle's fuse for the OBD-II port (usually labeled "CIGAR" or "ACC").
- Çewtiya ragihandinê:
- Confirm the vehicle supports the OBD-II standard (most vehicles from 1996 onwards).
- Ensure the ignition is ON.
- Ji bo dûrxistina pirsgirêkek taybetî ya wesayîtê, hewl bidin ku bi wesayîtek cûda ve girêbidin.
- Check for any loose connections in the OBDII cable.
- Incorrect Readings/Codes:
- Piştrast bike ku nermalav nûjen e.
- Verify the vehicle information (VIN, year, make, model) is correctly identified by the tool.
For persistent issues, refer to the official LAUNCH support resources or contact their customer service.
Taybetmendiyên Teknîkî
Image: The back of the CRP129 Premium device, displaying its technical specifications label.
| Taybetî | Specification |
|---|---|
| Pêşkêşî | 4.0" TFT full color display |
| Voltage Range | 12Vdc (via OBD interface) |
| Germahiya xebitandinê | 0°C heta 50°C (32°F heta 122°F) |
| Germahiya Storage | -20°C heta 70°C (-4°F heta 158°F) |
| Dimensions | 196 x 106 x 32 mm |
| Pîvan | Approx. 680 g |
| Têkilî | Standardized 16-pin OBD connector, USB 2.0 |
| Protokolên piştgirî kirin | J1850 PWM, J1850 VPW, ISO9141-2, ISO14230-4, ISO 15765 (CAN) |
| Reng | Sor |
| Çêker | Launch Tech |
Piştgirî û Garantî
For technical support, product inquiries, or warranty information, please contact LAUNCH customer service. Details can typically be found on the official LAUNCH webmalper an pakêta hilberê. Rapora kirîna xwe wekî delîla kirînê ji bo îdîayên garantiyê biparêzin.
Regular software updates are available for free to ensure your device remains compatible with the latest vehicle models and diagnostic protocols.
