Flyrivergo 6-inch Flat Lapidary Machine (Model WYS-15-1) User Manual

1. Destpêk

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Flyrivergo 6-inch Flat Lapidary Machine. Designed for grinding, shaping, smoothing, and polishing various materials such as stones, minerals, synthetic gems, enamels, and metals, this machine is suitable for creating cabochons and intricate faceted designs. Please read this manual thoroughly before initial use and retain it for future reference.

2. Telîmatên Ewlekariyê

Always prioritize safety when operating any machinery. Failure to follow these instructions may result in injury or damage to the equipment.

• Manual bixwînin: Berî karanînê hemû prosedurên xebitandinê û hişyariyên ewlehiyê fêm bikin.
• Amûrên Parastina Kesane (PPE): Always wear appropriate eye protection (safety glasses or goggles) and gloves. Consider a dust mask if working with materials that produce fine airborne particles.
• Qada Kar: Operate the machine in a well-ventilated area. Ensure the work surface is stable, level, and capable of handling water and potential splashes. Keep the area clean and free of clutter.
• Ewlehiya Elektrîkê: Ensure the power supply matches the machine's requirements (110-120V AC/60Hz). Do not operate with wet hands or in excessively wet conditions. Never use damaged power cords.
• Sarkirina avê: Always use the water cooling system during operation to prevent overheating of the material and the grinding disc. Ensure proper water flow and drainage.
• Parçeyên zivirî: Keep hands, hair, loose clothing, and jewelry away from the rotating grinding disc. Never attempt to stop the disc with your hand.
• Birêvebirina Materyalan: Apply gentle, consistent pressure when grinding. Avoid excessive force, which can damage the material or the machine.
• Dema ku nayê bikar anîn vekin: Disconnect the machine from the power source before performing any adjustments, maintenance, or when not in use.
• Zarok û Pîvan: Keep children and pets away from the machine during operation and storage.

3. Naveroka pakêtê

Piştrast bike ku hemû tiştên ku li jêr hatine rêzkirin di pakêta te de ne. Ger tiştek wenda be an jî zirar dîtibe, ji kerema xwe bi piştgiriya xerîdar re têkilî daynin.

• Flyrivergo 6-inch Flat Lapidary Machine Unit
• Set Pumpa Avê
• Grinding Discs (various grits: 180#, 320#, 600#, 1200#)
• Wooden Rod (for dop sticks)
• Water Pipe Set (including adjustable multi-angle nozzle)
• Grinding Table
• Cord Power
• Hex Hex
• Badanvekir

4. Hilbera Serîview

Familiarize yourself with the main components and controls of your lapidary machine.

• Hêza motorê: 1/4 HP (Approx. 186W) asynchronous induction motor for quiet operation and long lifespan.
• Rêjeya Lezê: Up to 2800 RPM, with variable speed control.
• Rûyê Kar: Brushed stainless steel for durability and precision.
• Rated Voltage/Frekans: 110-120V AC/60Hz.

• Panela Kontrolê: Features independent run/stop button, forward/reverse rotation switch, and speed control knob.
• Shaft Center Safety Design: Edge drainage port for fast water removal; hollow shaft design prevents friction with plastic parts during rotation.
• Parastina Splash: Effectively blocks water and debris splatter.
• Balîfên Pêyan ên Lastîkî: Non-slip and anti-vibration design with a 22-lb (10 kg) weighted body ensures stable, wobble-free operation.

5. Sazkirin

Follow these steps to set up your lapidary machine before first use.

5.1 Grinding Disc Installation

1. Remove the nut and washer from the central shaft.
2. Place the desired grinding disc flat and steady onto the grinding table.
3. Put the washer and nut back onto the shaft sequentially, then tighten securely using the provided wrench.

5.2 Water Cooling and Drainage Setup

1. Connect the water pump to a suitable water reservoir (not included).
2. Attach the water pipe set, including the adjustable multi-angle nozzle, to the water pump and position it to direct water onto the center of the grinding disc.
3. Locate the drain hose extending from the left side of the unit. Fully extend this hose to ensure water can flow freely through it. The hose should reach a length approximately equal to that of your forearm.
4. Ensure the drain hose is positioned to direct wastewater into a suitable container or drain.

