Pêşkêş
Thank you for choosing the REDTIGER 11.5Ft USB Type-C Power Cord. This cable is specifically designed to provide a stable power supply to your REDTIGER series dash camera. Its extended length allows for flexible installation within your vehicle.
Important Note: This power cord is for power delivery only and does not support data transfer functions.
Image: The REDTIGER 11.5Ft USB Type-C Power Cord, showing the USB-A connector on one end and the right-angle USB-C connector on the other.
Agahiyên Ewlekariyê
- Ensure the power source in your vehicle provides the correct voltage and current for your dash camera.
- Do not modify or attempt to repair the power cord. Contact customer support if damaged.
- Keep the cable away from extreme heat, moisture, and sharp objects.
- Route the cable securely to avoid interference with vehicle controls or driver visibility.
Naveroka pakêtê
Di pakêtê de hene:
- 1 x REDTIGER 11.5Ft USB Type-C Power Cord
Talîmatên Setup
- Bi Dash Cam-ê ve girêdin: Insert the USB Type-C end of the power cord into the corresponding port on your REDTIGER dash camera. Ensure a firm connection.
Wêne: Nêzîk view of the right-angle USB Type-C connector securely plugged into the dash camera's power input port.
- Rêça kabloyê bişopînin: Carefully route the 11.5-foot power cord along the edges of your vehicle's interior, such as under the dashboard, along the A-pillar, and across the headliner. Use cable clips (not included) if necessary to secure the cable and prevent it from obstructing your view or vehicle controls.
Image: An illustration demonstrating the recommended cable routing path from the dash camera, along the windshield and A-pillar, down to the car's power outlet.
- Bi Çavkaniya Hêzê ve Giredin: Plug the USB Type-A end of the power cord into a compatible USB power adapter (e.g., a car charger or USB port) in your vehicle.
Image: A close-up of the USB-A connector inserted into a car charger, indicating the power input connection.
- Hêza piştrast bikin: Once connected, your dash camera should power on, indicating a successful connection.
Telîmatên Operating
This power cord operates on a simple plug-and-play principle. Once properly connected to a power source and your dash camera, it will continuously supply power, allowing your dash camera to function as intended. No additional configuration is required for the power cord itself.
Remember: This cable is exclusively for power. It cannot be used to transfer files, update firmware, or perform any data-related functions between your dash camera and another device.
Lênerrînî
- Keep the cable clean and free from dust and debris.
- Avoid sharp bends or kinks in the cable, as this can damage the internal wires.
- Do not pull on the cable itself when disconnecting; always grasp the connector housing.
- Store the cable in a cool, dry place when not in use.
Çareserkirina pirsgirêkan
| Pirsegirêk | Sedema gengaz | Çare |
|---|---|---|
| Dash camera does not power on. |
|
|
| Cable is too short for desired routing. | Incorrect length assessment. | The 11.5ft length is fixed. Plan routing carefully or consider alternative power solutions if this length is insufficient. |
Specifications
- Nîşan: REDTIGER
- Cins: 11.5Ft
- Tîpa girêdanê: USB Type-C (male) to USB Type-A (male)
- Cable Cable: Kabloya Hêza USB
- Dirêjî: 11.5 ling (nêzîkî 3.5 metre)
- Karkirin: Power Only (No Data Transfer)
- Amûrên Lihevhatî: REDTIGER series dash cameras
- Reng: Reş
- Taybetmendiya Taybet: Lightweight, Durable Design
Garantî û Piştgirî
REDTIGER provides an 18-month assurance service for this power cord, ensuring it meets your expectations and remains in top condition.
For any questions, technical assistance, or warranty claims, please contact REDTIGER customer support.
- Balkeş bûn: Available 24/7 via Email or Phone.
- Siyaseta Vegerê: 7-day return policy and return on defects.
Image: Icons representing REDTIGER's customer support channels: 24-hour service, email, and phone support.