AMÛRÊN ANALOG EVAL-HMC7044B Nirxandina Lijneya Nirxandina Kêmkirina Jitterê ya 14 Derketinan
TAYBETÎ
- Karta xweser, tevî paqijkera jitterê ya demjimêra dual-loop HMC7044B, fîlterên loop, navrûya USB, VCXO ya li ser kartê, û voltage regulators
- Girêdanên SMA ji bo du têketinên referansê, şeş derketinên demjimêrê, û yek derketinek VCXO
- Nermalava-based Windows® destûrê dide kontrolkirina fonksiyonên sentezkerê ji PC-yê
- Bi hêza derveyî ya 6V ve tê xebitandin
NAVEROK KIT NAVEROK
- Lijneya nirxandinê ya EK1HMC7044BLP10B
PÊWÎŞTÎ KIRIN
- PC-ya Windows-ê bi porta USB-ê ji bo nermalava nirxandinê
► EVAL-SDP-CK1Z (SDP-K1) controller board - Dabînkirina hêzê (6V)
- 50Ω terminators
- Çavkaniya REFIN ya bi dengekî nizm
BELGEYÊN PÊWÎŞTIN
- Pelê daneyê ya HMC7044B
- Rêbernameya bikarhêner a EK1HMC7044BLP10B
SOFTWARE REQUIRED
- Nermalava Analîz | Kontrol | Nirxandin (ACE) (guhertoya 1.30 an nûtir)
- Pêveka HMC7044B (guhertoya 1.2022.47100 an nûtir)
DÎNA GIŞTÎ
- This user guide describes the hardware and software of the HMC7044B evaluation kit. The evaluation board schematic and printed circuit board (PCB) layout artwork can be found on the EK1HMC7044BLP10B product page at www.analog.com.
- HMC7044B pêdiviyên sêwirana stasyona bingehîn a GSM û LTE ya pir-hilgir bicîh tîne, û cûrbecûr taybetmendiyên birêvebirin û belavkirina demjimêrê pêşkêş dike ku sêwirana dara demjimêra bingeha band û karta radyoyê hêsan dike. Navika du-xeleka performansa bilind a HMC7044B dihêle ku sêwiranerê stasyona bingehîn ji lerzîna hatinê ya demjimêrek referansa pergala seretayî, wekî çavkaniyek CPRI, bi karanîna xeleka qonaxa yekem a kilîtkirî (PLL) ya bi bendek teng ve hatî mîheng kirin, ku volumek derveyî disîplîn dike.tagosîlatora krîstal a bi kontrolkirina elektronîkî (VCXO), û ji bo çêkirina dengê qonaxa nizm, demjimêrên frekansa bilind bi PLL-ya duyemîn a band-firehtir ji bo ajotina veguherînerên daneyanamptêketinên demjimêrê.
- The EK1HMC7044BLP10B evaluation board is a compact, easy-to-use platform for evaluating all the features of the HMC7044B. A 122.88MHz VCXO is mounted on the evaluation board to provide a complete solution. All inputs and outputs are configured as differential on the evaluation board. Full specifications on the HMC7044B are available in the product data sheet, which must be consulted in conjunction with this user guide when using the evaluation board.
WÊNEYA LIJNEYA NIRXANDINÊ YA EK1HMC7044BLP10B
Wêne 1. Wêneya Lijneya Nirxandinê ya EK1HMC7044BLP10B
DESTPÊKIRIN
SOFTWARE INSTALLATION PROCEDURES To install the ACE software and HMC7044B plugin, perform the following steps:
- Guhertoya herî dawî ya platforma nermalava ACE saz bikin.
- If the HMC7044B plugin appears automatically, proceed to Step 4.
- Double click the HMC7044B plugin file,
Board.HMC7044_SDP.1.2023.47100.acezip. - Check that the HMC7044B plugin appears when the EK1HMC7044BLP10B board is attached to the PC through the system demonstration platform (SDP) connector.
PÊVAJOYÊN SETUP BODÊ NIRXANDINÊ
The EK1HMC7044BLP10B board uses a single 6V power supply with VCC_IN and AGND banana plugs by default. On-board low-noise, low-dropout (LDO) regulators generate nominal 3.3V and 5V supplies.
Details of the power supply circuitry are given in the Power Sup-plies section.
To power up the board, perform the following steps:
- Set dabînkirina hêzê voltage as 6V and the current limit as 2A.
- Connect power cables to VCC_IN and AGND (two banana cables).
