Globo Lighting BOSTON Outdoor Pedestal Light

1. Destpêk

Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.

2. Telîmatên Ewlekariyê

• Ewlehiya Elektrîkê: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
• Bikaranîna Derveyî: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
• Tîpa ampûlê: Use only E27 bulbs with the specified wattage. Ji watê ya herî zêde derbas nekintage li ser pêvekê hatî destnîşan kirin.
• Handling: Bi baldarî bi amûrê re tevbigerin. Nehêlin ew bikeve xwarê an jî rastî bandorên dijwar were.
• Paqijî: Do not use abrasive cleaners or solvents. Clean with a soft, damp çît.
• Germa: Berî ku hûn hewl bidin ampûlê biguherînin, bila bi tevahî sar bibe.

3. Naveroka pakêtê

Please check that all components are present and undamaged before beginning installation:

• 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
• 1x Bingeha Mounting
• 1x Set of Mounting Hardware (screws, anchors)
• 1x Manual Bikarhêner

Note: E27 bulb is not typically included and must be purchased separately.

4. Specifications

5. Sazkirin û Sazkirin

Giring: Ensure the main power supply is switched off at the circuit breaker before commencing installation.

1. Cih hilbijêrin: Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
2. Amadekirina têlan: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
3. Bingehê bixin: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
4. Têlên Elektrîkê girêdin: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
5. Bulb saz bikin: Insert a suitable E27 bulb (not included) into the lamp xwedî. Zêde teng nekin.
6. Çêkirina Ewle: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
7. Vejandina Hêzê: Dema ku sazkirin qediya û hemî girêdan ewle bûn, elektrîkê li şkênera sereke vegerînin.

Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.

6. Telîmatên Operating

The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.

• Hêzdarkirin: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
• Sensorê tevgerê: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
• Girtina otomatîkî: After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
• Day/Night Sensor: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.

Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.

Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.

7. Maintenance

• Paqijî: Bi rêkûpêk pêlavê bi nermî paqij bikin, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
• Guhertina Bulb:
  1. Ensure the power supply to the fixture is turned off at the circuit breaker.
  2. Berî ku hûn ampûla kevin lê bikin, bila bi tevahî sar bibe.
  3. Carefully unscrew the top cover or access panel to reach the E27 bulb.
  4. Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
  5. Securely reattach the cover or access panel, ensuring a watertight seal.
  6. Hêzê vegerînin.
• Berçavderbasî: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.

8. Destpêkirin

If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.

9. Garantî û Piştgirî

This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.

Agahiyên têkiliyê bi gelemperî li ser pakkirina hilberê an li ser malpera fermî ya çêker têne dîtin. website.