Not: Once the drain hose is fully extended, water should flow through it freely, preventing the pan from filling up. When not in use, retract the hose back into the main unit to maintain a clean and organized workspace.

5.3 Girêdana Hêzê

• Connect the power cord to the machine and then to a grounded 110-120V AC/60Hz electrical outlet.

5.4 Rêbernameya Vîdyoyê ya Sazkirinê

For a visual guide on setting up your machine, please watch the official setup video:

6. Operasyon

This section details how to operate your lapidary machine for grinding and polishing.

6.1 Gavên Xebatê yên Bingehîn

1. Hêzdarkirin: Flip the main power switch to the ON position. The power indicator light will illuminate.
2. Destpêkirina Motorê: Bitikîne REV bişkojka li ser panela kontrolê.
3. Lezê eyar bikin: Turn the speed control knob to achieve the desired RPM. Start with a lower speed and gradually increase as needed.
4. Rêza Zivirandinê Hilbijêre: Bi kar tînin FWD/REV switch to select the rotation direction (forward or reverse) as required for your task.
5. Apply Water: Ensure the water pump is active and the adjustable nozzle is directing a steady stream of water onto the grinding disc.
6. Grinding/Polishing: Gently place the material onto the rotating disc, applying light, consistent pressure. Move the material across the disc surface to ensure even grinding.
7. Motora Rawestandinê: Bitikîne RAWESTAN button to halt the disc rotation.
8. Hêzdarkirin: Flip the main power switch to the OFF position when finished.

6.2 Using Different Grits

The machine comes with multiple diamond grinding discs for progressive material removal and finishing.

• 180# Disc (Coarse): For aggressive material removal and initial shaping. Produces rough texture with clearly visible scratch patterns.
• 320# Disc (Medium-Coarse): For refining shape and removing coarser scratches. Results in a semi-rough, fine sandpaper-like finish.
• 600# Disc (Fine): For smoothing the surface and preparing for polishing. Leaves a smooth but slightly hazy finish, similar to frosted glass.
• 1200# Disc (Very Fine): For pre-polishing and achieving a near-mirror effect with no detectable graininess.

6.3 Faceting with Wooden Dop Sticks

The included wooden rod can be used to create dop sticks for precision facet cutting. Secure your gemstone to the dop stick and use it to hold and manipulate the stone against the grinding disc for controlled faceting.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your lapidary machine.

• Paqijî: After each use, clean the grinding table and splash guard to remove accumulated slurry and debris. Use a soft cloth and water. Ensure the machine is unplugged before cleaning.
• Pergala drainage: Periodically check the drain hose for blockages and ensure it is clear for proper water flow.
• Lênêrîna Dîskê: Store grinding discs properly to prevent damage. Replace worn-out or damaged discs promptly to maintain grinding efficiency and safety.
• Motor: The asynchronous induction motor is designed for long life and requires minimal maintenance. Keep the motor housing clean and free of dust.
• Embarkirinî: Dema ku makîneyê nayê bikaranîn, li hawîrdorek hişk û paqij hilînin.

8. Destpêkirin

Ji bo pirsgirêkên hevpar û çareseriyên wan li vê beşê binêre.

9. Specifications

Technical specifications for the Flyrivergo 6-inch Flat Lapidary Machine.

10. Garantî û Piştgirî

Your Flyrivergo 6-inch Flat Lapidary Machine (Model WYS-15-1) comes with a Garantiya çêker a 1 salî ji roja kirînê ve, ku kêmasiyên di materyal û karîgeriyê de di bin karanîna normal de vedihewîne.

For warranty claims, technical assistance, or any questions regarding your product, please contact Flyrivergo customer support through the retailer where you purchased the item or visit the official Flyrivergo store page for contact information.

Piştgiriya Serhêl: Visit the Flyrivergo Store on Amazon