- Hêzê vekin.
Ji bo xebitandina nermalavê, gavên jêrîn bicîh bînin:
- Destpêk> Hemî Bername> Amûrên Analog> ACE hilbijêrin.
- On the Select Device and Connection tab, choose HMC7044B and the HMC7044B board appears under attached hardware.
- When connecting the EK1HMC7044BLP10B board, allow 5 sec to 10 sec for the label on the status bar to change.
HARDWARE Lijneya Nirxandinê
- EK1HMC7044BLP10B platforma SDP-K1-ê ya ku EVAL-SDP-CK1Z bikar tîne hewce dike.
- Nexşeya şematîk û hunerî ya EK1HMC7044BLP10B di Şekil 9 heta Şekil 20 de têne nîşandan.
PÊŞKIRINÊN PÊŞÎ
- Karta EK1HMC7044BLP10B ji hêla dabînkerê hêzê yê 6V ve tê xebitandin ku bi pêveka banana, VCC_IN, û GND bi pêveka banana, AGND ve girêdayî ye.
- Devreya dabînkirina hêzê guhêrkerek bêdeng a gav-jêr a LT8622S/LT8624S 3 heye ku referansa dengê pir nizm heye.
- Yek LT8622S ji bo çêkirina hemî pêdiviyên HMC7044B tê bikar anîn, ji bilî VCC_VCO. Rêkxerê LDO yê LT3045, dengê kêm, li ser panelê, dabînkirinek paqij ji bo VCXO ya 122.88MHz ya li ser panelê û VCO ya navxweyî ya HMC7044B peyda dike.
SAZKIRINA GIRÊDANÊN SÎNYALÊ
Piştî sazkirina girêdanên hêz û PC-yê, ji bo sazkirina girêdanên sînyalê rêbaza jêrîn bikar bînin:
- Connect a signal generator to the CLKIN0_RFSYNC_P SMA Connector J11. By default, the reference inputs on the evaluation board are AC-coupled. Terminate the CLKIN0_RFSYNC_N SMA Connector J10 with a 50Ω termination. An ampMîhengkirina ronahîkirinê ya 6dBm ji jeneratorê sînyalê têr dike.
- Connect an oscilloscope, spectrum analyzer, or other lab equipment to any output of the CLKOUTx_P or CLKOUTx_N SMA connectors. Place a 50Ω termination on all unused differential output pairs.
DERBASBÛNA PÊDIVÎNA 6V Û LT8622S
The evaluation board contains one on-board S, step-down silent switcher 3 with ultra-low noise reference, and two LTC3045 devices, LDO regulators to regulate the 6V to 3.3V supply domain. The evaluation board can be configured to bypass the silent switcher and the LDOs, which is useful for increasing the HMC7044B power consumption efficiency. The evaluation board schematics are provided in the Evaluation Board Schematics and Artwork section. Bypass the 6V silent switcher for the HMC7044B as follows:
- Remove the on-board LT8622S (U2).
- Remove R8 and L1.
- Remove R100 and R101.
- Install R360 and R364.
Çavkaniyek hêzê ya 3.3V ya benchê bi her yek ji pinên dabînkirinê yên li ser sernavê sereke yê 3.3V (TP15) ve girêdin. Bala xwe bidinê ku pir girîng e ku dabînkirina 6V bi TP15 ya panela nirxandinê ve ne girêdayî be.
HARDWARE Lijneya Nirxandinê
Wêne 2. Diyagrama Sazkirina Panela Nirxandinê
SOFTWARE Lijneya Nirxandinê
Nermalava ACE platforma sereke ye ku ji bo kontrolkirina EK1HMC7044BLP10B tê bikar anîn. Pêveka HMC7044 navrûyên bikarhêner ên ku bi HMC7044B ve girêdayî ne û destûrê didin nirxandina cîhazê vedihewîne. Ji bo vekirina pencereya kontrola sereke ya ji bo HMC7044B gavên jêrîn bikar bînin:
- Launch the ACE application. With the SDP-K1 board connected to the EK1HMC7044BLP10B, the attached hardware appears in the graphical user interface (GUI) as shown in Figure 3.
- Double click the HMC7044 Board icon and the tab shown in Figure 4 appears.
- Double click the HMC7044 icon that appears on the board GUI to open the main control window shown in Figure 5.
KONTROLÊN SEREKÎ
The main controls are available in the high-level register map shown in Figure 5. To modify registers, perform the following steps:
- ACE plugin is opened with preconfigured register values for jitter cleaner application. Click Apply Changes to upload suggested register settings for initialization.
