Intel D875PBZ Motherboard User Manual

1. Destpêk

This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your Intel D875PBZ Motherboard. This product is designed for use with Intel Pentium 4 processors and features the Intel 875P chipset. Please read this manual thoroughly before proceeding with installation.

Wêne 1: Ji nêzîk ve view of the Intel D875PBZ model designation on the motherboard.

2. Sazkirin û Sazkirin

Follow these steps carefully to install your Intel D875PBZ Motherboard and its components.

2.1. Sazkirina Motherboard

1. Şasiyê amade bikin: Ensure your computer case is compatible with ATX form factor motherboards. Install the I/O plate into the rear opening of the chassis.
2. Motherboardê saz bike: Carefully align the motherboard with the standoffs in your chassis. Secure it using appropriate screws. Do not overtighten.

Wêne 2: Ji jor ber bi jêr ve view of the Intel D875PBZ motherboard, showing the CPU socket, RAM slots, and expansion slots.

2.2. CPU Installation (Socket 478)

1. Soketa CPUyê veke: Lift the lever on the Socket 478 CPU socket.
2. CPU-yê têxe: Align the triangular mark on the Intel Pentium 4 CPU with the corresponding mark on the socket. Gently place the CPU into the socket. Do not force it.
3. CPU-ya ewle: Lower the lever to lock the CPU into place.
4. Sarincokera CPU-yê saz bike: Note: A CPU cooler is NOT included with this product. Install a compatible Socket 478 CPU cooler (fan and heatsink) according to its manufacturer's instructions. Ensure proper thermal paste application and secure mounting for effective cooling.

2.3. RAM Installation (DDR)

1. Open RAM Slot Clips: Open the retention clips at both ends of the DDR RAM slots.
2. Insert RAM Modules: Align the notch on the DDR RAM module with the key in the RAM slot. Press down firmly on both ends of the module until the clips snap into place.

2.4. Girêdana Peripherals

1. Girêdanên Hêzê: Connect the 20-pin ATX main power connector and the 4-pin ATX 12V power connector from your power supply to the motherboard.
2. Amûrên hilanînê: Connect SATA drives to the SATA ports and IDE drives to the IDE connectors on the motherboard.
3. Kartên Berfirehkirinê: Install AGP graphics cards into the AGP slot and other expansion cards (e.g., sound cards, network cards) into the PCI slots.
4. Girêdanên Panela Pêşî: Connect the power switch, reset switch, HDD LED, and power LED cables from your chassis front panel to the corresponding pins on the motherboard. Refer to the motherboard's silkscreen labels for correct orientation.
5. USB and Audio: Connect front panel USB and audio headers if available on your chassis.

jimar 3: Paş view of the Intel D875PBZ motherboard, showing the various input/output ports including PS/2, serial, parallel, USB, Ethernet, and audio jacks.

3. Telîmatên Operating

3.1. Destpêkirina Destpêkê

1. Hêzdarkirin: After all components are securely installed and connected, connect your monitor, keyboard, and mouse. Power on your system.
2. BIOS Access: During the initial boot sequence, press the designated key (commonly DEL, F2, an F10) to enter the BIOS setup utility. Consult your screen for the exact key prompt.
3. Veavakirina BIOS: Configure boot order, date/time, and other system settings as needed. Save changes and exit the BIOS.

3.2. Sazkirina Pergala Xebitandinê

Insert your operating system installation media (e.g., CD/DVD) and follow the on-screen prompts to install the operating system. Ensure all necessary drivers for the chipset, audio, and network are installed after the OS installation for optimal performance.

4. Maintenance

Parastina birêkûpêk dibe alîkar ku motherboarda we ji bo demek dirêj û xebata domdar misoger bike.

• Rakirina tozê: Periodically open your computer case and use compressed air to remove dust buildup from the motherboard, CPU cooler, and other components. Dust can impede airflow and cause overheating.
• Kontrolên Têkiliyê: Ensure all power cables, data cables, and expansion cards are securely seated. Loose connections can lead to system instability.
• BIOS Battery: The motherboard uses a CR2032 coin cell battery to retain BIOS settings. If your system consistently loses time or BIOS settings, the battery may need replacement.

5. Destpêkirin

Ev beş pirsgirêkên hevpar ên ku hûn dikarin pê re rû bi rû bimînin çareser dike.

• Hêz tune ye/POST tune ye:
  • Verify all power cables (20-pin ATX, 4-pin 12V) are securely connected.
  • Ensure the CPU and RAM are correctly installed.
  • Check that the power supply is functioning correctly.
  • Remove all non-essential components (e.g., extra RAM, expansion cards) and attempt to boot with only the CPU, one RAM stick, and the graphics card.
• Nîşanek tune:
  • Ensure the monitor is connected to the graphics card (AGP) and powered on.
  • Reseat the graphics card. Try a different graphics card if available.
  • Check RAM installation. Faulty or improperly seated RAM can prevent display output.
• Bêîstîqrarî/Qetlîbûna Sîstemê:
  • Check CPU and chipset temperatures. Ensure CPU cooler is properly installed and fan is spinning.
  • Amûrên teşhîsa bîranînê bimeşînin da ku RAM-a xelet kontrol bikin.
  • Piştrast bike ku hemî ajokar nûjen in.
  • Ji bo girêdanên bêserûber an kabloyên xerabûyî kontrol bikin.
• Ji nû ve sazkirina BIOSê: To clear CMOS settings, locate the CLR_CMOS jumper on the motherboard (refer to the silkscreen). With the system powered off and unplugged, move the jumper from pins 1-2 to 2-3 for 5-10 seconds, then return it to 1-2. Alternatively, remove the BIOS battery for a few minutes.

6. Specifications

Key technical specifications for the Intel D875PBZ Motherboard:

7. Agahdariya Garantiyê

This product is typically covered by a limited warranty provided by the original seller or manufacturer. Please refer to your purchase documentation or contact your retailer for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.

8. Piştgiriya Teknîkî

For technical assistance, please refer to the official Intel support website or contact your product retailer. Online resources often include updated drivers, FAQs, and community forums that can provide further assistance.