Sanus WSSE12-W2

Sanus Fixed Height Speaker Stands for Sonos Era 100

Model: WSSE12-W2

Pêşkêş

This manual provides comprehensive instructions for the assembly, installation, and maintenance of your Sanus Fixed Height Speaker Stands, specifically designed for the Sonos Era 100 wireless speaker. Please read all instructions carefully before beginning installation to ensure proper setup and safe operation.

Agahiyên Ewlekariyê

Always follow basic safety precautions when installing and using this product. Keep small parts away from children. Ensure all connections are secure before placing the speaker on the stand. Do not exceed the recommended weight capacity for the speaker stand.

Naveroka pakêtê

Verify that all components are present before assembly. If any parts are missing or damaged, contact Sanus customer support.

  • Speaker Stand Post (2)
  • Plaqeya bingehîn (2)
  • Speaker Platform (2)
  • Mounting Hardware for Sonos Era 100
  • Lingên gomî (8)
  • Height-Adjustable Carpet Spikes (8)
  • Assembly Tool (e.g., Phillips screwdriver)

Sazkirin û Sazkirin

Follow these steps to assemble and install your speaker stands.

  1. Attach Base Plate to Stand Post: Securely fasten the base plate to the bottom of the stand post using the provided screws and assembly tool. Ensure the connection is tight and stable.
  2. Install Floor Protection: Depending on your flooring, attach either the rubber feet for hard surfaces or the height-adjustable carpet spikes for carpeted areas to the underside of the base plate. Adjust spikes as needed for leveling.
  3. Route Speaker Cable: Before attaching the speaker platform, carefully route the Sonos Era 100 power cable and any other necessary cables through the oversized post of the speaker stand. This integrated cable management system helps maintain a clean and organized appearance.
  4. Attach Speaker Platform: Secure the speaker platform to the top of the stand post using the designated screws.
  5. Mount Sonos Era 100 Speaker: Place your Sonos Era 100 speaker onto the speaker platform. Use the included hardware to securely attach the speaker to the stand, ensuring it is stable and centered.
Sanus Fixed Height Speaker Stand with Sonos Era 100 speaker, showing dimensions of 34.4 inches height, 10 inches width, and 12.7 inches depth.
Image: Sanus Fixed Height Speaker Stand with Sonos Era 100 speaker, illustrating overall dimensions and a 5-year limited warranty badge.
Close-up of speaker stand bases showing options for rubber feet and height-adjustable carpet spikes.
Image: Detail of the stand bases, highlighting the inclusion of both rubber feet and height-adjustable carpet spikes for various floor types.

Telîmatên Operating

These speaker stands are designed to position your Sonos Era 100 speakers at an optimal listening height for an enhanced audio experience.

  • Cihkirin: Position the speaker stands in your desired listening area, ensuring they are on a stable, level surface.
  • Guhdarîkirina Herî Baş: The fixed height of 34.4 inches (87.4 cm) is engineered to provide an ideal acoustic experience for most seating arrangements.
Sanus speaker stand with Sonos Era 100 speaker, emphasizing 'Optimal Listening Height'.
Image: The speaker stand with a Sonos Era 100 speaker, illustrating its optimal listening height.
Close-up of the speaker stand top, showing how it seamlessly integrates with the Sonos Era 100 speaker.
Wêne: Nêzîkbûn view demonstrating the seamless integration of the speaker stand with the Sonos Era 100 speaker.

Lênerrînî

Ji bo ku hûn temendirêj û xuyangê stûnên axaftvanên xwe misoger bikin, van rêbernameyên lênêrînê yên hêsan bişopînin:

  • Paqijî: Wipe the stands with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp qumaşê bi sabûneke nerm bişon, paşê baş hişk bikin. Ji paqijkerên aşınker an çareserkeran dûr bisekinin.
  • Berçavderbasî: Hemû pêç û girêdan bi awayekî periyodîk kontrol bikin da ku ew saxlem û bi ewlehî bimînin.

Çareserkirina pirsgirêkan

PirsegirêkSedema gengazÇare
Sekin lerzok an jî nearam e.Girêdanên sist; zemînek nehevseng.Tighten all screws. If on carpet, adjust height-adjustable spikes until stable. If on hard floor, ensure rubber feet are properly installed and the surface is level.
Speaker does not fit securely.Incorrect speaker model; improper mounting.Ensure you are using a Sonos Era 100 speaker. Re-check mounting hardware and instructions to ensure correct attachment.
Cables are visible or messy.Cables not routed through the post.Disassemble the top portion of the stand and re-route cables through the integrated cable management channel in the stand post.

Specifications

  • Hejmara Model: WSSE12-W2
  • Lihevhatî: Sonos Era 100 Wireless Speaker
  • Mal: Alloy Steel
  • Reng: Spî
  • Pîvanên hilberê (L x W x H): 12.7" x 10" x 34.4" (32.2 cm x 25.4 cm x 87.4 cm)
  • Giraniya Babetê: 17.11 pound (7.78 kg)
  • Optimal Listening Height: 34.4 înç (87.4 cm)
  • Rêveberiya Cable: Integrated through-post design
  • Floor Compatibility: Includes rubber feet for hard floors and height-adjustable carpet spikes for carpeted surfaces.

Agahî Garantî

Sanus pêşkêş dike 5-Sal Garantiya Limited for these speaker stands. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the official Sanus webmalper an bi piştgiriya xerîdar re têkilî daynin.

Alîkarî

For further assistance, technical support, or to inquire about replacement parts, please visit the official Sanus website or contact their customer service department. You can find contact information on the Sanus webmalper: www.sanus.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.