1. Destpêk
Thank you for choosing the Zipper ZI-CR382 Pet Enclosure. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new pet enclosure. Please read this manual thoroughly before beginning assembly or use to ensure proper setup and to maximize the lifespan of your product.
The Zipper ZI-CR382 is a spacious and durable outdoor enclosure designed to provide a secure and comfortable environment for various small animals. Its modular design allows for straightforward assembly.
2. Telîmatên Ewlekariyê
Di dema komkirin û karanînê de her tim ewlehiyê bidin pêşiyê. Neşopandina van rêwerzan dikare bibe sedema birîndarî an zirara hilberê.
- Civîna Mezinan Pêwîst e: This product requires assembly by adults. It is recommended that at least two adults participate in the assembly process for safety and ease.
- Parçeyên kontrol bikin: Before assembly, carefully inspect all components for any damage. Do not proceed with assembly if any parts are damaged. Contact customer support for replacements.
- Rûyê Stable: Assemble the enclosure on a flat, level, and stable surface to prevent tipping or instability.
- Lengerkirina Ewle: Ensure the enclosure is properly anchored to the ground to prevent it from being moved by wind or animals. Additional anchoring may be required in windy conditions.
- Perwanekirin: While the enclosure provides shelter, ensure adequate ventilation for the animals housed within, especially during hot weather.
- Animal Supervision: Always supervise animals within the enclosure, especially when first introducing them or during extreme weather conditions.
- Kevirên tûj: Be cautious of potential sharp edges on metal components during assembly. Wear appropriate protective gloves.
- Ewlehiya Zarokan: Keep children away from the assembly area. The enclosure is not a toy and should not be used for play.
- Lênerrînî: Regularly inspect the enclosure for any signs of wear, damage, or loose connections. Address issues promptly to maintain structural integrity.
3. Naveroka pakêtê
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact Zipper customer support.
- Galvanized Steel Frame Tubes (Ø 25 x 0.65 mm)
- Modular Interlocking Connectors
- PVC-Coated Galvanized Wire Mesh Rolls
- UV-Resistant Sunshade Film
- Galvanized Door Assembly
- Fastening Hardware (e.g., bolts, nuts, cable ties)
Figure 3.1: Fully assembled Zipper ZI-CR382 Pet Enclosure. This image provides an overview of the complete structure, including the frame, mesh, and sunshade.
4. Setup û Meclîsa
Follow these steps carefully to assemble your Zipper ZI-CR382 Pet Enclosure. It is highly recommended to have at least two people for assembly.
- Malperê amade bikin: Choose a flat, level, and well-drained area for the enclosure. Clear any debris, rocks, or sharp objects from the ground.
- Çarçoveya bingehîn kom bikin: Connect the galvanized steel tubes to form the rectangular base of the enclosure using the modular interlocking connectors. Ensure all connections are secure.
Figure 4.1: Detail of a modular interlocking connector. These connectors are used to join the galvanized steel tubes, forming the frame of the enclosure.
- Erect the Vertical Supports and Roof Frame: Attach the vertical support tubes to the base frame using the appropriate connectors. Then, assemble the roof frame structure, connecting it to the top of the vertical supports. Ensure all bolts and fasteners are tightened securely.
- Install the Door Frame: Integrate the galvanized door assembly into the designated section of the frame. Ensure the door swings freely and latches securely.
- Tora Têlê Bipêve Bikin: Unroll the PVC-coated galvanized wire mesh and attach it to the frame. Start from one end and work your way around, securing the mesh tightly to the frame using the provided fastening hardware (e.g., cable ties). Ensure there are no gaps that animals could escape through or predators could enter.
Wêne 4.2: Ji nêzîk ve view of the PVC-coated galvanized wire mesh. This mesh provides security and durability for the enclosure walls.
- Install the Sunshade Film: Drape the UV-resistant sunshade film over the designated roof sections. Secure it firmly to the frame using the provided fasteners to prevent it from being dislodged by wind.
- Final Inspection and Anchoring: Once assembly is complete, perform a thorough inspection to ensure all connections are tight, the mesh is secure, and the door operates correctly. Anchor the entire structure firmly to the ground using appropriate stakes or anchors (not explicitly listed as included, but implied by "matériel de fixation" and safety instructions).
