Perlegear Full Motion TV Wall Mount for 37-85 inch TVs, Model PGLF4

1. Destpêk

Thank you for choosing the Perlegear Full Motion TV Wall Mount, Model PGLF4. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read these instructions thoroughly before beginning installation and keep them for future reference.

2. Agahiyên Ewlekariyê

WARNING: Failure to read and follow these instructions may result in personal injury, property damage, or voiding your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support or a qualified installer.

• This product is designed for installation on 12"/16" wood studs, solid concrete, or concrete block walls. Li ser dîwarê hişk tenê saz nekin.
• Ensure the wall structure can safely support the combined weight of the mount and your TV. The maximum weight capacity for this mount is 132 lbs (60 kg).
• Verify your TV's VESA pattern and weight are within the specified limits before installation.
• Use only the mounting hardware provided. If any parts are missing or defective, contact Perlegear customer service.
• Ji bo dîtina rast a stûnên daran, her tim amûrek dîtina stûnan bikar bînin.
• Do not overtighten screws, as this may cause damage and reduce the mount's stability.
• Di dema sazkirinê de zarokan dûr bixin.

3. Naveroka pakêtê

Please check to ensure all components are included and undamaged:

• Komkirina Plaqeya Dîwar bi Milên Mîhengkirî
• Çengên TV-yê (2 parçe)
• Kîta Amûrên Montajkirinê (cûrbecûr vîs, şûşe, spacer ji bo TV û dîwar)
• Asta Bubble
• Drablon Drilling
• Cable Ties (Velcro straps)
• Manual Instruction

4. Taybetmendiyên Hilberê

• Avakirina Giran: Made from robust alloy steel, designed to securely hold TVs up to 132 lbs.
• Wide TV Compatibility: Supports most 37-85 inch flat or curved TVs.
• Lihevhatina VESA: Lihevhatî bi şablonên VESA re ji 200x100mm heta 600x400mm.
• Full Motion Adjustments:
  • Tool-Free Tilt: Adjust your TV 15° forward and 5° backward to reduce glare and optimize viewing.
  • Swivel: Swivel your TV up to 45° left or right for flexible viewing angles.
  • Dirêjkirin û Vekişandin: Extends up to 16.9 inches (43 cm) from the wall for immersive viewing and retracts to a slim 2.72 inches (6.9 cm) for a clean profile.
• Stabiliya zêdekirî: Features durable articulating arms, anti-drop end caps, and security locks to keep your TV safely in place.
• Asta Piştî Sazkirinê: Allows for a ±3° leveling adjustment after mounting to ensure a perfectly level screen.

5. Compatibility

Before installation, ensure your TV meets the following criteria:

• Mezinahiya TV: Fits most 37-85 inch TVs.
• Giraniya TV: Your TV must weigh no more than 132 lbs (60 kg).
• Nimûneya VESA: The mounting holes on the back of your TV must match one of the following VESA patterns: 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 500x400mm, 600x400mm.
• Cureyê Dîwar: Suitable for 12"/16" wood stud walls, solid concrete walls, or concrete block walls. Li ser dîwarê hişk tenê saz nekin.

This image illustrates the wide compatibility of the mount, supporting TVs from 37 to 85 inches and various VESA patterns.

This diagram shows the supported wall types for installation: concrete, block walls, and 12-inch or 16-inch wood studs. It explicitly warns against mounting on drywall only.

6. Sazkirin û Sazkirin

Follow these general steps for installation. Refer to the detailed instructions provided in your package for specific diagrams and hardware usage.

6.1 Kontrola Pêş-Sazkirinê

• Ensure you have all necessary tools (e.g., drill, stud finder, screwdriver, pencil).
• Confirm your TV and wall meet the compatibility requirements.
• Have a helper available, especially for lifting the TV.

6.2 Gavên Sazkirinê

1. Attach TV Brackets to Your TV: Secure the vertical TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure they are centered and securely fastened.
2. Mount the Wall Plate Assembly:
   • Use a stud finder to locate the center of your wood studs or mark the desired position on concrete/block walls.
   • Position the drilling template on the wall at your desired height and mark the pilot hole locations.
   • Drill pilot holes according to the instructions for your wall type.
   • Attach the wall plate assembly to the wall using the provided lag bolts and washers. Ensure it is level and securely tightened.
3. Televîzyona xwe daliqîne: Carefully lift your TV (with attached brackets) and hook the brackets onto the wall plate assembly. Engage the security locks to prevent accidental dislodgement.

This image shows the use of the handy drilling template to mark precise locations for mounting screws on the wall, simplifying the installation process.

This image displays the Perlegear TV wall mount securely installed on a wall, highlighting its maximum weight capacity of 132 lbs.

7. Telîmatên Operating

Once installed, your Perlegear PGLF4 mount allows for various adjustments to achieve optimal viewing.

• Veguheztina Tilt: The mount features tool-free tilt. Locate the tilt adjustment levers on the TV brackets. Loosen them to adjust the TV's vertical angle (15° forward, 5° backward), then tighten to secure.
• Veguheztina zivirî: Gently push or pull the TV to swivel it left or right (up to 45° in each direction) along the articulating arms.
• Dirêjkirin û Vekişandin: Extend the TV out from the wall by pulling it forward (up to 16.9 inches) or push it back towards the wall to retract (to 2.72 inches).
• Asta Piştî Sazkirinê: If your TV appears slightly unlevel after installation, use the ±3° leveling adjustment feature to fine-tune its horizontal position. Refer to your detailed manual for specific instructions on how to access and use this feature.

This image demonstrates the mount's ability to tilt the TV +5° to -15° and swivel ±45°, providing the best view from any seat.

This image shows a hand utilizing the tool-free tilt mechanism, allowing for easy adjustment of the TV's vertical angle without additional tools.

This image illustrates the mount's extension capability, allowing the TV to be pulled out 16.9 inches from the wall and retracted to a compact 2.72 inches.

8. Maintenance

Parastina birêkûpêk temenê dirêj û xebitandina ewle ya çembera dîwar a TV-ya we misoger dike.

• Paqijî: Ji bo rakirina tozê, montajê bi qumaşê nerm û hişk paqij bikin. Paqijker an çareserkerên aşınker bikar neynin.
• Têkiliyan kontrol bikin: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary, but do not overtighten.
• Ji bo zirarê kontrol bikin: Regularly inspect the mount for any signs of wear, damage, or corrosion. If any issues are found, discontinue use and contact customer support.

9. Destpêkirin

If you encounter any issues during or after installation, refer to the following common solutions:

• TV Ne Ast e: Use the post-installation leveling adjustment feature (±3°) to correct the TV's horizontal alignment.
• Difficulty Moving/Adjusting TV: Ensure all adjustment levers and bolts are sufficiently loosened before attempting to move the TV. If the mount feels stiff, check for any obstructions or overtightened components.
• Mount Feels Unstable: Recheck all wall and TV connections. Ensure lag bolts are securely fastened into studs or appropriate anchors in concrete. Verify the TV's weight does not exceed the mount's capacity.
• Parçeyên Wenda: If any parts are missing from your package, contact Perlegear customer support immediately.

10. Specifications

11. Garantî û Piştgirî

Perlegear provides a limited warranty for this product. For detailed warranty information, please refer to the warranty card included in your package or visit the official Perlegear website.

Should you have any issues or questions, please do not hesitate to contact us:

• DYA/CA: 1-800-456-5231 (Mon-Fri, 8am-8pm CST)
• UK/DE: 44-808-196-4165 (Mon-Fri, 2pm-10pm UTC)
• Email: support@perlegear.com
• Webmalper: www.perlegear.com