Pirtûka Bikarhêner a Paqijkera Toz a Robotê ya eufy BoostIQ RoboVac 11S (Slim)

Pêşkêş

This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your eufy BoostIQ RoboVac 11S (Slim) robot vacuum cleaner. Please read this manual thoroughly before using your RoboVac and retain it for future reference.

Telîmatên Ewlekariya Girîng

Always follow basic precautions, including:

• Berî ku amûrê bikar bînin hemî rêwerzan bixwînin.
• Do not operate the RoboVac in areas with open flames or flammable materials.
• Por, cil û bergên berbelav, tiliyên xwe û hemû beşên laş ji vebûn û beşên tevgerê dûr bigirin.
• Tenê wekî ku di vê manualê de hatî destnîşan kirin bikar bînin.
• Bê tozê û/an fîlteran li cihê xwe bikar neynin.
• Destûr nedin ku zarok bi amûrê bilîzin.
• Only use the power adapter supplied by the manufacturer.
• Do not use the appliance to pick up large debris, liquids, or sharp objects.

Naveroka pakêtê

• 1 x eufy BoostIQ RoboVac 11S (Slim)
• 1 x Remote control (AAA batteries included)
• 1 x Charging Base & Power Adapter
• 1 x Amûra Paqijkirinê
• 2 x Side Brushes (additional pair)
• 1 x Filter Set (additional set)
• 1 x Manual Bikarhêner
• 1 x Rêbernameya Destpêka Zû
• 1 x Agahiyên Garantî

Damezirandin

1. Prepare the RoboVac

• Remove all protective films and stickers from the RoboVac and charging base.
• Attach the side brushes by pressing them onto the square posts until they click.

2. Install the Charging Base

Place the charging base on a hard, level surface against a wall. Ensure there is at least 3 feet (1 meter) of clear space to either side and 6 feet (2 meters) in front of the charging base. Connect the power adapter to the charging base and a wall outlet. The indicator light on the charging base will illuminate.

Image: RoboVac automatically returning to its charging base.

3. Xerca Destpêkê

Place the RoboVac onto the charging base, ensuring the charging pins align. For first-time use, charge the RoboVac for at least 12 hours. The indicator light on the RoboVac will breathe orange while charging and turn solid blue when fully charged.

Operating Your RoboVac

1. Power On / Off

Press and hold the power button on the RoboVac for 3 seconds to turn it on or off. The indicator light will turn blue when on.

2. Modên Paqijkirinê

The RoboVac offers several cleaning modes, selectable via the remote control:

• Paqijkirina Xweser: The RoboVac cleans automatically using various cleaning patterns. This is the default mode.
• Paqijkirina cîh: For concentrated cleaning of a specific area. The RoboVac will clean in a spiral pattern for approximately 2 minutes.
• Paqijkirina qiraxa: The RoboVac cleans along walls and furniture edges.
• Paqijkirina Odeya Yekane: The RoboVac cleans a single room and then returns to its charging base.

Image: Remote control for selecting cleaning modes and scheduling.

3. Teknolojiya BoostIQ

The RoboVac automatically increases suction power when extra vacuuming strength is needed, such as when transitioning from hard floors to carpets. This feature activates in approximately 1.5 seconds.

Image: RoboVac activating BoostIQ for increased suction on carpet.

4. Plansazkirin

Use the remote control to set a cleaning schedule for your RoboVac. Refer to the remote control section in the full manual for detailed instructions on setting schedules.

Lênerrînî

Regular maintenance ensures optimal performance of your RoboVac.

1. Valakirina Qutiya Tozê

Empty the dust bin after each use. Press the dust bin release button and pull out the bin. Open the dust bin cover and discard debris.

Image: The dust bin removed from the RoboVac, showing collected debris.

2. Paqijkirina Parzûnan

Remove the filters from the dust bin. Tap them to remove dust and rinse them under running water. Allow filters to air dry completely before reinstalling. Replace filters every 3-6 months, or as needed.

Image: Diagram illustrating the multi-layer filter system of the RoboVac.

3. Cleaning the Rolling Brush and Side Brushes

Remove the rolling brush cover and lift out the rolling brush. Use the cleaning tool to remove hair and debris. Clean the side brushes by pulling them off and removing any tangled hair or debris. Replace worn side brushes.

4. Cleaning the Sensors and Charging Contacts

Wipe the drop sensors, charging contacts, and swivel wheel with a dry cloth to maintain proper function.

Çareserkirina pirsgirêkan

Specifications

Garantî û Piştgirî

Your eufy BoostIQ RoboVac 11S (Slim) comes with a Garantiya 12 mehan. For technical support, warranty claims, or additional information, please refer to the warranty information card included in your package or visit the official eufy support website.