Figure 4.3: The Zipper ZI-CR382 Pet Enclosure installed in an outdoor environment. This image illustrates the enclosure's appearance when fully set up in a grassy area.
5. Telîmatên Operating
Using your Zipper ZI-CR382 Pet Enclosure is straightforward. Follow these guidelines for optimal use:
- Navketin: Use the galvanized door for easy entry and exit. Always ensure the door is securely latched when animals are inside to prevent escape.
- Cihkirin: Position the enclosure in an area that provides adequate shade and protection from extreme weather conditions. The UV-resistant sunshade offers protection from direct sunlight.
- Danasîna Heywanan: When introducing new animals to the enclosure, monitor their behavior closely to ensure they adapt well to their new environment.
- Water and Food: Always provide fresh water and appropriate food within the enclosure. Ensure food and water dishes are stable and cannot be easily tipped over.
- Paqijî: Regularly clean the enclosure to maintain a hygienic environment for your pets. Refer to the Maintenance section for detailed cleaning instructions.
6. Maintenance
Regular maintenance will extend the life of your Zipper ZI-CR382 Pet Enclosure and ensure the safety of your animals.
- Paqijkirina rûtîn:
- Remove animal waste and soiled bedding daily.
- Clean the wire mesh and frame periodically with a mild detergent and water. Rinse thoroughly to remove all soap residue.
- Inspect the sunshade film for dirt buildup and clean gently with a soft cloth and water. Avoid abrasive cleaners.
- Muayeneya Avahiyê:
- Periodically check all frame connections, bolts, and fasteners to ensure they are tight and secure. Tighten any loose components.
- Inspect the wire mesh for any signs of damage, such as bends, breaks, or rust. Repair or replace damaged sections promptly to maintain security.
- Examine the door hinges and latch for smooth operation and security. Lubricate if necessary.
- Verify that the enclosure remains securely anchored to the ground, especially after strong winds or heavy rain.
- Zivistanî (heke hebe): In areas with heavy snow or extreme cold, consider disassembling and storing the enclosure indoors, or ensure snow load is regularly removed from the roof to prevent damage.
7. Destpêkirin
This section addresses common issues you might encounter with your pet enclosure.
| Pirsegirêk | Sedema gengaz | Çare |
|---|---|---|
| Qefes ne aram an jî lerzok xuya dike. | Loose connections; uneven ground; insufficient anchoring. | Ensure all frame connections are tightened. Relocate to a level surface or use shims. Add additional ground anchors. |
| Tora têlî xwar e an jî valahî hene. | Insufficiently secured during assembly; damaged mesh. | Re-secure mesh to the frame using more cable ties or fasteners. If mesh is damaged, repair with wire or replace the section. |
| Derî bi rêkûpêk nayê girtin an jî kilît nayê girtin. | Misalignment of door frame; bent hinges or latch mechanism. | Check door frame alignment and adjust if possible. Straighten bent hinges or latch components. Ensure no debris is obstructing the latch. |
| Sunshade film is flapping or detached. | Inadequate fastening; strong winds. | Re-secure the sunshade film using all available fastening points. Consider adding extra fasteners in windy areas. |
8. Specifications
Key technical specifications for the Zipper ZI-CR382 Pet Enclosure:
- Cins: ZI-CR382
- Nîşan: Circirk
- Pîvan (L x W x H): 800 cm x 300 cm x 250 cm (8m x 3m x 2.5m)
- Pîvan: 67 kg
- Material Frame: Galvanized Steel Tubes (Ø 25 x 0.65 mm)
- Mesh Material: PVC-Coated Galvanized Wire Mesh
- Sunshade Material: UV-Resistant Film
- Reng: Zîv/Gewrî
- Taybetmendiyên Taybet: Durable, Modular Interlocking System, UV-Resistant Sunshade
Figure 8.1: Dimensional diagram of the Zipper ZI-CR382 Pet Enclosure. This illustration provides key measurements for length, width, and height, including door dimensions.
9. Garantî û Piştgirî
Specific warranty information for the Zipper ZI-CR382 Pet Enclosure is not provided within this manual. For details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or visit the official Zipper website.
For technical support, missing parts, or any other inquiries, please contact Zipper customer service through their official channels. Have your product model number (ZI-CR382) and purchase details ready when contacting support.
