RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. Destpêk

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. Sazkirin

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

2.1 Vekirina Pakêtê û Kontrola Destpêkê

• Bi baldarî hemî pêkhatan ji pakêtê derxînin.
• Piştrast bike ku hemî tiştên ku di navnîşa pakkirinê de hatine navnîş kirin hene.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

2.2 Girêdana Kontrolker

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• Hêza li ser Ethernet (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• Adaptera Hêza Derve: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• Têkiliyên Kamera:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • Kontrola Serial: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

Wêne 2.2: Berêample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 Veavakirina Torê

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Access the controller's web navbeynkar bi têketina navnîşana IP-ya wê di nav a web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• Di nav web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. Operasyon

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 Serview ya Kontrolan

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

Wêne 3.2: Bi hûrgilî view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 Hilbijartina Kamera

• Quick Select Buttons: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• Klavyeya hejmarî: For cameras beyond the quick select buttons (up to 255), press the ID CAM button, then enter the camera number using the numeric keypad, and press DERBASBÛN.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 Kontrola PTZ

• Joysticks: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• Bişkojka Leza PT: Adjusts the gimbal movement speed for pan and tilt.
• Zoom Knob: Provides precise zoom control, especially useful in preview awa.

3.4 Image Parameter Adjustment

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: Bitikîne AUTO FOCUS button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• BACKLIGHT Button: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 Preset

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press DERBASBÛN xilas bike. Rojnamevanî ESC derketin.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press DERBASBÛN to recall. Press ESC derketin.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 Navîgasyon Menu

• Bişkoka MENU: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), DERBASBÛN confirms selections, and ESC acts as a back button.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 Paqijkirin

• Use a soft, dry cloth to clean the exterior of the controller.
• Ji bo qirêjiya serhişk, hinekî dampen the cloth with water or a mild, non-abrasive cleaning solution.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 Storage

• When not in use for extended periods, store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Amûrê ji toz û nemê biparêzin.

5. Destpêkirin

Ev beş çareseriyên pirsgirêkên hevpar ên ku hûn dikarin pê re rû bi rû bimînin peyda dike.

5.1 Hêz tune

• Çavkaniya Hêzê kontrol bikin: Piştrast bike ku adaptora hêzê bi ewlehî hem bi kontrolkerê û hem jî bi priza hêzê ya dixebite ve girêdayî ye.
• PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• Yekbûna kabloyê: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• Têkiliya torê: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• Neheviya protokolê: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• Nasnameya kamerayê: Ensure the correct camera ID is selected on the controller.
• Belgeyên Têketinê: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web interface.
• Girêdana Serial: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• Firmware: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webmalper ji bo nûvekirinan.

5.3 Pirsgirêkên Dîmendera LCD

• Nîşanek tune: Piştrast bike ku kontrolker vekirî ye.
• Nîşana tarî: Check if there are any brightness settings on the controller that can be adjusted.

6. Specifications

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

7. Xwenîşandana Vîdyoya Berhemê

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. Garantî û Piştgirî

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official website.

• Çêker: Xiamen RGBlink Science & Technology Co.,Ltd.
• Fermî Webmalper: www.rgblink.com (Têbînî: Ev cîhgirek e URL, please refer to your product packaging or official documentation for the correct support website.)
• Agahiyên Têkilî: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.