1. Destpêk
This manual provides essential instructions for the installation, operation, and maintenance of your FSP iFP600 Uninterruptible Power Supply (UPS). Please read this manual thoroughly before installing or operating the unit to ensure proper function and safety. The FSP iFP600 is designed to provide reliable power backup and surge protection for your electronic devices.
Wêne 1.1: Pêşî view of the FSP iFP600 UPS, showcasing its compact design and integrated LCD display.
2. Telîmatên Ewlekariyê
Please adhere to these important safety guidelines during installation, operation, and maintenance of the UPS:
- UPS c venekinasing. Di hundir de ti parçeyên ku ji hêla bikarhêner ve werin tamîrkirin nînin. Hemû tamîrkirin ji karmendên tamîrê yên pispor re bişînin.
- Do not connect appliances that could overload the UPS, such as laser printers, vacuum cleaners, or heaters.
- Piştrast bike ku UPS bi prizek hêza AC ya erdî ve girêdayî ye.
- Avoid placing the UPS in direct sunlight, near heat sources, or in environments with excessive dust, humidity, or corrosive substances.
- Position the UPS in a well-ventilated area to prevent overheating.
- In case of fire, use a dry chemical extinguisher. Water can be hazardous.
- Pîla di hundirê UPS-ê de ji hêla bikarhêner ve nayê guheztin. Guhertina pîlê divê tenê ji hêla karmendên pispor ve were kirin.
3. Hilbera Serîview
The FSP iFP600 UPS provides reliable power protection for your critical electronics. It features a compact design and an intuitive LCD display for monitoring status.
3.1 Naveroka pakêtê
Dema vekirina pakêtê, ji kerema xwe piştrast bikin ku hemî pêkhate li wir in û zirar nedîtine:
- FSP iFP600 UPS Unit
- Manual Bikarhêner (ev belge)
- Cord Power
- Cable Têkiliya USB
Image 3.1: The FSP iFP600 UPS shown alongside its retail packaging, illustrating the product's presentation.
3.2 Pêkhateyên Panela Paşîn
Familiarize yourself with the connections on the rear panel of the UPS:
Wêne 3.2: Bi hûrgilî view of the FSP iFP600 UPS rear panel, highlighting connection points.
- Dergeh: Two SCHUKO type outlets for connecting protected equipment.
- Ketina AC: Connects the UPS to the main utility power.
- Fuse/Breaker: Overcurrent protection for the UPS.
- Danûstandina USB: Port for connecting to a computer for monitoring and management.
- Combo RJ11/RJ45 Surge Protection: Provides surge protection for telephone/network lines.
4. Sazkirin û Sazkirin
Follow these steps to set up your FSP iFP600 UPS:
- Vekirin: UPS-ê bi baldarî ji pakêta wê derxînin. Ji bo zirara barkirinê kontrol bikin.
- Cihkirin: Place the UPS on a flat, stable surface in a clean, cool, and well-ventilated area. Ensure adequate clearance around the unit for airflow.
- Barkirina Destpêkê: Connect the UPS to a standard grounded AC outlet using the provided power cord. Allow the unit to charge for at least 4-6 hours before initial use to ensure optimal battery performance. The UPS will charge whether it is turned on or off.
- Amûrên Têkilî: Plug your computer, monitor, and other critical electronic devices into the UPS outlets (A). Do not connect surge suppressors or power strips to the UPS outlets.
- USB Communication (Optional): Connect the USB cable from the UPS USB port (D) to your computer's USB port to enable power management software features (software not included, typically downloaded from manufacturer's webmalper).
- RJ11/RJ45 Protection (Optional): For surge protection of your telephone or network line, connect the incoming line to the 'IN' port of the Combo RJ11/RJ45 (E) and connect the 'OUT' port to your device.
5. Telîmatên Operating
5.1 Hêzdarkirin/Off
- Hêzdarkirin: Press and hold the power button on the front panel for approximately 2 seconds until you hear a beep and the LCD display illuminates.
- Ji bo Veqetandinê: Press and hold the power button for approximately 2 seconds until you hear a beep and the LCD display turns off.
