Junsun JS-US-SUB1206

Junsun 12-inch 800W Powered Spare Tire Car Subwoofer User Manual

Model: JS-US-SUB1206

1. Destpêk

Thank you for choosing the Junsun 12-inch 800W Powered Spare Tire Car Subwoofer. This product is designed to enhance your vehicle's audio system by delivering powerful, distortion-free bass. Its innovative hidden spare tire design allows for discreet installation, saving valuable trunk space and offering an anti-theft benefit. This manual provides essential information for safe installation, operation, and maintenance of your subwoofer.

2. Agahiyên Ewlekariyê

Ji kerema xwe berî sazkirin û bikaranînê hemû rêwerzan bi baldarî bixwînin. Neşopandina van rêwerzan dikare bibe sedema birîndarbûn an zirara giran a hilberê an wesayîtê.

  • Berî destpêkirina her sazkirina elektrîkê, her gav termînala neyînî ya bataryayê ya wesayîtê veqetînin.
  • Ensure proper grounding of the subwoofer to the vehicle chassis.
  • Use appropriate gauge wiring as specified in the installation section to prevent overheating and electrical hazards.
  • Do not install the subwoofer in a location that obstructs the driver's view or interferes with vehicle operation.
  • Dûr nehêlin ku subwoofer li ber şilbûn an germahiya zêde.
  • Heke hûn di derbarê ti beşek ji pêvajoya sazkirinê de ne ewle ne, alîkariya pispor bigerin.

3. Naveroka pakêtê

Berî ku hûn bi sazkirinê berdewam bikin, piştrast bikin ku hemî tişt di pakêtê de hene.

  • Spare tire active subwoofer (1 pc)
  • Owner's Manual (English) (1 pc)
  • Screw with nut (M6x200mm) (1 pc)
  • Plug and play wire harness & Signal line (1 pc)
  • Kontrola dûr (1 pc)
Image showing all components included in the Junsun 12-inch 800W Powered Spare Tire Car Subwoofer package, including the subwoofer unit, various wiring harnesses, a remote control, and mounting hardware.

Figure 3.1: Included Components and Wiring Kit

4. Taybetmendiyên Hilberê

  • Powerful Output Performance: This 12-inch powered subwoofer delivers 800W peak power and 220W RMS power, ensuring powerful, distortion-free bass.
  • Innovative Hidden Spare Tire Design: Fits perfectly into your vehicle's spare tire well, saving trunk space and offering an anti-theft benefit due to its concealed nature.
  • All-in-One Plug & Play Solution: Integrates the subwoofer, built-in amplifier, and enclosure, and comes with a full wiring kit, simplifying installation.
  • Professional Sound Tuning Controls: Fine-tune your sound precisely via the onboard controls or included wired remote, adjusting the Low-Pass Filter (LPF), Gain, and Bass Boost.
  • Lihevhatina Wesayîta Berfireh: Supports both high-level speaker wire input and RCA low-level input with auto turn-on functionality, integrating with most factory and aftermarket stereos.
  • Durable Cast Aluminum Enclosure: Built with a high-strength cast aluminum enclosure for robust durability, corrosion resistance, and superior heat dissipation.
  • Multi-Layered Protection Circuitry: Equipped with built-in triple protection against overheating, overload, and short circuits.
Image showing the Junsun subwoofer discreetly installed within a vehicle's spare tire well, demonstrating its hidden design.

Figure 4.1: Hidden Spare Tire Design

Image illustrating the 800W peak power output of the subwoofer, along with visuals of the wired remote controller and overload protection features.

Figure 4.2: Power and Control Features

5. Specifications

Image displaying the control panel features, detailed specifications, and a list of contents for the Junsun subwoofer.

Figure 5.1: Panel Features and Specifications

TaybetîGiranî
Navê ModelJS-US-SUB1206
Type SpeakerSubwoofer
Hêza RMS220W
MAX Power800W
THD<1.0%
Rêjeya îşaret-bi-deng> 91dB
Bersiva Frequency20Hz-150Hz
Input Sensitivity (High Level)1V
Input Sensitivity (Low Level)0.4V
Parzûna derbasbûna kêm50Hz-150Hz
Bass Boost0 heta +12dB
Parzûna Subsonic20Hz
Nirxandina fuzeyê30A
Diameter Subwoofer12 Inches
Mezinahiya Hilberê2.95"D x 10.24"W x 13.58"B
MalElemyûn

6. Sazkirin

The Junsun subwoofer is designed for straightforward installation. It can be placed in the spare tire well of most vehicles. Follow these general steps for installation:

