Product Overview
The DS18 6XL600-8 is a high-performance 6.5-inch mid-range loudspeaker designed for professional car audio systems. It delivers clear and powerful sound with a robust construction for durability and optimal acoustic performance. This speaker is engineered to provide a wide frequency response and high sensitivity, ensuring an immersive audio experience.
Di Box çi ye
- DS18 6XL600-8 Mid-Range Loudspeaker (1 unit)
- Manual Instruction
Taybetmendiyên Teknîkî
| Cins | 6XL600-8 |
| Awa | Mid-Range Loudspeaker |
| Mezinayî | 6.5 inches |
| Hêza RMS | 300 Watt |
| MAX Power | 600 Watt |
| Impedance | 8 Ohm |
| Hesasiyet (1W/1m) | 97dB |
| Bersiva Frequency | 60Hz-12.5KHz |
| Deng Coil Diameter | 2 inches |
| Magnet Material | Ferrite |
| Giraniya Magnet | 34 oz |
| Mounting Depth | 3.44 înç (87.5 mm) |
| Pîvana qutkirî | 5.9 înç (150 mm) |
| Frame Material | Red Aluminum Basket |
| Material Material | Non-Pressed Paper Cone |
Sazkirin û Sazkirin
Proper installation is crucial for optimal performance and longevity of your DS18 6XL600-8 loudspeaker. It is recommended to have professional installation for car audio components.
Çêkirina Speaker
Ensure the mounting location has sufficient depth (3.44 inches) and a cut-out diameter of 5.9 inches. Use appropriate mounting hardware to secure the speaker firmly, minimizing vibrations.

Wêne: Pêşî view of the DS18 6XL600-8 speaker, showing the non-pressed paper cone and DS18 logo.

Wêne: Paşve view of the DS18 6XL600-8 speaker, highlighting the push-to-connect terminals for wiring.
Têl û girêdan
Axaftvan bi hevgirtî ve girêdin amplifier. Ensure correct polarity (+ to + and - to -) to avoid phase issues. The speaker has an 8-Ohm impedance and can handle up to 300W RMS power. Match the amplifier's output impedance and power to the speaker's specifications for optimal performance and to prevent damage.
The strategically designed ventilation system helps dissipate heat, ensuring reliable performance during prolonged high-volume use.
Telîmatên Operating
Once installed and wired correctly, your DS18 6XL600-8 loudspeaker is ready for operation. Follow these guidelines for the best audio experience:
- AmpMîhengên lifier: Xwe saz bikin amplifier's gain levels appropriately. Start with low gain and gradually increase it until you achieve desired volume without distortion.
- Mîhengên Crossover: Utilize your amplifier's or head unit's crossover functions. For mid-range speakers, a high-pass filter is typically recommended to prevent low frequencies from reaching the speaker, which can cause distortion and damage. Refer to your amplifier's manual for specific crossover frequency recommendations.
- Kontrolkirina Volume: Avoid excessive volume levels that lead to audible distortion. Distortion can damage the speaker over time.
Maintenance û Lênêrînê
To ensure the longevity and continued performance of your DS18 6XL600-8 loudspeaker, follow these maintenance tips:
- Paqijî: Use a soft, dry cloth to gently wipe the speaker cone and frame. Avoid using harsh chemicals or abrasive materials that could damage the speaker's components.
- Şertên Jîngehê: Protect the speaker from direct exposure to excessive moisture, extreme temperatures, and direct sunlight for prolonged periods. While the aluminum basket offers durability, consistent exposure to harsh elements can degrade performance.
- Berçavderbasî: Periodically inspect the speaker for any signs of damage, loose connections, or wear and tear. Address any issues promptly to prevent further problems.
Çareserkirina pirsgirêkan
If you encounter issues with your DS18 6XL600-8 loudspeaker, refer to the following common troubleshooting steps:
- Deng tune:
- Hemû girêdanên têlan ji kabloyê kontrol bikin, ampji bo têkiliyek ewle û polarîteya rast, fîberê bi axaftvan ve girêdin.
- Piştrast bikin ku amplifier tê hêz kirin û bi rengek rast dixebite.
- Ensure the audio source (head unit, media player) is active and sending a signal.
- Dengê Xerab:
- Kêm bikin amplifier's gain setting. Excessive gain can lead to clipping and distortion.
- Check the crossover settings. Incorrect crossover points can cause the speaker to play frequencies it's not designed for, leading to distortion.
- Inspect the speaker cone for any physical damage.
- Voluma Kêm:
- Zêde bikin amplifier's gain gradually.
- Ensure the audio source's volume is turned up.
- Check for any loose or corroded wiring connections that might impede signal flow.
Medyaya Berhemê
Images

Image: DS18 6XL600-8 speaker shown in its retail packaging.

Image: DS18 6XL600-8 speaker with a clear view of the wiring terminals.

Wêne: Pêşî view of the DS18 6XL600-8 speaker, highlighting the cone and logo.

Wêne: Ji jor ber bi jêr ve view of the DS18 6XL600-8 speaker.

Wêne: Alî view of the DS18 6XL600-8 speaker, showing its profile.

Wêne: Nêzîk view of the DS18 6XL600-8 speaker's push terminals.

Wêne: Paşve view of the DS18 6XL600-8 speaker, showing the magnet and frame design.
Videos
Video: DS18 Mid-Range Loudspeakers overviewEv vîdyo nerînek giştî pêşkêş dikeview of DS18's mid-range loudspeaker line, including features and design.
Video: DS18 PRO XA 6.5 10th Anniversary Series Speaker. This video showcases the 10th Anniversary edition of the DS18 PRO XA 6.5 speaker, highlighting its design and features.
Video: PRO-GM6B Midrange loudspeaker Specs. This video details the specifications of the PRO-GM6B midrange loudspeaker, providing technical insights.
Video: DS18 6.5" Pro Audio Midrange Speakers with Black Bullet Tweeter. This video features the DS18 6.5" Pro Audio Midrange Speakers, showcasing their design and the integrated black bullet tweeter.
Video: PRO-X6.4BMPK Tech Talk and Specs. This video provides a technical discussion and detailed specifications for the PRO-X6.4BMPK speaker.
Garantî û Piştgirî
The DS18 6XL600-8 Mid-Range Loudspeaker comes with a Limited Warranty. For detailed warranty terms, service, or technical support, please refer to the official DS18 webmalperê an bi karûbarê xerîdar a wan re têkilî daynin.
Hûn dikarin biçin serdana DS18 Store Ji bo bêtir hilber û agahdarî li ser malperan bigerin.