- Modify the registers as required.
- Click Apply Changes to load modified settings to the device. This action loads the updated registers only.
- Some of the internal frequencies can be calculated depending on the user input. Therefore, other changes are expected when the user interact with certain fields.
- Restart, Slip, Reseed, Pulsor, and Sleep requests can be triggered by the buttons at the bottom part shown in Figure 5.
- Click Memory Map Side-By-Side and Export to save the specific register configuration. It exports the register values to a CSV file.
SOFTWARE Lijneya Nirxandinê 
SOFTWARE Lijneya Nirxandinê 
Wêne 7. Rûpela Belavkirina Saetê
NIRXANDIN Û TEST
Ji bo nirxandin û ceribandina performansa HMC7044B, gavên jêrîn bişopînin:
- Prepare the hardware and software setup as explained in the Evaluation Board Hardware section and the Evaluation Board Software section.
- Run the software and follow the steps given in the Evaluation Board Software section to open the main page as shown in Figure 5.
- Click Apply Changes, which provides a 10GHz clock at CLKOUT0P/CLKOUT0N output.
- Measure the output spectrum and single sideband phase noise on a spectrum analyzer.
Wêne 8 nexşeya dengê qonaxê ya derana SMA CLKOUT0P nîşan dide ku wekhevî 2703.36MHz e.
Wêne 8 nexşeya dengê qonaxê ya derana SMA CLKOUT0P nîşan dide ku wekhevî 2703.36MHz e. 
Wêne 9. Nexşeya Lijneya Nirxandinê, Fîlterên Loopê, VCXO, CLKOUTx (Rûpel 2)
SCHEMATÎKÊN BOYÊN NIRXANDINÊ Û HUNERÎ 
Wêne 10. Nexşeya Lijneya Nirxandinê, LDO, Belavkirina Hêzê, (Rûpel 3)
Wêne 11. Nexşeya Lijneya Nirxandinê, Guhêrbarê Bêdeng (Rûpel 4)
ORDER INFORMACION
BILLLLA METRELYAN
Table 1. Bill of Materials
| 2 | AGND, VCC_IN | Connector-PCB, banana jack, female, non-insulated, through- | 575-4 | Keystone Electronics | 575-4 |
| qul, xêz, dirêjahiya 0.218 înç | |||||
| 1 | C1 | Kapasîtorê seramîk, 4.7μF, 25V, 10%, X7R, 1206 | 4.7 μF | KEMET | C1206C475K3RACTU |
| 1 | C10 | Ceramic capacitor, 100pF, 50V, 5%, C0G, 0402, extreme low | 100 pF | KEMET | C0402C101J5GACTU |
| equivalent series resistance (ESR) | |||||
| 12 | C23, C107, C109, C111, | Ceramic capacitor, 1μF, 16V, 10%, 0402, low ESR | 1 μF | TDK | C1005X6S1C105K050BC |
| C113, C115, C128, C130, | |||||
| C138, C140, C143, C198 | |||||
| 1 | C11 | Kapasîtorê seramîk, 82pF, 50V, 5%, C0G, 0402 | 82 pF | YAGEO | CC0402JRNPO9BN820 |
| 2 | C12, C18 | Kapasîtorê seramîk, 4700pF, 50V, 10%, X7R, 0402 | 4700 pF | KEMET | C0402C472K5RACTU |
| 4 | C125, C126, C196, C202 | Ceramic capacitor, 4.7μF, 16V, 10%, X5R, 0603, low ESR | 4.7 μF | TDK | C1608X5R1C475K080AC |
| 54 | C2, C3, C5, C6, C8, C26, | Kapasîtorê seramîk, 0.1μF, 16V, 10%, X7R, 0402 | 0.1 μF | KEMET | C0402C104K4RACTU |
| C28, C29, C35, C36, | |||||
| C40, C41, C56, C57, | |||||
| C59, C60, C62, C63, | |||||
