TM617 Digital Time Switch User Manual

1. Destpêk

This user manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER TM617 Digital Time Switch. The TM617 is a weekly programmable electronic timer designed for controlling electrical appliances with precision, offering a large LCD display for clear visibility.

Please read this manual thoroughly before using the device to ensure proper function and safety.

Wêne 1: Pêşî view of the TM617 Digital Time Switch.

2. Agahiyên Ewlekariyê

• Ji bo rêgirtina li şoka elektrîkê, berî sazkirin an tamîrkirinê, piştrast bikin ku dabînkirina elektrîkê qut bûye.
• This device should be installed by a qualified electrician in accordance with local electrical codes.
• Amûrê li ber şilbûn, germahiyên zêde, an jîngehên korozîf nehêlin.
• Do not disassemble or modify the device. Any unauthorized modifications will void the warranty.
• Verast bikin voltage rating of the device (110V/220V) matches your power supply before connection.

3. Taybetmendiyên Hilberê

• Large LCD display for clear and easy reading.
• Weekly programmable with up to 16 ON/OFF settings per day.
• Built-in rechargeable battery for memory backup when power is off.
• High accuracy and strong anti-interference capability.
• Manual override function.
• Suitable for controlling street lights, neon lights, advertising signs, production equipment, broadcast television, and other power loads.

4. Naveroka pakêtê

Ji kerema xwe dema vekirinê naveroka pakêtê kontrol bikin:

• 1 x SINOTIMER TM617 Digital Time Switch
• 1 x Rêbernameya Bikarhêner (ev belge)
• Mounting Screws (if included with your specific model)

Figure 2: TM617 with protective cover open and mounting screws.

5. Sazkirin û Sazkirin

5.1 Çêkirin

The TM617 can be mounted on a wall or panel. Ensure a stable surface and adequate ventilation. Refer to the dimensional diagram for precise measurements.

Figure 3: TM617 Dimensional and Installation Diagram.

5.2 Diagrama Têlkirinê

Connect the power supply and load according to the wiring diagram provided on the device or in the detailed product specifications. Ensure all connections are secure and insulated. Incorrect wiring can damage the device or cause electrical hazards.

• Hêza Input: Connect the 110V/220V AC power supply to the designated input terminals.
• Derana Barkirinê: Connect the appliance or load to be controlled to the output terminals.

Note: The internal battery charges when the device is connected to power. Allow several hours for the battery to fully charge before initial programming if the device has been stored for a long period.

6. Telîmatên Operating

6.1 Fonksiyon Bişkojk

• P (Bername): Enters or exits programming mode.
• D+ (Day): Adjusts day of the week in setting mode; selects day in program mode.
• H+ (Hour): Adjusts hour in setting mode; selects hour in program mode.
• M+ (Minute): Adjusts minute in setting mode; selects minute in program mode.
• C/R (Cancel/Recall): Resets current setting; recalls programs.
• Clock Icon (Set Time): Press to enter time setting mode.
• Manual Override Button (Hand Icon): Toggles between ON/AUTO/OFF modes.

Figure 4: TM617 Buttons and Display.

6.2 Danîna Dem û Roja Niha

1. Bişkojk û bigire Ockkona Saetê pişkov.
2. Dema ku digire Ockkona Saetê, çapemeniyê D+ to set the current day of the week (MO, TU, WE, TH, FR, SA, SU).
3. Dema ku digire Ockkona Saetê, çapemeniyê H+ ji bo danîna saeta heyî.
4. Dema ku digire Ockkona Saetê, çapemeniyê M+ ji bo danîna deqeya niha.
5. Serbest berdan Ockkona Saetê bişkojka ku mîhengan hilîne.

6.3 Bernamekirina Çerxên VEKIRIN/GIRTINÊ

The TM617 supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.

1. Bitikîne P carekê bişkojkê. Li ser ekranê dê "1 ON" (1 ON) nîşan bide.
2. Rojnamevanî D+ to select the day(s) for the first ON program (e.g., MO, TU, WE, TH, FR, SA, SU, or specific combinations).
3. Rojnamevanî H+ to set the hour for the first ON program.
4. Rojnamevanî M+ to set the minute for the first ON program.
5. Bitikîne P button again. The display will show "1 OFF".
6. Repeat steps 2-4 to set the day(s), hour, and minute for the first OFF program.
7. Bi zextê berdewam bikin P to cycle through "2 ON", "2 OFF", up to "16 ON", "16 OFF", setting each program as needed.
8. Piştî sazkirina hemî bernameyên xwestî, li ser bişkoja Ockkona Saetê button to exit programming mode and return to the current time display.

To clear a specific program, press C/R when that program is displayed in programming mode.

6.4 Destnîşana Destûrî

The manual override button (hand icon) allows you to temporarily or permanently change the output state without affecting programmed settings.

• Bitikîne Manual Override bişkojka ku di modan re derbas dibe:
• LI: Output is continuously ON, ignoring programs.
• TRIMBÊL: Output follows programmed ON/OFF cycles.
• JI: Output is continuously OFF, ignoring programs.
• Neqandin AUTO for normal operation based on your programmed schedule.

7. Maintenance

• Clean the device regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the device is kept free from dust and debris to maintain proper ventilation.
• The internal battery is designed for long life and typically does not require replacement. If the display becomes dim or settings are lost frequently, the battery may need servicing by a qualified technician.

8. Destpêkirin

9. Specifications

10. Garantî û Piştgirî

SINOTIMER products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact your original retailer or the SINOTIMER customer service department. Please have your product model number (TM617) and purchase date available when contacting support.

For the most up-to-date information, please visit the official SINOTIMER webmalperê an jî li pakêta hilberê binêrin.