CRAFTSMAN Select 24" Two-Stage Snow Blower (Model 31AS6K1EB93) Instruction Manual

1. Destpêk

This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your CRAFTSMAN Select 24" Two-Stage Snow Blower, Model 31AS6K1EB93. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The CRAFTSMAN Select 24 is equipped with a 208cc 4-cycle OHV engine and features a 24-inch clearing width and 20-inch intake height. It includes a push-button electric start, self-propelled drive with 6 forward and 2 reverse speeds, and 12-inch sawtooth steel augers for effective snow and ice removal. The 200-degree chute rotation allows for controlled snow discharge up to 40 feet.

Figure 1: CRAFTSMAN Select 24" Two-Stage Snow Blower, Model 31AS6K1EB93. This image shows the complete snow blower from a front-side angle, highlighting its red body, black engine, and large wheels.

2. Agahiyên Ewlekariyê

WARNING: Read and understand all safety warnings and instructions before operating this snow blower. Failure to follow these instructions may result in serious injury or death.

Potential hazards associated with snow blowers include rotating parts, carbon monoxide poisoning from gasoline models, and the need for appropriate personal protective equipment (PPE) such as gloves and eye protection. Always adhere to manufacturer guidelines for handling, operation, and storage.

Rêbazên Ewlekariya Giştî:

• Always wear appropriate eye and hearing protection.
• Dest, ling û cil û berg ji parçeyên livîn dûr bigirin.
• Never operate the snow blower indoors or in poorly ventilated areas due to carbon monoxide risk.
• Ensure the area to be cleared is free of obstacles before starting.
• Destûr nedin zarok an kesên neperwerdeyî ku makîneyê bixebitînin.
• Turn off the engine and disconnect the spark plug wire before performing any maintenance or clearing clogs.
• Li cîhekî baş hewakirî, motorê vemirandî û sar, sotemeniyê tijî bikin.

3. Setup û Meclîsa

Your snow blower may require some assembly upon arrival. Refer to the separate assembly guide for detailed instructions. Key steps typically include:

1. Meclîsa Handlebar: Attach the upper handlebar to the lower handlebar using the provided hardware. Ensure all cables and wires are routed correctly and not pinched.
2. Meclîsa Şûtê: Secure the discharge chute and its rotation mechanism. Verify smooth operation of the chute control lever.
3. Skid Shoes Adjustment: Adjust the poly skid shoes to the desired height. For most conditions, set them slightly below the auger housing to prevent scraping the surface.
4. Kontrolên Şilavê:
   • Rûnê motorê: Check the engine oil level and fill with recommended oil (refer to engine manual for type and capacity).
   • Malê şewatê: Fill the fuel tank with fresh, unleaded gasoline. Do not mix oil with gasoline.

Figure 2: Product dimensions of the CRAFTSMAN Select 24" Snow Blower. This image illustrates the overall length (44.75"), width (26.75"), and height (32.8") of the unit, useful for planning storage and transport.

4. Telîmatên Operating

4.1. Pre-Operation Checklist

• Piştrast bike ku hemû gwîz, bolt û pêç hişk in.
• Asta rûn û sotemeniyê ya motorê kontrol bikin.
• Inspect the area for debris that could be thrown by the auger.
• Verify that the discharge chute is clear and properly aimed.

4.2. Destpêkirina Engine

The CRAFTSMAN Select 24 features a push-button electric start, eliminating the need for manual pull-starting.

1. Hêza girêdanê: Plug an extension cord into the electric start receptacle on the engine.
2. Prime Engine: Press the primer bulb 3-5 times (more if temperature is below 0°F).
3. Çok danîn: Leva xokê veguhezînin pozîsyona "FULL CHOKE".
4. Destpêkirin: Press and hold the electric start button until the engine starts (maximum 5 seconds).
5. Hêzê qut bikin: Once the engine starts, release the button and unplug the extension cord.
6. Çokê sererast bike: Gradually move the choke lever to the "RUN" position as the engine warms up.

Figure 3: Detail of the push-button electric start mechanism. This image shows the electric start receptacle and the red push-button, simplifying engine ignition in cold weather.

Figure 4: Close-up of the fuel cap and primer bulb. This image highlights the components used for fueling and priming the engine before starting.

4.3. Karkirina Snow Blower

The snow blower features a self-propelled drive system with multiple speeds and adjustable chute control.

• Engage Drive: Squeeze the drive control lever to engage the self-propelled wheels.
• Leza Hilbijêre: Use the speed selector lever to choose from 6 forward and 2 reverse speeds. Adjust speed based on snow depth and density.
• Engage Auger: Squeeze the auger control lever to activate the augers and impeller.
• Adjust Chute: Use the chute control crank to rotate the discharge chute up to 200 degrees, directing snow away from cleared areas. The durable steel chute can throw snow up to 40 feet.

Figure 5: Detail of the chute control mechanism. This image shows the crank used to adjust the direction of snow discharge, offering up to 200 degrees of rotation.

Figure 6: The 12-inch sawtooth auger actively clearing snow. This image demonstrates the snow blower's capability to cut through and clear heavy snow and ice.

Figure 7: A person operating the CRAFTSMAN Select 24" Snow Blower to clear a driveway. This image shows the snow blower in action, demonstrating its ease of use and effective snow removal.

4.4. Rawestandina Engine

To stop the engine, release both the drive control lever and the auger control lever. Then, move the engine switch to the "OFF" position.

5. Maintenance

Regular maintenance ensures optimal performance and extends the life of your snow blower.

5.1. Piştî Her Bikaranînê

• Clear any snow or ice from the auger housing and discharge chute.
• Wipe down the exterior of the machine.
• Ji bo fasteners bêbandor kontrol bikin.

5.2. Seasonal Maintenance

• Guhertina rûnê motorê: Piştî 5 saetên pêşîn ên xebatê, dû re her 25 saetan carekê an jî salane rûnê motorê biguherînin.
• Çirûsk: Salek sal bujiyê kontrol bikin û paqij bikin an jî biguherînin.
• Sîstema sotemeniyê: At the end of the season, drain the fuel tank or use a fuel stabilizer to prevent fuel degradation. Run the engine until it runs out of fuel if not using a stabilizer.
• Rûnkirin: Lubricate all moving parts as indicated in the full owner's manual.
• Skid Shoes and Scraper Bar: Ji bo xitimandinê kontrol bikin û heke pêwîst be biguherînin.

5.3. Storage

When storing the snow blower for extended periods:

• Makîneyê bi tevayî paqij bikin.
• Perform all seasonal maintenance.
• Store in a dry, protected area, away from direct sunlight and extreme temperatures.
• Ensure the fuel tank is either empty or filled with stabilized fuel.

6. Destpêkirin

Ev beş pirsgirêkên hevpar ên ku dibe ku hûn rastî wan werin çareser dike. Ji bo pirsgirêkên tevlihevtir, bi teknîsyenek karûbarê pispor re şêwir bikin.

7. Specifications

8. Garantî û Piştgirî

The CRAFTSMAN Select 24" Two-Stage Snow Blower (Model 31AS6K1EB93) comes with a ermanî bi sînor sê-salî. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official CRAFTSMAN website.

For technical assistance, parts, or warranty claims, please contact CRAFTSMAN customer support. Contact information can typically be found on the CRAFTSMAN webli cîhê an jî di materyalên pakkirinê de.

Çêker: Berhemên MTD