Pêşkêş
Welcome to the instruction manual for your Earthquake Sound DB Street Pro Series 12-inch Car Subwoofer, model DB-12. This manual provides essential information for the proper setup, operation, and maintenance of your subwoofer to ensure optimal performance and longevity. Please read this manual thoroughly before installation and use.
Taybetmendiyên Hilberê
The DB Street Pro Series subwoofer is engineered for high performance in car audio systems. Key features include:
- Performansa Bilind: Designed for competition-grade car audio applications.
- Desthilatdariya hêzê: Capable of handling up to 1000 watts maximum power.
- Materyalên konê: Features a sandblasted pressed-pulp fiber cone for robust sound reproduction.
- Kulîlka Deng: Equipped with a 2-inch polyamide voice coil, operating at 4 ohms impedance.
- Dorgirtî: Utilizes a high-roll santroprene surround for enhanced excursion and durability.
- Pergala sarkirinê: Incorporates a "Turbo Prop" Cooling System (TCT) to maintain voice coil temperature during high power operation.
- Meknetîs: Features a thick, high-density magnet for powerful bass response.
Sazkirin û Sazkirin
Proper installation is crucial for the performance and safety of your subwoofer. It is highly recommended that installation be performed by a qualified professional car audio technician.
- Dorçîtkişanî: Select an appropriate sealed or ported enclosure that matches the subwoofer's specifications for optimal sound quality and output.
- Têlkirin: Ensure all wiring connections are secure and correctly polarized. Use appropriate gauge wiring for power and speaker connections to prevent power loss and overheating.
- AmpLifier Lihevhatina: Subwooferê bi an ve girêdin amplifier capable of delivering sufficient power (up to 1000 watts max) at a 4-ohm load. Mismatched impedance or insufficient power can damage the subwoofer or ampzindîtir.
- Çêkirin: Securely mount the subwoofer within the enclosure to prevent movement and ensure acoustic integrity.
Rêbernameyên Operasyonê
To achieve the best sound quality and extend the life of your subwoofer, follow these operational guidelines:
- Serdema Veqetandinê: Allow a break-in period for the subwoofer. During the first week of use, operate the subwoofer at approximately half its maximum wattage. This allows the suspension components to loosen and settle, optimizing performance and durability.
- AmpMîhengên lifier: Carefully adjust amplifier gain, crossover frequencies, and bass boost settings. Avoid setting the gain too high, which can lead to distortion and potential damage.
- Li Distortionê guhdarî bike: If you hear any distortion, reduce the volume or amplifier gain immediately. Continuous operation with distorted audio can cause permanent damage to the subwoofer.
Lênêrîn û Maintenance
Regular care will help maintain the appearance and performance of your subwoofer:
- Paqijî: Use a soft, dry cloth to gently wipe the cone and surround. Avoid using harsh chemicals or abrasive cleaners.
- Şertên Jîngehê: Protect the subwoofer from direct sunlight, extreme temperatures, and excessive moisture.
- Berçavderbasî: Periodically inspect the wiring and mounting for any signs of wear or loosening.
Çareserkirina pirsgirêkan
If you experience issues with your subwoofer, refer to the following common troubleshooting steps:
- Deng tune:
- Check all power and ground connections to the ampzindîtir.
- Verify speaker wire connections at both the subwoofer and ampzindîtir.
- Piştrast bike amplifier is powered on and receiving an audio signal.
- Dengê Xerab:
- Kêm bikin amplifier gain or head unit volume.
- Check for proper crossover settings; ensure the subwoofer is only receiving low-frequency signals.
- Inspect speaker wires for any shorts or damage.
- Basa Qels:
- Confirm the subwoofer is wired in phase with other speakers.
- Verify the enclosure volume and tuning are appropriate for the subwoofer.
- Ensure the break-in period has been completed.
Ger piştî van gavan pirsgirêk berdewam bikin, bi teknîsyenek dengî ya otomobîlê ya profesyonel re şêwir bikin.
Taybetmendiyên Teknîkî
| Specification | Giranî |
|---|---|
| Hejmara Model | DB-12 |
| Mezinahiya Speaker | 12 Inches |
| Maximum Output Power | 1000 Watt |
| Impedance | 4 Ohm |
| Deng Coil | 2-inch Polyamide |
| Material Material | Sandblasted Pressed-Pulp Fiber |
| Materyalên dorpêçê | High-Roll Santroprene |
| Mezinahiya Hilberê | 12.48 x 12.48 x 5.31 inches |
| Babetê Weight | 12 lîre |
| Çêker | Dengê Erdhejê |
Agahî Garantî
The Earthquake Sound DB Street Pro Series DB-12 Subwoofer comes with a Garantiya 5-salî. Please retain your proof of purchase for any warranty claims. For detailed terms and conditions of the warranty, refer to the official Earthquake Sound webmalper an bi piştgiriya xerîdar re têkilî daynin.
Piştgiriya Mişterî
For further assistance, technical support, or warranty inquiries, please contact Earthquake Sound customer service. Visit the official Earthquake Sound webmalper ji bo agahdariyên têkiliyê û çavkaniyên zêdetir.
Webmalper: www.earthquakesound.com
