BETAFPV Meteor75 Pro Brushless Whoop Quadcopter User Manual

1. Destpêk

The BETAFPV Meteor75 Pro Brushless Whoop Quadcopter is an advanced FPV drone engineered for superior flight performance and high-definition aerial photography. It integrates cutting-edge technology, including the Matrix 1S 3IN1 HD Flight Controller, designed to provide a stable and responsive flying experience. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your Meteor75 Pro.

Wêne 1: Serview of the Meteor75 Pro HD Brushless Whoop Drone, optimized for DJI O4 Air Unit.

2. Naveroka pakêtê

Please verify all items are present in your package before proceeding with assembly or operation:

• 1* Meteor75 Pro HD Brushless Quadcopter (PNP Version)
• 1* Canopy for O4 Air Unit
• 4* GF 45mm 3-Blade Propellers
• 1* Type-C to SH1.0 Adapter
• 1* SH1.0-4Pin Adapter Cable
• 1* SH1.0-6Pin HD Cable
• 1* 5.8G VTX Antenna
• 4* Shock-absorbing Balls
• 8* Shock-absorbing Balls for O4
• 1* DJI O4 Camera Bracket
• 1* Shock-absorbing Mount for DJI O4 Camera
• 4* M1.4*10*4 Phillips Flat Washer Head Tapping Screws
• 4* M1.4*4 Phillips Flat Head Screws
• 4* M2*4 Flat Head Socket Cap Screws
• Tools: Phillips screwdriver, Tweezers, M2 screwdriver

Figure 2: All components included in the Meteor75 Pro package.

3. Sazkirin û Sazkirin

Follow these steps carefully to assemble and prepare your Meteor75 Pro for flight. Refer to the accompanying video for visual guidance.

3.1 DJI O4 Air Unit Installation

1. Insert the O4 camera into the camera bracket. Ensure the forward direction of the O4 camera aligns with the connector.
2. Place the slots of the O4 camera bracket into one hole of four shock-absorbing balls separately. Repeat for all four balls.
3. Install the shock-absorbing mount's slots into the corresponding holes of these balls. Repeat for all four points.
4. Check the installation status of the shock-absorbing balls. The camera protection should be upward.
5. Place the side of the camera with the connector facing towards the canopy. Align the holes of the camera's shock-absorbing mount with the holes in the canopy.
6. Secure the camera and canopy with two M2*4 flat head socket cap screws from both sides. After adjusting the camera angle (10° to 35°), tighten the screws to ensure proper installation.

3.2 VTX Shock Absorption Module Installation

1. With the side of the HD module that has the antenna facing up, insert the 6.6mm shock-absorbing balls into the module's holes, ensuring that the higher end of the shock-absorbing balls is facing down.
2. Insert the 6Pin connector cable into the O4 VTX module.
3. Insert the VTX antenna into the antenna connector on the O4 VTX module.
4. After the installation of O4, please check the canopy in various views to ensure shock-absorbing balls are tight and no risk of falling off.

3.3 Civîna Dawî

1. Remove the two screws that secure the flight controller on the Meteor75 Pro O4.
2. Distinguish the front of the drone, ensuring that the head of Meteor75 Pro O4 aligns with the arrow on the flight controller.
3. Insert one end of the O4 VTX cable into the connector on the flight controller.
4. Make the O4 VTX module upward, and then place the O4 VTX module on the flight controller so that its holes align with the holes of the entire flight control unit.
5. Tighten the forward shock-absorbing ball of the O4 VTX module with one M1.4*10*4 Phillips flat washer head tapping screw by Phillips screwdriver.
6. Place the canopy on the O4 VTX module, making sure the camera is forward and the holes of the canopy align with the shock-absorbing balls.
7. Place the VTX antenna through the rear hole of the canopy.
8. Tighten the canopy with three M1.4*10*4 Phillips flat washer head tapping screws by Phillips screwdriver.
9. After installation, please check the tightness of the shock-absorbing balls on the O4 VTX module. It is recommended that the shock-absorbing balls should not be significantly compressed so that the balls maintain the height to achieve optimal shock absorption.
10. Replace the camera cable with tweezers. To reduce vibration, ensure the camera cable is suspended and prevent it from touching the canopy.

Wêne 3: Ji nêzîk ve view of the Matrix 1S Brushless Flight Controller HD.

Figure 4: Illustration of the shock-absorbing components designed for the O4 Air Unit.

Figure 5: The specially designed canopy for the O4 Air Unit, allowing adjustable camera angles.

4. Telîmatên Operating

The Meteor75 Pro is designed for advanced users familiar with FPV drone operation. It requires a compatible remote control and FPV goggles (not included) for flight. Ensure your remote control is properly bound to the drone and all settings are configured according to the flight controller's software (e.g., Betaflight) before attempting flight.

4.1 Kontrolên Berî Firînê

• Inspect propellers for any damage or cracks.
• Ensure the battery is fully charged and securely attached.
• Verify all connections (camera, VTX, motors) are secure.
• Check the flight area for obstacles and ensure it is safe for flight.

4.2 Flight Basic

After powering on the drone and connecting your FPV goggles, arm the motors using your remote control's designated switch. Gently increase throttle for takeoff. Practice hovering and basic maneuvers in an open, safe environment before attempting advanced flights.

4.3 Daxistina

Reduce throttle slowly to descend. Disarm the motors once the drone has safely landed to prevent accidental propeller spin.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Meteor75 Pro.

• Kontrola Propeller: Regularly check propellers for bends, nicks, or cracks. Replace damaged propellers immediately as they can cause vibrations and affect flight stability.
• Paqijî: Use a soft brush or compressed air to remove dust and debris from the motors, flight controller, and other components. Avoid using liquids directly on electronics.
• Lênêrîna Pîl: Store LiPo batteries at storage voltage (around 3.8V per cell) when not in use for extended periods. Do not overcharge or over-discharge batteries.
• Tengbûna pêçanê: Periodically check all screws, especially those securing the flight controller and motors, to ensure they are tight.

6. Destpêkirin

Ev beş pirsgirêkên hevpar ên ku hûn dikarin pê re rû bi rû bimînin çareser dike.

7. Specifications

8. Garantî û Piştgirî

For warranty information and technical support, please refer to the official BETAFPV webmalperê an rasterast bi karûbarê xerîdar a wan re têkilî daynin. Ji bo her îdîayên garantiyê delîla kirîna xwe biparêzin.

For additional resources and community support, you may visit the BETAFPV Store on Amazon.