1. Destpêk
This manual provides detailed instructions for the assembly, operation, and maintenance of your ROBOTIME Swing Ride EA02 3D Wooden Puzzle Music Box. This kit combines the challenge of a 3D puzzle with the charm of a music box, featuring LED lights and mechanical movement. Please read all instructions carefully before beginning assembly.
Figure 1: The fully assembled ROBOTIME Swing Ride EA02.
2. Agahiyên Ewlekariyê
- Hişyariya Parçeyên Biçûk: This kit contains small parts which may pose a choking hazard for children under 3 years old. Keep all components out of reach of young children.
- Kevirên tûj: Some laser-cut wooden pieces may have slightly sharp edges. Handle with care during assembly.
- Ewlehiya Pîl: This product requires 3 AAA batteries (not included). Ensure correct polarity when inserting batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the product is not used for an extended period.
- Pêşniyara Temen: This model kit is recommended for individuals aged 14 years and older due to its complexity and small components.
3. Naveroka pakêtê
Before starting assembly, verify that all components listed below are present in your package. Refer to the included instruction booklet for a detailed parts list and diagrams.
- Pre-cut wooden sheets (289 pieces)
- Music box mechanism
- LED light components
- Pirtûka rênîşandana wênekirî
- Small accessories (e.g., wires, screws, lubricant)
Not: 3 AAA batteries are required for operation and are ne tê de in the package due to shipping regulations. Please prepare these separately.
Figure 2: All components included in the ROBOTIME Swing Ride EA02 kit.
4. Talîmatên Civînê
The ROBOTIME Swing Ride EA02 is designed for self-assembly. Follow the detailed, step-by-step illustrated instructions provided in your kit. Each wooden piece is laser-cut and numbered for easy identification.
- Amadekarî: Clear a clean, well-lit workspace. Organize the wooden sheets and identify the numbered pieces.
- Detaching Pieces: Carefully detach each piece from its wooden sheet. Use a craft knife or sandpaper if necessary to smooth any rough edges.
- Talîmatan bişopînin: Assemble the model strictly according to the sequence shown in the instruction manual. Pay close attention to the diagrams and ensure all connections are secure.
- Parçeyên Mekanîkî: When assembling gears and moving parts, ensure they fit smoothly. Apply the provided lubricant sparingly to designated areas as indicated in the manual to ensure optimal movement.
- Pêkhateyên Elektrîkê: Install the LED lights and music box mechanism as directed. Ensure all wires are connected correctly.
Patience and attention to detail are key for a successful build. The estimated assembly time is approximately 6 hours.
Figure 3: Illustrates the DIY assembly process and mechanical gear transmission.
Wêne 4: Berfireh view of the internal gear mechanism and elastic induction thimble.
5. Telîmatên Operating
Once fully assembled, your Swing Ride EA02 model can be operated as follows:
- Sazkirina Pîlê: Open the battery compartment (usually located at the base) and insert 3 AAA batteries, ensuring correct polarity.
- Power On / Off: Locate the touch switch, typically integrated into the base of the model. A gentle touch will activate the music, lights, and rotation. Touch again to turn off.
- Taybetmendî: When activated, the model will play the melody "Merry Go Round." The hollowing chairs will rotate, exhibiting a counter-rotating and centrifugal motion, while the LED lights illuminate the structure, creating a dynamic amusement park atmosphere.
Figure 5: Key operational components including hollowing chairs and power supply.
Vîdyoya Fermî ya Berhemê
Video 1: This video demonstrates the ROBOTIME 3D Puzzles DIY Music Box Kit Swing Ride in operation, showcasing its rotating chairs, lights, and music.
6. Maintenance
- Paqijî: Use a soft, dry cloth to gently wipe dust from the model. Avoid using wet cloths or harsh cleaning agents, as these can damage the wood or electronic components.
- Embarkirinî: Store the assembled model in a dry, cool place away from direct sunlight and excessive humidity to prevent warping or damage to the wooden pieces.
- Guhertina Pîl: Replace batteries when the lights dim or the music/motion becomes weak. Always replace all batteries at once.
7. Destpêkirin
| Pirsegirêk | Sedema gengaz | Çare |
|---|---|---|
| Ronahî an muzîk kar nakin | Dead or incorrectly installed batteries; loose wire connection. | Check battery polarity and replace if necessary. Inspect wire connections for tightness. |
| Rotation is sluggish or stops | Insufficient lubrication; obstruction in gears; low battery power. | Apply lubricant to gears as per assembly instructions. Check for any foreign objects. Replace batteries. |
| Parçe li hev nayên | Incorrect piece orientation; burrs on edges. | Refer to the instruction manual diagrams. Gently sand edges if needed. Do not force pieces. |
Eger hûn rastî pirsgirêkên ku li vir nehatine navnîş kirin werin, an jî çareserî pirsgirêkê çareser nekin, ji kerema xwe bi piştgiriya xerîdar re têkilî daynin.
8. Specifications
- Nîşan: ROBOTIME
- Cins: EA02 (Swing Ride)
- Mal: Dar, Plastîk
- Hejmara Parçeyan: 289
- Assembled Dimensions (L x W x H): Nêzîkî 5.9 x 5.9 x 10.6 înç (15 x 15 x 27 cm)
- Giraniya Babetê: 0.74 Kîlo
- Asta Pisporiyê: Di nav
- Armanca Perwerdehiyê: Concentration Skill, Patience Skill, Problem Solving Skill
- Çavkaniya hêzê: 3 x Batteries AAA (ne tê de)
Figure 6: Dimensions and piece count of the ROBOTIME Swing Ride EA02.
9. Garantî û Piştgirî
ROBOTIME products are manufactured with quality and precision. If you encounter any issues with your Swing Ride EA02 kit, such as missing or broken parts, or require assistance with assembly or operation, please contact ROBOTIME customer service. Refer to the contact information provided in your product packaging or visit the official ROBOTIME webmalpera ji bo piştgirî.