Pêşkêş
Thank you for choosing the Claiks Electric Standing Desk. This manual provides essential information for the safe and efficient use of your new desk. Designed for enhanced productivity and comfort, this height-adjustable desk allows you to seamlessly switch between sitting and standing positions, promoting a healthier work environment. Please read these instructions carefully before assembly and operation, and retain them for future reference.
Image: The Claiks Electric Standing Desk set up in an office, showcasing its spacious surface and integrated features like a hanging hook for a backpack.
Setup û Meclîsa
Assembly of the Claiks Electric Standing Desk typically takes approximately 1 hour. For optimal efficiency and to prevent fatigue, an electric screwdriver is highly recommended. Please follow the included diagrams for step-by-step instructions.
Naveroka pakêtê
Before beginning assembly, ensure all parts are present and undamaged. Refer to the parts list diagram below.
Wêne: Teqiyayek view illustrating all components of the Claiks Electric Standing Desk, including desktop panels, frame parts, and assembly hardware.
Tips Meclîsa
- Review Telîmat: Carefully read all assembly steps before starting.
- Parçeyên Organîzekirin: Hemû pêkhate û alavên pêwîst rêz bikin, wan li gorî navnîşa parçeyan bicîh bikin.
- Tornvîsa Elektrîkî: Use an electric screwdriver with appropriate bits for faster and easier assembly.
- Civîna Du Kesî: While possible for one person, having a second person can make assembly easier, especially when handling the desktop.
- Transmission Rod: Ensure the transmission rod is fully and securely inserted into its designated holes to prevent operational issues.
Image: A diagram detailing the desk's dimensions (160cm W x 80cm D x 72-118cm H) and highlighting features like the storage hook, cable clips, and footrest.
Emelî
The Claiks Electric Standing Desk features intuitive controls for height adjustment and memory presets, allowing you to customize your workspace effortlessly.
Rêzkirina Bilindahiyê
- Dirêjahî: The desk can be adjusted between 72cm and 118cm.
- Zûbûnî: The lifting speed is approximately 20mm/s.
- Panela Kontrolê: Bi kar tînin Up û Jêr arrows on the control panel to manually adjust the desk to your desired height.
Image: Two Claiks desks demonstrating the full height adjustment range, from a low sitting position to a high standing position.
Pêşniyarên bîranînê
The desk features a memory function to store up to three preferred heights for quick recall.
- Bi karanîna tîrên Jor/Jêr, maseyê li gorî bilindahiya xwestî eyar bikin.
- Bitikîne M button (if available, or a dedicated 'Set' button) followed by one of the numbered memory buttons (1, 2, an 3) to save the current height.
- Ji bo vegerandina bilindahiyek tomarkirî, tenê bişkoja hejmarî ya têkildar bikirtînin (1, 2, an 3). Maseya sermaseyê dê bixweber biçe pozîsyona hilanînê.
Image: A close-up of the desk's control panel, showing the digital height display, up/down arrows, and three memory preset buttons.
Operasyona bêdeng û xweş
The Claiks Electric Standing Desk operates quietly, with noise levels around 45dB, ensuring minimal disruption to your work environment. The lifting mechanism is designed for smooth and stable transitions.
Image: The desk in a quiet setting, with a graphic illustrating its low noise level (45dB) during operation.
Image: A house of cards on the desk, symbolizing the smooth and stable movement of the height adjustment.
Lênerrînî
Proper care and maintenance will ensure the longevity and optimal performance of your Claiks Electric Standing Desk.
Cleaning the Desktop
- The desktop surface is made of melamine resin, which is resistant to water, heat, and stains.
- For daily cleaning, wipe the surface with a soft, damp çît.
- For stubborn stains, use a mild soap solution and then wipe dry immediately.
- Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the surface finish.
Frame and Mechanism
- Hemû pêç û boltan bi awayekî periyodîk kontrol bikin da ku piştrast bibin ku ew teng in. Ger pêwîst be dîsa teng bikin.
- Keep the lifting columns free from dust and debris. Wipe with a dry cloth.
- Do not lubricate the lifting mechanism unless specifically instructed by customer support.
- Ensure power cables are not pinched or damaged.
Çareserkirina pirsgirêkan
If you encounter any issues with your Claiks Electric Standing Desk, refer to the following common troubleshooting steps.
Desk Not Moving or Responding
- Têkiliya Hêzê: Piştrast bike ku kabloya elektrîkê bi ewlehî hem bi maseyê û hem jî bi priza dîwarê ya dixebite ve girêdayî ye.
- Transmission Rod: Verify that the transmission rod connecting the lifting columns is fully and correctly inserted into its designated holes. A loose connection can prevent movement.
- Bargirankirin: Check if the desk is overloaded. The maximum load capacity is 80kg. Remove excess weight and try again.
- Reset: Some desks have a reset function. Consult the full manual or contact support for specific reset procedures.
Di dema Operasyonê de Dengên Neasayî
- While the desk is designed for quiet operation (approx. 45dB), minor sounds are normal.
- If you hear grinding, clicking, or excessively loud noises, stop operation immediately.
- Check for any obstructions under or around the desk that might be interfering with the lifting mechanism.
- Ensure all assembly screws are tight.
Uneven Lifting
- This can often be resolved by performing a reset procedure.
- Piştrast bikin ku mase li ser rûyek astê ye.
- Verify that the transmission rod is properly connected and not bent.
Eger ev gav pirsgirêkê çareser nekin, ji kerema xwe ji bo alîkariya bêtir bi piştgiriya xerîdar a Claiks re têkilî daynin.
Image: A child seated on the desk, illustrating its robust 80kg load capacity.
Specifications
| Taybetî | Hûrî |
|---|---|
| Nîşan | Claiks |
| Cins | 160 cm |
| Mezinahiya Hilberê (W x D x H) | 160cm x 80cm x 72-118cm |
| Range Adjustment Bilindahî | 72 cm heta 118 cm |
| Leza rakirina | 20mm/s |
| Kapasîteya barkirinê | 80 kg |
| Noise Level | Approx. 45dB |
| Materyalên Maseyê | Melamine Resin (Laminate finish) |
| Madeya bingehîn | Hesinî |
| Taybetmendiyên Yekbûyî | Keyboard tray, Memory function (3 presets) |
| Tîpa odeyê | Ofîs, Odeya Lêkolînê |
| ASIN | B0DBLFCT71 |
Garantî û Piştgirî
Claiks is committed to providing high-quality products and excellent customer service.
Garantiya Hilberîner
All Claiks Electric Standing Desks come with a Garantiya çêker a 3 salî. During this warranty period, Claiks offers free repair or replacement services for any manufacturing defects or malfunctions under normal use conditions.
Piştgiriya Mişterî
Our customer support team is available to assist you with any questions, assembly issues, or troubleshooting needs. We offer support in multiple languages, including English and Japanese.
Please feel free to contact us anytime through the retailer's platform or directly via the contact information provided on the official Claiks website.