Pirtûka Rêwerzê ya Sensora Înfrared a Bêtêl a Pasîf a Intelbras IVP 2000 SF

1. Destpêk

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Agahiyên Ewlekariyê

• Berî sazkirinê û xebitandinê hemî rêwerzan bi baldarî bixwînin.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Amûrê ji destê zarokan dûr bigirin.

3. Naveroka pakêtê

Piştrast bike ku hemî tişt di pakêtê de hene:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x Çêlka Çêkirinê
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. Hilbera Serîview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

jimar 1: Pêşde view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Pêkhateyên sereke:

• PIR Lens: Detects infrared radiation from moving bodies.
• Nîşana LED: Provides status feedback (e.g., detection, low battery).
• Parçeya pîlê: Houses the power source.
• Xalên Çêkirinê: For secure installation on a wall.
• Tamper Switch: Triggers an alarm if the sensor cover is opened.

5. Sazkirin

5.1. Sazkirina Pîl

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Sazkirina Sensorê

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Ji bo nîşankirina pozîsyonên pêçanê yên li ser dîwêr, çîçeka lêdanê wekî şablonek bikar bînin.
3. Li cihên nîşankirî qulan bikolin û pêvekên dîwêr têxin nav wan.
4. Bi karanîna pêçên peydakirî, braketa montajê bi dîwêr ve rast bikin.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Bixebitandina Sensorê

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. Rewşa Nîşana LED

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• Bê Ronahî: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. Maintenance

7.1. Paqijkirin

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Guhertina Pîl

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Kontrolên bi rêkûpêk

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. Destpêkirin

9. Specifications

• Nîşan: Intelbras
• Cins: IVP2000SF
• Çavkaniya hêzê: Battery powered
• Tîpa Pîl: Alkaline
• Tîpa sazkirinê: Çiyayê dîwarê
• Amûrên Lihevhatî: Intelbras security systems and smart home hubs
• Mezinahiyên hilberê: Nêzîkî 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 înç)
• Rêbaza Tespîtkirinê: Infrareda Pasîf (PIR)
• Rêjeya Tespîtkirinê: Heta 12 metre (39 ling)
• Angle Detection: Nêzîkî 90 derece
• Jîngeha Xebatê: Tenê karanîna hundurîn

10. Agahdariya Garantiyê

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webmalperê an jî bi piştgiriya xerîdaran re têkilî daynin. Ji bo îdîayên garantiyê delîla kirîna xwe biparêzin.

11. Piştgirî

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Webmalper: Visit the official Intelbras webmalper ji bo çavkaniyên piştgiriyê, FAQs, û agahdariya têkiliyê.
• Telefon: Refer to the contact section on the Intelbras webmalper ji bo hejmarên piştgiriyê yên herêmî.