1. Destpêk
The Komshine KPV-53 is a versatile 2-in-1 device integrating an Optical Power Meter (OPM) and a Visual Fault Locator (VFL). It is designed for efficient and accurate testing of fiber optic networks, allowing measurement of optical power and detection of fiber disconnections. This manual provides detailed instructions for the proper setup, operation, and maintenance of your KPV-53 device.
2. Taybetmendiyên sereke
- Fonksiyona 2-di-1: Integrates Optical Power Meter (OPM) and Visual Fault Locator (VFL).
- Wavelength Support: Measures optical power across 7 calibrated wavelengths: 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, and 1625nm.
- Navbera gerdûnî: Equipped with a 2.5mm universal interface, compatible with SC, FC, ST, and LC connectors (with optional adapters).
- Built-in VFL: Features a 10mW Visual Fault Locator for quick and convenient detection of fiber disconnections.
- Sêwirana Durable: Includes a dust-resistant rubber cap, robust rubber armor, and an anti-wrestling silicone jacket for enhanced protection against drops and dust.
- Ronahiya paşde ya LED: Ensures clear display readability in various lighting conditions.
- Operasyona Dost-Bikarhêner: Simple one-key start and automatic shutdown function to conserve battery life.
- Jiyana Battery Berfireh: Provides approximately 50 hours of operation in continuous mode.
- Sêwirana Ergonomîk: Features a scaffold design for comfortable and convenient handling during use.
3. Naveroka pakêtê
Ji kerema xwe pakêtê bi baldarî kontrol bikin da ku hûn piştrast bibin ku hemî tişt li wir in û zirar nedîtine:
- Komshine KPV-53 Fiber Optic Power Meter & VFL
- Rêberê Zû
- Karta Garantî
- (Batteries are typically not included and must be purchased separately)
4. Specifications
| Parametre | Yekbûn | Mîna | Not |
|---|---|---|---|
| Metreya Hêza Optîkî (OPM) | |||
| Dirêjahiya pêlê ya kalibrasyonê | nm | 850/980/1300/1310/1490/1550/1625 | |
| Type Detector | InGaAs | ||
| Rastbûna kalibrasyonê | dB | ±0.02 | @ -3dBm |
| Rêzeya hêzê | dBm | −70~+6 / −50~+26 | |
| Yekîneya nîşan bide | dB, dBm, uW | ||
| Optical adaptor type | 2.5mm universal + SC | ||
| Ebat | mm | 88.5(W)x57(H)x19.5(D) | |
| Depokirina daneyan | Netû | ||
| Veguheztina daneyan | Netû | ||
| Otomotîk | Min | 5 | |
| Dîtina Xeletiya Dîtbar (VFL) | |||
| Dirêjahiya pêlê ya navendî | nm | 650 | Class 3b laser |
| Lihevhatina fiber | Single & Multi mode fiber | ||
| Hêza derketinê | mW | 10 | |
| Detection Distance | KM | 10 ber | |
| Optical adaptor type | For SC,FC,ST | ||
| Elektrîk & Jîngeh | |||
| Erk | V | Alkaline Battery (3AA 1.5V batteries) | |
| jiyana pîlê | hrs | 50 (Tîp.) | Typical in continuous mode |
| Pêşkêşî | LCD with back lights | ||
| Germahiya xebitandinê | °C | 20-75 | |
| Germahiya hilanînê | °C | −40~85 | |
| Humidity nisbî | 95% RH from 0~40°C | Not | |
5. Rêwerzên Sazkirinê
5.1. Sazkirina Pîl
- Locate the battery compartment on the back of the KPV-53 device.
- Berga beşa pîlê vekin.
- Insert three (3) AAA 1.5V alkaline batteries, ensuring correct polarity.
- Qapaxa beşa pîlê bi ewlehî bigire.
5.2. Connecting Fiber Optic Cables
The KPV-53 features a 2.5mm universal interface for the Optical Power Meter and a dedicated port for the Visual Fault Locator. Ensure to use the correct adapter for your fiber type.
