1. Agahiyên Ewlekariyê
Ji kerema xwe berî sazkirin û xebitandinê hemû rêwerzên ewlehiyê bi baldarî bixwînin. Neşopandina van rêwerzan dibe ku bibe sedema şoka elektrîkê, agir, an birîndarîyên din.
- Hêzê qut bikin: Always disconnect power at the circuit breaker or fuse box before installing, servicing, or removing the switch.
- Elektrîkê jêhatî: Sazkirin divê ji hêla elektrîkçîyekî pispor ve li gorî hemî kodên elektrîkê yên herêmî û neteweyî were kirin.
- Voltage: Volê xebitandinê piştrast bikintage of your electrical system matches the switch's specifications (250V).
- Têlkirin: Verify all wire connections are secure and correctly identified (Live, Neutral, Load).
- Dor: Li şil an d saz nekinamp locations. This product is rated IP65 for protection against dust and low-pressure water jets, but it is not submersible.
- Zarok: Materyalên pakkirinê û perçeyên piçûk ji zarokan dûr bigirin.
2. Hilbera Serîview
The CNBINGO Double Rocker Switch (Model M1-P105) is designed for controlling lighting circuits from one or two locations. It features a modern crystal glass panel and phosphorescent dots for visibility in low light.
2.1 Components
Wêne: Teqîn kirin view showing the luxury crystal glass panel, integrated security module, and metal frame of the switch.
- Luxury Crystal Glass Panel: Provides a modern aesthetic and is easy to clean.
- Integrated Security Module: Houses the electrical components and ensures safe operation.
- Çarçoveya Metal: Provides structural support and facilitates secure mounting.
2.2 Taybetmendiyên sereke
- Phosphorescent Dots: Three green dots on each rocker glow faintly in the dark after absorbing light, aiding visibility without disturbing sleep.
- Two-Way Control: Can be used as a two-way switch or a 1-pole ON/OFF switch to control lights from one or two locations.
- Avakirina Dorable: Features a fire-protective PC plate, glass panel, and modular housing. Internal components use fluorescent copper and metal for extended lifespan (up to 25 years).
- Mezinahiya Standard: Designed to fit standard 86 x 86mm flush-mounted boxes with a 21mm mounting depth.
3. Specifications
| Nîşan | CNBINGO |
| Hejmara Model | M1-P105 |
| Mezinahiyên hilberê (L x W x H) | 8.6 x 8.6 x 3 cm |
| Babetê Weight | 180 gram |
| Mode Operating | ON-OFF |
| Rêjeya Niha | 10 A |
| Operating Voltage | 250 Volt |
| Tîpa Têkilî | Normal Girtî |
| Type Connector | Badan |
| Switch Type | Rocker |
| Rawesta paşîn | Badan |
| Mal | Polycarbonate |
| Circuit Type | 2-rê |
| Mounting Type | Indoor Mounting |
| Type Actuator | Push Button |
| Hejmara Positions | 2 |
| Rêbaza Kontrolê | Push Button |
| Protokola Girêdanê | Wi-Fi, RF433 (Note: This specific model M1-P105 is a mechanical rocker switch, not Wi-Fi/RF433 enabled. This specification might refer to other CNBINGO products.) |
| Reng | Spî |
| Material Têkilî | Sifir |
| Rêjeya Parastina Navneteweyî | IP65 |
4. Sazkirin
4.1 Berî Sazkirinê
- Ensure the power supply to the circuit is completely OFF at the main breaker.
- Confirm you have all necessary tools (screwdriver, wire strippers, voltage tester).
- Verify the existing wall box is suitable for the switch dimensions.
4.2 Pîvana Mounting
Wêne: Standard dimensions of the switch, indicating it fits standard flush-mounted boxes (86x86mm with 21mm mounting depth).
The switch is designed for standard flush-mounted boxes. The front panel measures 86mm x 86mm, and the module requires a mounting depth of 21mm.
