JFA Power Supply and Charger User Manual

1. Destpêk

Thank you for choosing the JFA Power Supply and Charger. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

1.1 Agahiyên Ewlekariyê

• Always connect the power supply to a grounded outlet.
• Amûrê nexin ber şilbûn an germahiya zêde.
• Ji bo pêşîlêgirtina germbûna zêde, hewaya rast bicîh bikin.
• Berî ku hûn her tamîrkirin an paqijkirinê bikin, elektrîkê veqetînin.
• Do not attempt to open or repair the unit yourself. Refer to qualified service personnel.

2. Hilbera Serîview

The JFA Power Supply and Charger is designed to provide stable power and efficiently charge batteries. It features an intelligent charging system (SCI) to optimize battery life and performance.

2.1 Components

• Digital Display: Volumê di dema rast de nîşan didetage or current readings.
• Voltage Indicator LEDs: Indicate the current voltage asta.
• Current Indicator LEDs: Indicate the current amperage.
• Reading Mode Selector: Button to switch between voltage and current display.
• Operation Mode Selector: Button to select different operating modes or charging profiles.
• Charge Indicator LEDs: Show the battery's charge status (e.g., 15%, 50%, 80%, Full).
• Fanê sarkirinê: Located on the side for thermal management.
• Termînalên derketinê: Connectors for power output and battery charging.

3. Rêwerzên Sazkirinê

3.1 Vekirin

Carefully remove the JFA Power Supply and Charger from its packaging. Inspect the unit for any signs of damage during transit. If damage is found, do not use the device and contact customer support.

3.2 Cihkirin

Place the unit on a stable, flat surface in a well-ventilated area. Ensure there is sufficient space around the cooling fan for unrestricted airflow. Avoid placing it near heat sources or in direct sunlight.

3.3 Girêdana bi Power

1. Piştrast bikin ku dabînkirina hêzê qut bûye.
2. Connect the AC power cord to the power supply unit.
3. Plug the other end of the AC power cord into a standard, grounded electrical outlet.

3.4 Connecting to Battery/Load

1. Identify the positive (+) and negative (-) output terminals on the JFA Power Supply and Charger.
2. Connect the positive (+) cable from your battery or load to the red (+) terminal on the power supply.
3. Connect the negative (-) cable from your battery or load to the black (-) terminal on the power supply.
4. Ensure all connections are secure and free from short circuits.

4. Telîmatên Operating

4.1 Hêzdarkirin/Off

• To power on, flip the main power switch to the "ON" position. The digital display and indicator LEDs will illuminate.
• To power off, flip the main power switch to the "OFF" position.

4.2 Displaying Voltage û Niha

Bi kar tînin Reading Mode Selector button on the control panel to toggle between displaying the output voltage and the output current on the digital display. The corresponding indicator LED (Tensão for Voltage, Corrente for Current) will light up to show the active display mode.

4.3 Barkirina Pîlê

1. Ensure the battery is correctly connected to the output terminals as described in Section 3.4.
2. Hêza li ser yekîneyê.
3. Select the appropriate charging mode using the Hilbijêra Moda Operasyonê button. Refer to the device's specific charging profiles if available (e.g., "Auto SCI 14.4V").
4. Çavdêriya Charge Indicator LEDs to track the battery's charging progress (15%, 50%, 80%). The "Bateria Carregada" (Battery Charged) LED will illuminate when charging is complete.
5. Once fully charged, you may disconnect the battery or leave it connected for maintenance charging if the unit supports it.

5. Maintenance

5.1 Paqijkirin

Before cleaning, ensure the unit is powered off and disconnected from the AC outlet and any connected batteries/loads. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or solvents, as they may damage the finish or internal components. Keep the cooling fan vents clear of dust and debris.

5.2 Storage

When not in use for extended periods, store the power supply in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is disconnected from all power sources.

6. Destpêkirin

7. Specifications

8. Garantî û Piştgirî

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official JFA webmalper. Delîla kirîna xwe ji bo îdiayên garantiyê biparêzin.

Têbînî: Merc û şertên garantiyê yên taybetî dikarin li gorî herêm û firoşkar cûda bibin.