PRUVEEO D90-4CH Dash Cam and Hardwire Kit User Manual

1. Destpêk

This manual provides comprehensive instructions for the installation, operation, and maintenance of your PRUVEEO D90-4CH Dash Cam and ACC Hardwire Kit. This bundle is designed to provide continuous surveillance for your vehicle, especially with its 24-hour parking monitor mode.

Wêne 1.1: Serview of the PRUVEEO D90-4CH Dash Cam and Hardwire Kit.

2. Taybetmendiyên sereke

• Moda parkkirinê ya 24 saetan: The included hardwire kit enables the dash cam's parking monitor to function continuously, even when the vehicle's engine is off. This provides uninterrupted power for extended surveillance.
• Low Voltage Parastin: An intelligent system is integrated into the hardwire kit to prevent vehicle battery drain. It automatically cuts off power to the dash cam if the car battery voltage drops below 11.8V (for 12V systems) or 23.5V (for 24V systems), ensuring sufficient power remains to start your vehicle.
• Lihevhatina Berfireh: The hardwire kit supports input voltages from 12V to 30V and provides a 5V/3A output, making it compatible with various vehicles and Mini USB interface devices.
• Quad Camera System: The D90-4CH features multiple cameras (Front, Left, Right, Rear) for comprehensive coverage around your vehicle.
• Super Night Vision: Equipped with advanced night vision capabilities, including an F1.8 aperture and infrared lights for the cabin camera, ensuring clear recordings in low-light conditions.
• Kilîda Awarte: Automatically locks current video footage upon detecting a sudden impact or collision, preventing it from being overwritten.
• Tomarkirina Loop: Continuously records by overwriting the oldest footage when the memory card is full, ensuring uninterrupted recording.

Image 2.1: Illustration of the D90-4CH's quad camera system and key features.

Image 2.2: Demonstration of Super Night Vision capabilities in various lighting conditions.

3. Çi di Qutîkê de ye

Dema ku hûn ji qutiyê vedikin, ji kerema xwe piştrast bikin ku hemî pêkhateyên jêrîn di nav de ne:

• PRUVEEO D90-4CH Dash Cam
• Mini USB to Hardwire Kit
• Installation Crowbar
• 8 x Fuse Tap Cables (various types)
• 4 x Cable Hiding Clips
• Karta Micro SD ya 128GB (berê sazkirî an jî cuda tê de ye)

Image 3.1: Components of the ACC Hardwire Kit.

4. Sazkirin û Sazkirin

4.1 Sazkirina Kamera Dashboardê

Mount the D90-4CH Dash Cam securely on your vehicle's dashboard or windshield, ensuring it does not obstruct your view. Use the provided adhesive mount or suction cup mount as appropriate. Position the front camera to capture the road ahead clearly, and adjust the cabin camera for optimal interior view.

4.2 Hardwire Kit Installation for 24-Hour Parking Mode

The hardwire kit connects your dash cam directly to your vehicle's fuse box, providing continuous power for parking mode and protecting against battery drain.

1. Identify Fuse Box: Locate your vehicle's fuse box. Refer to your vehicle's owner's manual for its exact location (typically under the dashboard, in the engine bay, or in the trunk).
2. Têlên girêdanê: The hardwire kit has three wires:
   • Têla Sor (ACC): Connect to a fuse that is only powered when the ignition is on (e.g., radio, cigarette lighter). Use one of the provided fuse tap cables.
   • Yellow Wire (12V Normal Power): Connect to a fuse that has constant power, even when the ignition is off (e.g., hazard lights, interior lights). Use a fuse tap cable.
   • Black Wire (Ground): Connect to a metal bolt or screw on the vehicle's chassis that provides a good ground connection.
3. Insert Fuse Taps: Select the appropriate fuse tap cable for your vehicle's fuse type. Insert the original fuse into the lower slot of the fuse tap, and a new fuse (of the same rating as the original) into the upper slot for the dash cam circuit.
4. Kabloyên rê: Carefully route the hardwire kit cables along the vehicle's trim and headliner using the provided cable hiding clips and installation crowbar to ensure a neat and secure installation.
5. Bi Dash Cam-ê ve girêdin: Plug the Mini USB connector from the hardwire kit into the corresponding port on your D90-4CH Dash Cam.
6. Têkiliya Testê: Start your vehicle to ensure the dash cam powers on. Turn off the vehicle and remove the key to verify that the parking mode activates (the dash cam should remain powered or enter a low-power parking mode).

Image 4.1: Wiring diagram for the ACC Hardwire Kit connection to the vehicle's fuse box.

Image 4.2: The LED indicator on the hardwire kit illuminates when correctly installed (ACC and Black wires).

5. Telîmatên Operating

5.1 Operasyona bingehîn

Once powered, the D90-4CH Dash Cam will automatically begin recording. The display will show the live view from the cameras. You can switch between camera views (front, cabin, rear, split-screen) using the buttons on the device.

5.2 Parking Monitor Mode

With the hardwire kit correctly installed, the dash cam will automatically switch to parking monitor mode when the vehicle's ignition is turned off. In this mode, the dash cam will detect impacts or motion (if enabled) and record short video clips to capture events while parked.

5.3 Accessing Recordings

Recordings are saved to the Micro SD card. You can view recordings directly on the dash cam's screen, or remove the SD card and insert it into a computer for playback and backup. Emergency locked videos are stored in a separate folder to prevent overwriting.

Wêne 5.1: Berêamples of video capture from the D90-4CH's multiple cameras.

6. Maintenance

• Lensên Paqij: Regularly clean the camera lenses with a soft, lint-free cloth to ensure clear video quality. Avoid abrasive materials.
• Rêvebiriya Karta SD: Periodically format the Micro SD card (at least once a month) to maintain optimal performance and prevent data corruption. Back up important footage berî formatkirinê.
• Nûvekirinên Firmware: Check the PRUVEEO official website for any available firmware updates to ensure your dash cam has the latest features and bug fixes.
• Germî: Ji bo demên dirêj dûr bisekinin ku kameraya dashboardê li germahiyên zêde rû bi rû bimîne.

7. Destpêkirin

• Kamera Dashê Vênake:
  • Check all cable connections, especially the hardwire kit connections to the fuse box and ground.
  • Verify that the vehicle's fuses are intact and not blown.
  • Ensure the vehicle battery has sufficient charge.
• Parking Mode Not Working:
  • Confirm the yellow wire of the hardwire kit is connected to a constant power fuse.
  • Dengê kêm kontrol bikintage protection setting; if the battery voltage is too low, the kit will cut power.
• Kalîteya Vîdyoyê ya Nebaş:
  • Lensên kamerayê paqij bikin.
  • Piştrast bikin ku fîlima parastinê ji lensan hatiye rakirin.
  • Check dash cam settings for resolution and exposure.
• SD Card Error/Recording Issues:
  • Format the Micro SD card within the dash cam's settings.
  • Ensure you are using a high-speed (Class 10 or U3) Micro SD card.
  • Ji bo dûrxistina xeletiya kartê, qertek Micro SD ya cûda biceribîne.

8. Specifications

9. Garantî û Piştgirî

For warranty information, technical support, or service inquiries, please contact PRUVEEO customer support directly. Refer to the product packaging or the official PRUVEEO webmalper ji bo agahdariya têkiliyê ya herî nûjen û siyaseta garantiyê.

You can also visit the official PRUVEEO Store on Amazon for more information: PRUVEEO Store