5.2 Agahiyên Dîmendera LCD
The FSP iFP600 features an LCD display that provides real-time status information. The display is touch-sensitive for navigating information.
Image 5.1: The LCD display of the FSP iFP600 UPS, indicating voltage output and its touch-screen functionality.
The LCD display typically shows:
- Volta Inputtage
- Output Voltage
- Asta Barkirina Pîlê
- Asta barkirinê
- Operating Mode (e.g., AC mode, Battery mode)
- Warning/Fault Indicators
5.3 Battery Mode Operation
When the utility power fails or fluctuates outside acceptable limits, the UPS will automatically switch to battery mode. During battery mode, the UPS will provide power to connected equipment from its internal battery. An audible alarm will sound to indicate battery operation.
6. Maintenance
Proper maintenance ensures the longevity and reliability of your UPS.
- Paqijî: Use a soft, dry cloth to clean the exterior of the UPS. Do not use liquid or aerosol cleaners.
- Lênêrîna Pîl: To maximize battery life, ensure the UPS is connected to AC power and fully charged. If the UPS is stored for an extended period, recharge it every three months to prevent battery degradation.
- Guhertina Pîl: The internal battery (12V / 7Ah x1) is not user-serviceable. Battery replacement should only be performed by FSP-certified service personnel or a qualified technician. Incorrect battery replacement can pose a risk of explosion or injury.
- Embarkirinî: Store the UPS in a cool, dry place with adequate ventilation. Ensure the battery is fully charged before storage.
7. Destpêkirin
Refer to the following table for common issues and their solutions. If the problem persists, contact FSP support.
| Xûya | Alarm dengdar | Sedema gengaz | Çare |
|---|---|---|---|
| UPS operating on battery power | Her 10 saniyeyan carekê deng dide | Utility power failure or fluctuation | Save work and shut down equipment if power outage is prolonged. UPS will return to AC mode when power is restored. |
| Hişyariya pîlê kêm | Her saniye deng dide | Şarja bateriyê gelekî kêm e | Immediately save work and shut down connected equipment. |
| Rewşa zêde barkirinê | Her 0.5 saniyeyekê deng dide | Connected equipment exceeds UPS capacity | Disconnect non-essential equipment until the alarm stops. Ensure total load is within UPS capacity. |
| xeletiya UPS | Berdewam bipek | Xeletî an xeletiya hundurîn | Turn off the UPS and disconnect it from the AC outlet. Contact FSP technical support. |
Image 7.1: Excerpt from the FSP iFP series specification table, detailing alarm indicators and their meanings.
8. Specifications
Detailed technical specifications for the FSP iFP600 UPS:
| Taybetî | Specification |
|---|---|
| Cins | iFP 600 |
| Kanîn | 600 VA / 360 W |
| Volta Inputtage | 110/120 Vac or 220/230/240 Vac |
| Volta Inputtage Range | 81-145 Vac / 140-290 Vac |
| Range Frequency Input | 60/50 Hz (hîskirina otomatîk) |
| Output Voltage | 110/120 Vac or 220/230/240 Vac |
| AC Voltage Rêzkirin (Moda Batt.) | ±10% |
| Output Frequency Range (Batt. Mode) | 60 Hz or 50 Hz ±1 Hz |
| Dema Veguheztinê | Tîpîkî 2-6 ms |
| Waveform (Moda Batt.) | Simulated Sinewave |
| Tîp & Hejmara Pîlê | 12V / 7Ah x1 |
| Dema Recharge Tîpîk | 4 demjimêran heta 90% kapasîteyê |
| Indicators | LCD Display (Touch panel with digital information) |
| Parastinî | Overload, Discharge, and Overcharge Protection |
| Babetê Weight | 9.24 pound (4.2 kg) |
| Mezinahiyên hilberê (LxWxH) | 11.81 x 3.98 x 5.59 inches |
| Reng | Reş |
| Mal | Hesinî |
9. Garantî û Piştgirî
FSP products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official FSP website. For technical support, troubleshooting assistance, or service inquiries, please contact FSP customer service through their official channels.
Hûn dikarin bêtir agahdarî û çavkaniyên piştgiriyê li ser bibînin FSP Store on Amazon.