| C65, C66, C71, C72, | |||||
| C74, C75, C77, C78, | |||||
| C80, C81, C83, C84, | |||||
| C86, C87, C127, C134, | |||||
| C135, C139, C141, C145, | |||||
| C147, C148, C150, C151, | |||||
| C152, C153, C160, C161, | |||||
| C164, C165, C168, C169, | |||||
| C170, C200, C203, C204 | |||||
| 2 | C129, C199 | Ceramic capacitor, 10μF, 16V, 10%, X5R, 0805, extreme low | 10 μF | Johanson Dielectrics | 160R15X106KV4E |
| ESR | |||||
| 1 | C13 | Kapasîtorê seramîk, 1μF, 16V, 10%, X7R, 0603 | 1 μF | AVX | 0603YC105KAT2A |
| 5 | C20, C21, C22, C24, | Kapasîtorê seramîk, 4.7μF, 6.3V, 20%, X5R, 0402 | 4.7 μF | Murata | GRM155R60J475ME87D |
| C132 | |||||
| 9 | C137, C142, C144, C146, | Ceramic capacitor, 1000pF, 50V, 10%, X7R, 0402, AEC-Q200, | 1000 pF | TDK | CGA2B2X7R1H102K050B |
| C149, C155, C156, C157, | low ESR | A | |||
| C158 | |||||
| 1 | C16 | Kapasîtorê seramîk, 1nF, 100V, 10%, X7R, 0603 | 1nF | AVX Corporation | 06031C102KAT2A |
| 1 | C17 | Kapasîtorê seramîk, 160pF, 50V, 5%, C0G, 0402 | 160 pF | YAGEO | CC0402JRNPO9BN161 |
| 1 | C25 | Kapasîtorê seramîk, 1μF, 25V, 10%, X8R, 0805 | 1 μF | TDK | C2012X8R1E105K125AC |
| 2 | C251, C252 | Kapasîtorê seramîk, 0.1μF, 25V, 10%, X8R, 0603 | 0.1 μF | TDK | C1608X8R1E104K080AA |
| 2 | C27, C30 | Ceramic capacitor, 100μF, 10V, 20%, X5R, 1206, low ESR | 100 μF | TDK | C3216X5R1A107M160AC |
| 1 | C33 | Ceramic capacitor, 0.1μF, 16V, 10%, X7R, 0402, AEC-Q200 | 0.1 μF | Murata | GCM155R71C104KA55D |
| 1 | C4 | Kapasîtorê seramîk, 1μF, 6.3V, 10%, X7R, 0603 | 1 μF | KEMET | C0603X105K9RACTU |
| 1 | C7 | Kapasîtorê seramîk, 10μF, 6.3V, 20%, X5R, 0402 | 10 μF | Samsung | CL05A106MQ5NUNC |
| 1 | C9 | Kapasîtorê seramîk, 2.2nF, 50V, 5%, X7R, 0402 | 2.2nF | AVX Corporation | 04025C222JAT2A |
| 4 | D1, D2, D3, D4 | Dîod LED-a herikîna nizm a pir geş, kesk | LG L29K- | OSRAM Opto | LG L29K-G2J1-24-Z |
| G2J1-24-Z | Semiconductors | ||||
| 12 | E55, E56, FB1, FB11, | Inductor chip ferrite bead, 0.3Ω maximum, DC resistance, 0.5A | 120Ω at | Würth Elektronik | 74279262 |
| FB13, FB14, FB15, FB16, | 100 MHz | ||||
| FB17, FB18, FB20, FB21 | |||||
| 18 | J8, J9, J10, J11, J14, | Connector-PCB, jack assembly, end launch, SMA, 62 milsboard | 142-0701- | Têkiliya Cinch | 142-0701-851 |
| J15, J22, J23, J24, J25, | thick, for 30 and 10 mils board thick, use ALT symbols | 851 | Solutions | ||
| J26, J27, J28, J29, J36, | |||||
| J37, J38, J39 | |||||
| 1 | L1 | Inductor shielded power, 0.01397Ω, DC resistance, 10A | 2.2 μH | Coilcraft, Inc. | XEL6030-222MEC |
| 2 | P1, P22 | Connector, 3 position male unshrouded, single row, straight tip, | TSW-103- | Samtec | TSW-103-08-TS |
| 2.54mm pitch, 5.84mm post height, 5.08mm solder tail | 08-T-S | ||||
| 1 | P2 | Girêder-PCB, priz, stûna çargoşe ya 25mil, pitch 2.54mm | SSQ-106-0 | Samtec | SSQ-106-03-GS |