- Remove the dust cap from the desired port (OPM or VFL).
- Clean the fiber optic connector end-face thoroughly using appropriate fiber cleaning tools.
- Insert the cleaned fiber optic connector into the device port. For OPM, the standard connector is SC UPC, but adapters for FC, ST, and LC are available (optional).
- Têkiliyek ewle ewle bikin.
6. Telîmatên Operating
6.1. Power On / Off
- Ji bo vêxistina cîhazê, pêl bikin û bigirin Erk bişkojka (
) heta ku dîmen ronî bibe. - Ji bo qewitandinê, pêlê bigire û bigire Erk button again. The device also features an automatic shutdown function after 5 minutes of inactivity.
6.2. Optical Power Meter (OPM) Function
- Connect the fiber optic cable to the OPM port as described in Section 5.2.
- Bitikîne Dirêjahiya pêlê (λ) button to cycle through the available calibrated wavelengths (850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm) until the desired wavelength is displayed.
- The current optical power measurement will be shown on the LCD in dBm, dB, or uW.
- Setting Reference (REF) and Unit (dB/dBm): Bitikîne REF/dB button to switch between absolute (dBm) and relative (dB) measurements. To set a reference value for relative measurements, press and hold the REF/dB pişkov.
- Calibration: For calibration, connect the KPV-53 to a light source of the same wavelength. Simultaneously press the REF/dB û VFL keys to enter the adjustment interface. Use the Dirêjahiya pêlê (λ) key for downward adjustment and the REF/dB key for upward adjustment. Once the desired calibration is achieved, press the VFL key to save the parameters.
6.3. Visual Fault Locator (VFL) Function
- Connect the fiber optic cable to the VFL port as described in Section 5.2.
- Bitikîne VFL button to activate the red laser.
- Observe the fiber for any light leakage, which indicates a break or fault. The VFL operates in both Continuous Wave (CW) and Modulation modes.
- Bitikîne VFL button again to turn off the laser.
6.4. Xwenîşandana Vîdyoyî
7. Maintenance
7.1. Paqijkirin
- Always clean fiber optic connector end-faces before connecting them to the KPV-53 to prevent contamination and ensure accurate measurements. Use lint-free wipes and fiber optic cleaning solutions.
- Keep the device's optical ports covered with dust caps when not in use to prevent dust and debris from entering.
- Derveyê cîhazê bi qumaşek nerm û hişk paqij bikin. Paqijker an çareserkerên aşınker bikar neynin.
7.2. Storage
- When not in use, store the KPV-53 in its protective packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ger ji bo demek dirêj tê hilanîn, ji bo rêgirtina li rijandinê pîlan derxînin.
8. Destpêkirin
- Amûrê vêna nabe:
- Kontrol bike ka pîl bi rêkûpêk hatine sazkirin û şarjê wan têra xwe ye. Ger pêwîst be pîlan biguherîne.
- Inaccurate OPM readings:
- Ensure the fiber optic connectors are clean. Verify that the correct wavelength is selected on the OPM. If readings are consistently off, consider recalibrating the device as per Section 6.2.
- VFL laser is not visible:
- Confirm that the fiber optic cable is properly connected to the VFL port. Ensure the VFL function is activated by pressing the VFL button. Check for any obstructions in the VFL output port.
9. Bikarhêner Tips
- Always clean fiber optic connectors before use to ensure accurate measurements and prevent damage to the device's optical ports.
- Utilize the appropriate fiber adapter for your specific connector type (SC, FC, ST, LC) to ensure a proper and secure connection.
- Regularly check the battery levels, especially before critical testing, to avoid interruptions during operation.
- When using the VFL, be mindful of the Class 3b laser and avoid direct eye exposure.
10. Garantî û Piştgirî
The Komshine KPV-53 comes with a 3-year warranty, providing assurance for your investment. For technical support, service inquiries, or to claim warranty, please refer to the contact information provided with your purchase or visit the official Komshine webmalpera ji bo alîkariyê.