4.3 Diagrama Têlkirinê
Wêne: Wiring diagram illustrating connections for a double rocker switch in both 1-way and 2-way configurations. Blue indicates Neutral, Red indicates Live, and Black indicates Load wires to the lights.
The switch supports both 1-way (single location control) and 2-way (multiple location control) wiring. Refer to the diagram for correct connections.
- Live Wire (L): Connect the incoming live wire to the 'L' terminal.
- Load Wires (L1, L2): Connect the load wires going to your light fixtures to the 'L1' and 'L2' terminals for each respective switch.
- Two-Way Wiring (L1, L2, L3): For 2-way control, connect the common live wire to 'L' and the two traveler wires between the switches to 'L1' and 'L2' (or 'L1' and 'L3' depending on the specific terminal layout). Consult a qualified electrician if unsure.
Wêne: Mezinkirin view of the switch, detailing the screw terminals for electrical connections.
4.4 Gavên Sazkirinê
- Hêzdarkirin: Piştrast bike ku dabînkirina elektrîkê ya sereke vemirî ye.
- Guhestina Kevin Rake: Bi baldarî guhêrbarê heyî ji qutiya dîwêr derxînin.
- Têkiliyên Têl: Connect the wires to the appropriate terminals on the CNBINGO switch as per the wiring diagram. Ensure all connections are tight.
- Guhêrbarê Çiyayê: Gently push the switch module into the wall box. Secure it using the provided screws.
- Attach Glass Panel: Snap the crystal glass panel onto the switch module. The design is screwless for a clean finish.
- Vejandina Hêzê: Çavkaniya elektrîkê ya sereke dîsa vekin.
- Îmtîhan: Test the functionality of the switch.
5. Telîmatên Operating
5.1 Operasyona bingehîn
To operate the switch, simply press the top or bottom of the rocker panel to toggle the connected light fixture ON or OFF. Each rocker controls an independent circuit.
Wêne: The CNBINGO Double Rocker Switch seamlessly integrated into various room settings, highlighting its modern design and ease of use.
5.2 Fluorescent Dots
The three green dots on each rocker are phosphorescent. They absorb ambient light during the day and glow faintly in the dark, making the switch visible at night without being overly bright or disruptive to sleep.
Wêne: Side profile of the switch, showcasing the elegant crystal glass panel and the subtle phosphorescent dots.
5.3 Kontrola Du-Alî
If wired for two-way control, the switch can be used in conjunction with another two-way switch to control a single light fixture from two different locations (e.g., at the top and bottom of a staircase).
6. Maintenance
- Paqijî: The crystal glass panel can be cleaned with a soft, damp çît. Ji paqijkerên abrasive an kîmyewiyên hişk ên ku dibe ku zirarê bidin qedandinê dûr bikin.
- Berçavderbasî: Periodically inspect the switch for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
- Parçeyên Xizmetkar ên Bikarhêner tune: Do not attempt to disassemble the switch module. There are no user-serviceable parts inside.
7. Destpêkirin
| Pirsegirêk | Sedema gengaz | Çare |
|---|---|---|
| Light does not turn ON/OFF. | No power to the switch; Loose wiring connection; Faulty light bulb; Incorrect wiring. | Check circuit breaker; Ensure all wires are securely connected; Replace light bulb; Verify wiring against diagram, consult electrician if needed. |
| Switch feels loose in the wall. | Pêçên montajê ne teng in. | Turn off power, then tighten mounting screws. |
| Phosphorescent dots do not glow. | Insufficient exposure to light. | Ensure the switch is exposed to ambient light during the day to charge the phosphorescent material. |
| Switch dengek ziravê derdixe. | Loose connection; Incompatible load (rare for mechanical switches). | Turn off power and check all wiring connections. If the issue persists, consult a qualified electrician. |
8. Garantî û Piştgirî
CNBINGO switches are manufactured with high-quality materials and are designed for a long operational life, up to 25 years under normal use conditions.
For technical support or warranty inquiries, please contact your retailer or visit the official CNBINGO website. Please have your model number (M1-P105) and purchase details ready.