| 3-G-S | |||||
| 2 | P3, P6 | Girêder-PCB, priz, stûna çargoşe ya 25mil, pitch 2.54mm | SSQ-108-0 | Samtec | SSQ-108-03-GS |
| 3-G-S | |||||
| 1 | P4 | Connector-PCB, receptacle, 25mils square post, dual row, | SSQ-103-0 | Samtec | SSQ-103-03-GD |
| 2.54mm pitch | 3-G-D | ||||
| 1 | P5 | Girêder-PCB, priz, stûna çargoşe ya 25mil, pitch 2.54mm | SSQ-110-0 | Samtec | SSQ-110-03-GS |
| 3-G-S | |||||
| 48 | R8, R10, R17, R19, R41, | Resistor surface-mount device (SMD), 0Ω, jumper, 1/10W, | 0Ω | Panasonic | ERJ-2GE0R00X |
| R42, R46, R47, R51, | 0402, AEC-Q200 | ||||
| R52, R132, R227, R228, | |||||
| R229, R230, R233, R234, | |||||
| R235, R236, R237, R256, | |||||
| R266, R269, R274, R276, | |||||
| R282, R289, R290, R294, | |||||
| R295, R298, R299, R304, | |||||
| R305, R306, R307, R308, | |||||
| R309, R310, R311, R329, | |||||
| R330, R331, R342, R343, | |||||
| R344, R345, R365 | |||||
| 22 | R4, R5, R33, R34, R39, | Resistor SMD, 49.9Ω, 1%, 1/10W, 0402, AEC-Q200 | 49.9Ω | Panasonic | ERJ-2RKF49R9X |
| R40, R68, R69, R73, | |||||
| R74, R98, R99, R103, | |||||
| R104, R108, R109, R123, | |||||
| R124, R220, R221, R231, | |||||
| R232 | |||||
| 1 | R12 | Resistor SMD, 280kΩ, 1%, 1/16W, 0402, AEC-Q200 | 280kΩ | Vişay | CRCW0402280KFKED |
| 3 | R6, R129, R353 | Resistor SMD, 33.2kΩ, 1%, 1/16W, 0402, AEC-Q200 | 33.2kΩ | Vişay | CRCW040233K2FKED |
| 12 | R134, R137, R139, R142, | Resistor SMD, 150Ω, 1%, 1/10W, 0402, AEC-Q200 | 150Ω | Panasonic | ERJ-2RKF1500X |
| R159, R160, R180, R181, | |||||
| R185, R186, R200, R201 | |||||
| 1 | R18 | Resistor SMD, 1.62kΩ, 1%, 1/10W, 0402, AEC-Q200 | 1.62kΩ | Panasonic | ERJ-2RKF1621X |
| 1 | R2 | Resistor SMD, 2.7kΩ, 5%, 1/10W, 0402, AEC-Q200 | 2.7kΩ | Panasonic | ERJ-2GEJ272X |
| 2 | R21, R22 | Resistor SMD, 100Ω, 5%, 1/10W, 0402, AEC-Q200 | 100Ω | Panasonic | ERJ-2GEJ101X |
| 9 | R238, R239, R240, R242, | Resistor SMD, 0Ω, jumper, 2010, AEC-Q200 | 0Ω | Vişay | CRCW20100000Z0EF |
| R244, R245, R246, R247, | |||||
| R352 | |||||
| 2 | R25, R29 | Resistor SMD, 1.5kΩ, 1%, 1/10W, 0402, AEC-Q200 | 1.5kΩ | Panasonic | ERJ-2RKF1501X |
| 7 | R27, R319, R320, R322, | Resistor SMD, 27kΩ, 5%, 1/10W, 0402, AEC-Q200 | 27kΩ | Panasonic | ERJ-2GEJ273X |
| R324, R334, R341 | |||||
| 1 | R28 | Resistor SMD, 100kΩ, 1%, 1/5W, 0402, AEC-Q200, anti-surge | 100kΩ | Panasonic | ERJ-PA2F1003X |
| 1 | R3 | Resistor SMD, 47kΩ, 1%, 1/10W, 0402, AEC-Q200 | 47kΩ | Panasonic | ERJ-2RKF4702X |
| 1 | R30 | Resistor SMD, 49.9kΩ, 1%, 1/10W, 0402, AEC-Q200 | 49.9kΩ | Panasonic | ERJ-2RKF4992X |
| 1 | R31 | Resistor SMD, 430Ω, 5%, 1/10W, 0402, AEC-Q200 | 430Ω | Panasonic | ERJ-2GEJ431X |
| 2 | R337, R355 | Resistor SMD, 0Ω, jumper, 1/8W, 0402, AEC-Q200 | 0Ω | Vişay | RCC04020000Z0ED |
| 8 | R356, R357, R358, R359, | Resistor SMD, 0Ω jumper 1/3W 0603 AEC-Q200 | 0Ω | Vişay | CRCW06030000Z0EAHP |
