Walrus Audio Iron Horse Lm308 Distortion V2 Guitar Effects Pedal User Manual

1. Destpêk

The Walrus Audio Iron Horse Lm308 Distortion V2 is a high-gain guitar effects pedal designed to deliver a wide spectrum of distortion tones. From thick, warm overdrive to aggressive, saturated high-gain sounds, this pedal offers versatility for various musical styles. The V2 iteration includes updated controls for enhanced usability and tonal shaping.

2. Taybetmendî

• Classic Distortion Tones: Delivers thick, punchy, and rowdy distortion.
• Updated Level Control: Facilitates easier dialing in of unity gain.
• Enhanced Tone Control: Allows for a broader range of treble adjustment.
• Smoother Distortion Control: Provides a more refined range for dialing in lower gain tones.
• Three Distortion Modes: A toggle switch offers three distinct clipping diode options for varied compression and tonal characteristics.
• Avakirina Dorable: Housed in a robust enclosure with a unique Galaxy Gold finish and custom artwork.

3. Kontrol û fonksiyonên

The Iron Horse V2 features three primary control knobs and a three-way toggle switch to shape your sound.

Wêne 1: Pêşî view of the Walrus Audio Iron Horse V2 pedal, showing the Level, Tone, and Distortion knobs, along with the clipping toggle switch and footswitch.

• 3.1. Level Knob

  Controls the overall output volume of the pedal. Adjust this to achieve unity gain (output volume matches bypass volume) or to boost your signal.

• 3.2. Tone Knob

  Adjusts the treble content of the distorted signal. Turning it clockwise increases brightness, while turning it counter-clockwise reduces treble for a warmer sound.

• 3.3. Distortion Knob

  Determines the amount of gain and saturation applied to your signal. Rotate clockwise for more aggressive distortion and counter-clockwise for lighter overdrive or crunch tones.

• 3.4. Clipping Toggle Switch

  This three-position toggle switch selects between different clipping diode configurations, altering the pedal's compression and overall feel:

  • Helwesta Çep: Provides a moderate amount of compression.
  • Helwesta Navîn: Offers a wide-open, uncompressed signal, resulting in a more raw and dynamic distortion.
  • Helwesta Rast: Delivers a higher amount of compression, leading to a more saturated and sustained tone.

• 3.5. Bypass Footswitch

  Engages or disengages the distortion effect. When engaged, the LED indicator will illuminate.

4. Sazkirin

1. Têkiliya Hêzê: Connect a standard 9V DC power supply (center-negative) to the power input jack on the pedal. The Iron Horse V2 requires a minimum of 10mA.
2. Têkiliya Ketinê: Connect your guitar or other instrument to the INPUT jack on the right side of the pedal.
3. Têkiliya Derketinê: Jack OUTPUT li milê çepê yê pedal bi xwe ve girêdin amplifier an pedala din di zincîra sînyala we de.
4. Mîhengên destpêkê: Start with all knobs at noon (12 o'clock) and the toggle switch in the middle position for a balanced starting point.

Wêne 2: Bişkavkirî view of the Iron Horse V2, illustrating the input and output jack locations.

5. Telîmatên Operating

Once the pedal is properly connected and powered, you can begin to explore its tonal capabilities:

• Tevlêbûna bandorê: Press the footswitch to activate the distortion. The LED will light up. Press again to bypass the effect.
• Adjusting Distortion: Experiment with the Distortion knob to find your desired level of gain. Lower settings provide a gritty overdrive, while higher settings deliver full-on saturation.
• Shaping Tone: Use the Tone knob to brighten or darken your sound. This is crucial for matching the pedal to different guitars and amplifiers.
• Kontrolkirina Volume: Adjust the Level knob to ensure your volume is consistent when the pedal is engaged and bypassed, or to provide a volume boost for solos.
• Exploring Clipping Modes: The clipping toggle switch significantly alters the pedal's character.
  • For a more compressed, smoother distortion, try the Rast rewş.
  • For a raw, dynamic, and less compressed sound, use the Navîn rewş.
  • Ew Çep position offers a balanced compression, suitable for many applications.

6. Maintenance

• Paqijî: Use a soft, dry cloth to clean the pedal's enclosure. Avoid abrasive cleaners or solvents.
• Navê min: Always use a regulated 9V DC, center-negative power supply. Incorrect power can damage the unit and void the warranty.
• Embarkirinî: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Têkilî: Ensure all cables are securely connected to prevent signal loss or intermittent operation.

7. Destpêkirin

• Deng tune:
  • Check all cable connections (guitar to input, output to amp).
  • Verify the power supply is correctly connected and functioning.
  • Ensure the pedal is engaged (LED illuminated).
• Weak or Intermittent Signal:
  • Kabloyan ji bo zirara wan kontrol bikin.
  • Hêza dabînkirina hêzê piştrast bikintage and current are adequate (9V DC, at least 10mA).
  • Clean input/output jacks if corrosion is visible.
• Unwanted Noise/Hum:
  • Piştrast bike ku tu dabînkerê hêzê yê bi kalîte û îzolekirî bikar tînî.
  • Di zincîra sînyala xwe de ji bo lûpên erdê kontrol bikin.
  • Move the pedal away from power transformers or other sources of electromagnetic interference.

8. Specifications

jimar 3: Paş view of the Iron Horse V2 pedal.

9. Garantî û Piştgirî

Walrus Audio products are built with quality components and craftsmanship. For detailed information regarding warranty coverage, product registration, or technical support, please visit the official Walrus Audio webmalperê an rasterast bi karûbarê xerîdar re têkilî daynin. Belgê kirînê ji bo îdîayên garantiyê biparêzin.

For further assistance, please refer to the official Walrus Audio webmalper: www.walrusaudio.com