Pêşkêş
This manual provides essential information for the proper installation, operation, and maintenance of your Solera 280343 Gas Strut. This gas strut is designed for use with Solera awning arm assemblies, offering universal compatibility with both manual and power Solera awnings. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
Agahiyên Ewlekariyê
HIŞYARÎ: Neşopandina van rêwerzên ewlehiyê dikare bibe sedema birîndarbûna giran an zirara madî.
- Always ensure the awning is properly anchored and within its load-bearing capacity.
- Keep hands and other body parts away from moving parts when the awning is in use or being adjusted.
- Do not exceed the awning's weight capacity to prevent accidents.
- Always follow the manufacturer's instructions for installation, use, and maintenance.
- Gas struts are under high pressure. Do not puncture, heat, or open the strut.
- Wear appropriate personal protective equipment (PPE), such as eye protection and gloves, during installation.
Taybetmendiyên Hilberê
The Solera 280343 Gas Strut offers the following key features:
- 26-inch Reach: Extends to a full 26 inches when fully open.
- Berhevoka gerdûnî: Designed for use with both powered and manual Solera awnings.
- 124 lb Kapasîteya: Provides robust support for your awning.
- Sazkirina hêsan: Engineered for straightforward replacement.
- Adds Stability: Helps the awning extend and retract smoothly and securely.
This gas strut is universally compatible with Solera power and manual awnings, ensuring a broad range of applications for RVs, travel trailers, and motorhomes. The image shows a representative Solera awning extended, demonstrating the type of application for this gas strut.
Specifications
| Taybetmendî | Hûrî |
|---|---|
| Hejmara Model | 280343 |
| Nîşan | Solera |
| Çêker | Pêkhateyên Lippert |
| Dirêjbûn dirêj kirin | 26 inches (26.46" as per diagram) |
| Dirêjiya paşvekişandin | 15.04 inches (as per diagram) |
| Kanîn | 124 lb. |
| Reng | Reş |
| Babetê Weight | 1.2 lîre |
| Mezinahiyên hilberê (D x W x H) | 3"D x 30"W x 3"H (packaging/overall) |
| UPC | 848150012999 |
The image provides a visual representation of the approximate dimensions, including extended and retracted lengths, and pin diameters for accurate fitment.
Installation Guide
Replacing the Solera Gas Strut is typically a two-person task due to the tension involved. Follow these steps carefully. Refer to the product images for visual guidance on the strut itself.
Amûrên Pêdivî:
- Ladders, chairs, or other stable platforms for two people
- Pîrê derzî-poz
- Badankêş
- Çakûç
- 7/16 soket inch
- Duct tape (optional, for securing pushnuts)
- Four 3/8 inch pushnut washers (ne tê de, recommended to replace)
Gavên Sazkirinê:
- Prepare Awning: Fully extend the awning to relieve tension on the strut.
- Spacers rakin: Locate the two snap-in/out plastic spacers on each pin (typically at locations 3 and 4 on the awning arm). Carefully remove these with a screwdriver and save them for reinstallation.
- Remove Pushnut Washers: Using needle-nose pliers or a screwdriver and hammer, carefully remove all four pushnut washers. Eye protection is highly recommended as these can fly off. Consider using duct tape to create a "tent" around the pushnut to prevent it from flying.
- Support Awning: Have one person firmly hold the end of the awning to prevent it from collapsing once the strut is removed.
- Note Orientation: Before removal, observe the orientation of the existing gas strut to ensure the new one is installed correctly.
- Struta Kevin Rakirin: Remove the pins securing the old strut. You may need a hammer and screwdriver to gently encourage the pins to move. Your helper may need to slightly lift or adjust the awning end to align the holes.
- Install New Strut - Pin 1: Begin by installing the new gas strut in the correct orientation. First, insert and secure the pin at location 1. Use a 7/16 inch socket to press the new pushnut washer onto the pin by hand, while holding the opposite side of the pin.
- Install New Strut - Pin 2: Next, install the pin through the gas strut at location 2 and secure it with a new pushnut washer.
- Install New Strut - Pin 3: Have your helper lift the end of the awning to align the holes for pin 3. Install the pin and secure it with a new pushnut washer.
- Install New Strut - Pin 4: Similarly, have your helper lift the awning end to align the holes for pin 4. Install the pin and secure it with a new pushnut washer.
- Replace Spacers: Reinstall the plastic spacers onto pins 3 and 4.
Note: Without removing pin 4 (or the screw between pin 2 and 4), the gas strut will need to be compressed for installation, which can be very difficult. The method above avoids this by removing all pins.
Emelî
The Solera 280343 Gas Strut is a passive component designed to assist in the smooth extension and retraction of your Solera awning. Once installed, it works in conjunction with your awning's existing mechanism (manual or powered) to provide stability and ease of movement.
- Dirêjkirinî: As the awning extends, the gas strut will smoothly extend, providing support and preventing rapid deployment.
- Vekişandin: When retracting the awning, the gas strut will compress, assisting in the controlled closure of the awning.
- Always operate your awning according to its specific manual (manual or power awning). The gas strut enhances the functionality of the awning arm assembly.
Lênerrînî
The Solera Gas Strut is largely maintenance-free. However, regular inspection can prolong its lifespan and ensure continued safe operation.
- Kontrola birêkûpêk: Periodically inspect the strut for any signs of damage, corrosion, leaks, or bending. Check the mounting points for looseness or wear.
- Paqijbûnî: Keep the strut clean, especially the rod portion, to prevent dirt and debris from damaging the seal. Wipe with a clean, damp cil ger pêwîst be. Ji bikaranîna kîmyewiyên dijwar dûr bixin.
- Rûnkirin: Do not lubricate the rod or seals unless specifically instructed by the manufacturer. Most gas struts are designed to operate without external lubrication.
- Embarkirinî: If the RV or awning is stored for extended periods, ensure the awning is retracted and secured to protect the strut from environmental exposure.
Çareserkirina pirsgirêkan
If you experience issues with your awning's operation after installing or while using the Solera Gas Strut, consider the following common problems and solutions:
| Pirsegirêk | Sedema gengaz | Çare |
|---|---|---|
| Awning difficult to extend or retract | Strut losing pressure; incorrect installation; binding in awning arms. | Check strut for leaks or damage. Verify correct installation and alignment. Inspect awning arms for obstructions or damage. |
| Awning sags or does not hold position | Strut has failed (lost gas pressure). | Replace the gas strut. |
| Di dema xebatê de dengên neasayî | Loose mounting hardware; binding components; damaged strut. | Tighten all mounting hardware. Inspect awning arms and strut for any rubbing or damage. Replace strut if damaged. |
If troubleshooting steps do not resolve the issue, contact Solera customer support or a qualified RV technician.
Di Box çi ye
Your Solera 280343 Gas Strut package includes:
- 1 x Solera 280343 Gas Strut
Note: Mounting hardware, such as pushnut washers, are typically not included and may need to be purchased separately.
Garantî û Piştgirî
For warranty information and technical support regarding your Solera 280343 Gas Strut, please contact Lippert Components, the manufacturer of Solera products.
Lippert Components Customer Service:
- Serdana fermî bikin Solera Store on Amazon ji bo agahdariya hilberê.
- Refer to the contact information provided in your product packaging or on the official Lippert Components webmalper ji bo piştgiriya rasterast.
Dema ku hûn bi piştgiriyê re têkilî datînin, ji kerema xwe hejmara modela hilberê xwe (280343) û hûrguliyên kirînê amade bikin.
