Manual Instruction

Pêşkêş

This manual provides essential instructions for the installation, operation, and maintenance of the Fricparts replacement lid lock latch for Kenmore 11029133413 washing machines. Please read this manual thoroughly before proceeding with installation to ensure safe and correct usage.

Agahiyên Ewlekariyê

• Hêzê qut bikin: Always unplug the washing machine from the electrical outlet before attempting any repairs or maintenance. Failure to do so can result in electric shock or serious injury.
• Amûrên Parastinê Li Xwe Bikin: Ji bo rêgirtina li birîndarbûnê, alavên parastina kesane yên guncaw, wek lepikan, bikar bînin.
• Alîkariya Pîşeyî: If you are unsure about any step or uncomfortable performing the repair, consult a qualified appliance technician.
• Bi lênêrînê re mijûl bibin: Appliance parts can have sharp edges. Handle all components carefully.

Naveroka pakêtê

• 1 x Kenmore 11029133413 Washer Lid Lock Latch Replacement Part (Fricpart-074863)

Compatibility

This replacement part is specifically designed for Kenmore washing machine model 11029133413. Verify your washer's model number before installation to ensure proper fit and function. Appliance parts can appear similar; confirming the model number is crucial.

Sazkirin û Sazkirin

Follow these steps carefully to replace the washer lid lock latch:

1. Prepare the Washer:
   • Makîneya şuştinê ji priza elektrîkê veqetînin.
   • Avê şuştinê vekin.
   • Move the washer away from the wall to allow access to the rear and top.
2. Access the Lid Lock:
   • Depending on your specific Kenmore model, you may need to remove the control panel or the entire top panel of the washer. Typically, the control panel can be lifted or unclipped, and the top panel may have screws at the rear or clips at the front. Refer to your washer's service manual for exact panel removal instructions.
   • Locate the existing lid lock latch assembly, usually mounted near the front edge of the washer opening.
3. Disconnect the Old Latch:
   • Carefully disconnect the electrical wiring harness from the old lid lock latch. There is usually a tab or clip that needs to be pressed to release the connector.
   • Remove any screws or clips securing the old lid lock latch to the washer frame.
   • Gently remove the old lid lock latch assembly.
4. Install the New Latch:
   • Position the new Fricparts lid lock latch replacement part in the same location as the old one.
   • Secure it with the screws or clips that were removed earlier. Ensure it is firmly seated and aligned correctly.
   • Connect the electrical wiring harness to the new lid lock latch. Make sure the connector clicks into place securely.
5. Ji nû ve kom bikin û biceribînin:
   • Carefully reattach the control panel or top panel of the washer. Ensure all screws and clips are reinstalled.
   • Makîneya şuştinê dîsa bi priza elektrîkê ve girêdin.
   • Avê vekin.
   • Perform a test cycle to ensure the lid lock latch functions correctly. The lid should lock when the cycle starts and unlock when the cycle is complete or paused.

Image: The Fricparts replacement lid lock latch assembly for Kenmore 11029133413 washers. This image displays the complete replacement lid lock latch assembly, featuring the white plastic latch mechanism connected to a gray wiring harness with a multi-pin connector at the end.

Telîmatên Operating

The lid lock latch is an integral safety component of your washing machine. Its operation is automatic:

• When a wash cycle begins, the lid lock latch engages, preventing the lid from being opened during agitation and spin cycles. This ensures user safety and prevents water spillage.
• The lid will remain locked until the cycle is complete or paused, and the internal components have come to a stop.
• If the lid fails to lock, the washer will typically not start or will display an error code.

Lênerrînî

The lid lock latch is a sealed unit and generally requires no specific maintenance. However, to ensure its longevity and proper function:

• Keep the area around the lid lock mechanism clean and free of debris, lint, or detergent residue.
• Avoid forcing the washer lid open when the lock is engaged.
• Regularly inspect the wiring harness for any signs of wear or damage.

Çareserkirina pirsgirêkan

Specifications

• Hejmara Beşê: FRIC-PL-APP-TP-22052025-090779
• Hejmara Modela Babetê: Fricpart-074863
• Çêker: Fricparts
• Reng: Black/White (referring to wiring/housing)
• Jimarî: 1 perçe
• Lihevhatî: Kenmore 11029133413 Makîneya şuştinê

Garantî û Piştgirî

Information regarding specific warranty terms for this replacement part is not provided in the product details. For warranty inquiries or technical support, please contact the seller or manufacturer directly. Ensure you retain your purchase receipt for any warranty claims.