| R360, R364, R401, R402 | |||||
| 3 | R36, R37, R48 | Resistor SMD, 100kΩ, 1%, 1/10W, 0603, AEC-Q200 | 100kΩ | Vişay | CRCW0603100KFKEA |
| 16 | R53, R55, R57, R403, | Resistor SMD, 0Ω, jumper, 1/10W, 0603, AEC-Q200 | 0Ω | Panasonic | ERJ-3GEY0R00V |
| R404, R405, R406, R410, |
| R411, R412, R417, R418, | |||||
| R420, R423, R425, R427 | |||||
| 1 | R407 | Resistor SMD, 10kΩ, 1%, 1/10W, 0603, AEC-Q200 | 10kΩ | Panasonic | ERJ-3EKF1002V |
| 1 | R7 | Resistor SMD, 100kΩ, 1%, 1/10W, 0402, AEC-Q200 | 100kΩ | Panasonic | ERJ-2RKF1003X |
| 1 | R9 | Resistor SMD, 11kΩ, 1%, 1/16W, 0402, AEC-Q200 | 11kΩ | Vişay | CRCW040211K0FKED |
| 5 | TP1, TP12, TP13, TP29, | Connector-PCB, test point, red | Sor | Keystone Electronics | 5005 |
| TP38 | |||||
| 10 | TP2, TP3, TP4, TP5, | Connector-PCB, test point, yellow | Zer | Components | TP-104-01-04 |
| TP7, TP8, TP9, TP10, | Dayre | ||||
| TP14, TP15 | |||||
| 5 | TP17, TP19, TP30, TP31, | Connector-PCB, test point, black | Reş | Keystone Electronics | 5006 |
| TP34 | |||||
| 1 | U1 | Ji kerema xwe parçeya di HMC7044B de bikar bînin | HMC7044 | Amûrên Analog, Inc. | HMC7044BLP10BE |
| BLP10BE | |||||
| 1 | U1000 | IC-Analog Devices, 20V, 200mA, ultra‐low noise, ultra‐high | LT3042ED | Amûrên Analog | LT3042EDD#PBF |
| power supply rejection ratio (PSRR), radio frequency, linear | D#PBF | ||||
| regulator | |||||
| 1 | U2 | IC-Analog Devices, 18V, 2A, step-down silent switcher 3 with | LT8622SA | Amûrên Analog | LT8622SAV#PBF |
| ultra-low noise reference, prelim | V#PBF | ||||
| 1 | U3 | IC, wergêra sînyala 4-bit a dabînkirina dualî | FXL4TD24 | Fairchild | FXL4TD245BQX |
| 5BQX | Semiconductor | ||||
| 1 | U4 | IC-linear, 20V, 500mA, ultra‐low noise, ultra‐high PSRR, linear | LT3045ED | Amûrên Analog | LT3045EDD#PBF |
| regulator | D#PBF | ||||
| 1 | U5 | IC, 32kb, serial electrically erasable programmable read-only | 24AA32A- | Teknolojiya Microchip | 24AA32A-I/SN |
| bîr | I/SN | ||||
| 1 | Y1 | IC, VCXO, osîlatora dengê qonaxa pir nizm | 122.88MH | Crystek Corporation | CVHD-950-122.880 |
| z |
©2025 Analog Devices, Inc. Hemû maf parastî ne. Nîşaneyên bazirganî û tîcarî yên qeydkirî milkê xwediyên wan ên têkildar in. Yek Analog Way, Wilmington, MA 01887-2356, USA
FAQ
What is the power supply requirement for the evaluation board?
The evaluation board is externally powered by a 6V power supply.
Belge / Çavkanî
 |
AMÛRÊN ANALOG EVAL-HMC7044B Nirxandina Lijneya Nirxandina Kêmkirina Jitterê ya 14 Derketinan [pdf] Rehbera bikaranînê EVAL-HMC7044B, EVAL-HMC7044B Nirxandina Lijneya Nirxandina Kêmkirina Jitterê ya 14 Derketinan, Nirxandina Lijneya Nirxandina Kêmkirina Jitterê ya 14 Derketinan, Lijneya Nirxandina Kêmkirina Jitterê, Lijneya Nirxandina Kêmkirinê, Lijneya Nirxandinê |