  1. Wesayîtê amade bikin: Disconnect the negative terminal of your car battery. Locate your spare tire well.
  2. Subwooferê saz bike: Place the subwoofer securely in the spare tire well. Use the provided screw and nut to fasten it if your vehicle's spare tire mounting system allows.
  3. Têlkirina hêzê: Run the power wire from the subwoofer to the car's battery. Ensure the wire is properly routed and protected from sharp edges or moving parts. Connect the inline fuse holder close to the battery.
  4. Têlên Erdê: Connect the ground wire from the subwoofer to a clean, unpainted metal surface on the vehicle chassis. Ensure a solid connection for optimal performance and safety.
  5. Nîşana Têketinê: Connect the signal wires from your car's head unit to the subwoofer. You can use either high-level speaker wire inputs or RCA low-level inputs, depending on your head unit's capabilities.
  6. Çalakkirina Dûr: Connect the remote turn-on wire to a switched 12V source from your head unit (e.g., amplifier remote output).
  7. Kontrola dûr ve girêdin: Attach the included wired remote control to the subwoofer. Route the cable to a convenient location for easy access while driving.
  8. Kontrolên dawî: Double-check all connections for security and proper polarity. Reconnect the negative battery terminal.
Image showing the Junsun subwoofer placed inside a car's spare tire compartment, with some wiring visible, illustrating the hidden installation concept.

Figure 6.1: Subwoofer Placement in Spare Tire Well

Image depicting a detailed wiring diagram for the Junsun subwoofer, showing connections for power, ground, signal inputs, and remote turn-on.

Wêne 6.2: Diagramiya Wiring

7. Operasyon

Once installed, you can control and fine-tune your subwoofer using the wired remote control.

7.1 Kontrola Dûr a Bi Kabloyî

The remote control allows you to adjust key settings for optimal bass performance:

  • Gain Control (MIN/MAX): Adjusts the overall output level of the subwoofer. Start with a low setting and gradually increase until the desired bass level is achieved without distortion.
  • Bass Boost (0dB/6dB/12dB): Provides an additional boost to low frequencies. Use sparingly to avoid over-driving the subwoofer.
  • Low-Pass Filter (LPF) (30Hz-150Hz): Controls the upper frequency limit of the subwoofer. Set this to blend smoothly with your main speakers.
  • Phase Switch (0°/180°): Adjusts the phase of the subwoofer output. Experiment with both settings to find the one that provides the most cohesive bass response with your main speakers.
Image of the wired remote control for the Junsun subwoofer, showing its various knobs for gain, bass boost, LPF, and phase adjustment.

Figure 7.1: Wired Remote Control

8. Maintenance

To ensure the longevity and optimal performance of your Junsun subwoofer, follow these maintenance guidelines:

  • Paqijî: Use a soft, dry cloth to clean the exterior of the subwoofer. Do not use harsh chemicals or abrasive cleaners.
  • Perwanekirin: Ensure that the subwoofer's enclosure has adequate airflow, especially if it's installed in a confined space. Proper ventilation helps dissipate heat and prevents overheating.
  • Kontrola Têlê: Periodically check all wiring connections for tightness and signs of wear or corrosion. Loose connections can lead to poor performance or electrical issues.
  • Guhertina sîgorteyê: If the fuse blows, replace it only with a fuse of the same type and rating (30A). Never use a higher-rated fuse or bypass the fuse, as this can cause serious damage or fire.

9. Destpêkirin

If you experience operation or performance problems with this product, compare your installation with the electrical wiring diagram and review serişteyên çareserkirina pirsgirêka jêrîn.

Image of a troubleshooting table for the Junsun subwoofer, listing common symptoms like amplifier not powering up, protection LED, high hiss, squealing noise, distorted sound, amplifier getting hot, engine noise (static), and engine noise (alternator whine), along with possible remedies for each.

Figure 9.1: Troubleshooting Guide (Part 1)

Image of a troubleshooting table for the Junsun subwoofer, continuing from the previous section, providing remedies for issues like high hiss, squealing noise, distorted sound, amplifier getting hot, engine noise (static), and engine noise (alternator whine.

Figure 9.2: Troubleshooting Guide (Part 2)

10. Garantî û Piştgiriya Mişterî

Junsun prioritizes your satisfaction. This subwoofer comes with a 3-year replacement warranty.

For any questions or support during your audio upgrade journey, our dedicated customer service team is available 24/7 to assist you.

10.1 How to Contact Support

You can typically find contact information for Junsun customer support through the retailer where you purchased the product or on the official Junsun website.

Image showing steps to contact Junsun Car Electronics customer support, indicating where to find the seller information and an 'Ask a question' button on a retail platform.

Wêne 10.1: Agahiyên Piştgiriya Xerîdar