Daakro ZK-502L Bluetooth Amplifier Desteya Bikarhêner

1. Destpêk

The Daakro ZK-502L is a high-fidelity 2.0 channel Bluetooth amplifier board designed for DIY audio projects. It delivers 50W + 50W output power, features dual audio input modes (Bluetooth 5.0 and AUX), and operates within a wide DC 9-24V voltage range. This manual provides detailed instructions for the proper setup, operation, and maintenance of your ampboard lifier.

2. Taybetmendiyên Hilberê

• Dual HiFi Chip: Utilizes two HiFi amplifier chips with PurePath technology for ultra-high resolution, low distortion, and high-fidelity sound.
• 2.0 Channel Output: Supports left and right channel configuration, providing 50W output power per channel for an immersive sound experience.
• Dual Audio Input Modes: Seamlessly switch between Bluetooth 5.0 for wireless connectivity and traditional AUX input for wired audio sources.
• Wide Voltage Range: Compatible with DC 9-24V power supplies, allowing flexibility with 9V, 12V, 19V, or 24V sources.
• Lihevhatina Axaftvan: Suitable for 20-200W, 4-8Ω speakers, ensuring broad compatibility with various speaker sizes.
• Parastina Berfireh: Built-in mechanisms include over-voltage, di bin-voltage, over-temperature, short-circuit, and reverse connection protection for device safety.
• Kontrolkirina Volume: Integrated volume knob for easy adjustment of audio output.

3. Naveroka pakêtê

Piştrast bike ku hemû tiştên ku li jêr hatine navnîş kirin di pakêta te de hene:

• ZK-502L AmpLifier Board
• Top and Bottom Acrylic Plates
• Mounting Hardware (Screws, Spacers, Nuts)
• Volume Knob Cap
• Cable Power DC
• Screwdriver biçûk

4. Nasnameya Component

Familiarize yourself with the various components and connection points on the amplifier board:

• Power Input (DC 9-24V): Connect your DC power supply here.
• Left Channel Output (-L +): Connect the left speaker here.
• Right Channel Output (-R +): Connect the right speaker here.
• Kontrolkirina Volume: Rotary knob to adjust the audio output level.
• Nîşana Bluetooth: LED light indicating Bluetooth status.
• Ketina AUX: Jack 3.5 mm ji bo girêdana dengê bi kabloyî.

5. Specifications Teknîkî

6. Power Output Guidelines

The actual output power varies depending on the input voltage and speaker impedance. Refer to the table below for typical power output values:

Ji kerema xwe Têbînî: Optimal audio output requires sufficient audio input combined with appropriate power supply voltage and current. A higher voltage and current generally result in higher power output. For the same conditions, a smaller speaker impedance will yield greater power.

7. Rêwerzên Sazkirinê

Follow these steps to set up your Daakro ZK-502L amplifier board:

1. Assemble the Casing (Optional): If your board came with acrylic plates, use the provided screws and spacers to assemble the protective casing around the ampboard lifier.
2. Axaftvanan Girêbide: Connect your passive speakers to the Left Channel Output (-L +) and Right Channel Output (-R +) terminals. Ensure correct polarity (+ to + and - to -).
3. Pêvekirina Hêzê: Connect a DC 9-24V power adapter (not included) to the Power Input jack. Ensure the power supply meets the voltage and current requirements for your desired output.
4. Mîhenga Destpêkê ya Deng: Turn the volume control knob counter-clockwise to its minimum position before powering on.

8. Telîmatên Operating

The ZK-502L amplifier board supports two audio input modes:

8.1. Moda Bluetooth

1. Hêzdarkirin: Piştrast bike amplifier board is powered on. The Bluetooth indicator LED will blink, indicating it is in pairing mode.
2. Hevgirtin: On your audio source device (e.g., smartphone, tablet, PC), enable Bluetooth and search for available devices. Select "ZK-502L" from the list.
3. Pejirandina Girêdanê: Once successfully paired, the Bluetooth indicator LED will stop blinking and remain solid.
4. Deng lêbide: Start playing audio on your connected device. Adjust the volume using the amplifier board's volume knob and your source device's volume controls.

8.2. AUX Input Mode

1. Kabloya AUX ve girêdin: Insert a 3.5mm audio cable (not included) into the AUX Input jack on the amplifier board. Connect the other end to your audio source device's headphone or audio output jack.
2. Veguheztina otomatîk: Ew amplifier board will automatically switch to AUX input mode when a cable is detected.
3. Deng lêbide: Start playing audio on your connected device. Adjust the volume using the amplifier board's volume knob and your source device's volume controls.

9. Tedbîrên Ewlekariyê

• Pêbaweriya dabînkirina hêzê piştrast bikintage is within the DC 9-24V range. Using an incorrect voltage dikare zirarê bide amûrê.
• Do not short-circuit the speaker outputs or power input.
• Avoid exposing the board to moisture, extreme temperatures, or direct sunlight.
• Handle the board with care to prevent damage to components.
• Disconnect power before making any connections or disconnections.
• Do not attempt to modify the circuit board, as this will void the warranty and may cause damage.

10. Destpêkirin

• Deng tune:
  • Check if the power supply is connected correctly and providing the correct voltage.
  • Verify speaker connections for correct polarity and secure contact.
  • Ensure the volume knob is turned up on both the amplifier board and the audio source device.
  • If using Bluetooth, ensure the device is paired and connected. If using AUX, ensure the cable is fully inserted.
• Dengê Xerab:
  • Reduce the volume on both the amplifier and the source device.
  • Ensure the power supply can provide sufficient current for the desired output power.
  • Check speaker impedance compatibility (4-8Ω).
• Veqetandina Bluetooth:
  • Ensure the audio source device is within the 16.4 feet (5 meters) Bluetooth range.
  • Avoid obstacles that may interfere with the Bluetooth signal.
  • Biceribînin ku cîhazê ji hev veqetînin û ji nû ve hevber bikin.
• Power Indicator Not On:
  • Check the power supply connection and ensure it is functioning.
  • Verify that the power input terminals are correctly wired.

11. Garantî û Piştgirî

Daakro provides the following support for your ZK-502L amplifier board:

• 30 Roj Garantî: Your product is covered by a 30-day warranty from the date of purchase.
• 24 Hours Online Customer Service: For any inquiries or technical assistance, please contact Daakro customer support.
• 100% Customer Satisfaction: Daakro is committed to ensuring your satisfaction with their products.

For further assistance, please visit the official Daakro store or contact their customer service team.