1. Destpêk
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your JIAYIN JYPC-7A Solenoid Water Pump. Please read it thoroughly before installation and use to ensure proper function and longevity of the product. Retain this manual for future reference.
2. Agahiyên Ewlekariyê
Always observe the following safety precautions to prevent injury or damage to the pump:
- Ewlehiya Elektrîkê: Piştrast bike ku dabînkirina hêzê bi kapasîteya pompê re li hev dike.tage (AC 100-120V, 60Hz). Disconnect power before any installation, maintenance, or troubleshooting. All electrical connections should be performed by a qualified professional.
- Lihevhatina Liquid: This pump is designed for water or non-corrosive liquids only. Using corrosive liquids may damage the pump and void the warranty.
- Sînorên Germahiya: Do not exceed the specified working temperatures: ambient temperature (Ta) 70℃ / 158℉ and medium temperature (Tf) 60℃ / 140℉.
- Lêkirinî: Securely mount the pump to prevent vibration and movement. Ensure proper ventilation.
- Amûrên Parastina Kesane: Wear appropriate personal protective equipment (e.g., safety glasses, gloves) during installation and maintenance.
3. Hilbera Serîview
The JIAYIN JYPC-7A is an electromagnetic solenoid water pump designed for various applications requiring precise liquid transfer. It features a robust plastic construction and operates on AC 100-120V power.
jimar 3.1: Pêşde view of the JIAYIN JYPC-7A Solenoid Water Pump, showing the main body, inlet/outlet ports, and electrical connections.
Taybetmendiyên sereke:
- No rust, no clogging design.
- Operates on AC 100-120V, 60Hz, 60W.
- Flow rate of 2400 ±10% cc/min.
- Suitable for water or non-corrosive liquids.
- Designed for intermittent duty (ID2/1min).
jimar 3.2: Close-up view of the product label on the JIAYIN JYPC-7A pump, displaying model number, voltage, power, frequency, and working mode.
4. Specifications
Detailed technical specifications for the JIAYIN JYPC-7A Solenoid Water Pump:
| Specification | Giranî |
|---|---|
| Nîşan | JIAYIN |
| Cins | JYPC-7A |
| Awa | Water Solenoid Pump |
| Voltage | AC 100-120V |
| Pircarînî | 60Hz |
| Erk | 60W |
| Rêjeya herikînê | 2400 ±10% cc/min |
| Zexta Xebatê | 0-2 bar |
| Moda Xebatê | ID2/1min (Intermittent Duty) |
| Working Medium | Water or non-corrosive liquid |
| Germahiya hawirdorê (Ta) | Max 70℃ / 158℉ |
| Medium Temperature (Tf) | Max 60℃ / 140℉ |
| Mal | Pîlastîk |
| Weight Net | 423g / 14.9oz (approx. 15 ounces) |
| Mezinahiya Hilberê | 4.53 x 1.93 x 1.18 înç (115 x 49.6 x 30 mm) |
| Bilindahiya Hilkişîna herî zêde | 20 Santîmetre |
| Asta Deng | 45 Desîbel |
| Length Cord | 11.8 Inches |
jimar 4.1: Serview of pump dimensions and performance characteristics including flow/pressure, flow/time, and temperature rise/time graphs.
5. Sazkirin û Sazkirin
Follow these steps for proper installation of the JYPC-7A pump:
- Çêkirin: Securely mount the pump in a stable position. Refer to the dimensional drawings for mounting points and overall size.
- Têkiliyên ketin/derketinê: Connect the appropriate tubing to the pump's inlet and outlet ports. The flow direction is indicated on the pump's label (refer to Figure 3.2). For flow testing, a 17.7-inch silicon tube with an outer diameter of 0.4 inches and an inner diameter of 0.24 inches is typically connected to the water inlet port. Ensure all connections are tight to prevent leaks.
- Têkiliya Elektrîkê: Connect the pump to an AC 100-120V, 60Hz power source. Ensure the wiring is correct and secure. It is recommended to use appropriate connectors and insulate all exposed wires.
- Yekbûna pergalê: Integrate the pump into your system, ensuring that the liquid medium is non-corrosive and within the specified temperature limits.
jimar 5.1: Detailed dimensional drawing of the JIAYIN JYPC-7A pump, showing measurements for installation planning.
6. Operasyon
Once installed, the JIAYIN JYPC-7A pump operates by converting electrical energy into mechanical energy to move liquid. The pump is designed for intermittent duty (ID2/1min), meaning it should operate for a maximum of 2 minutes followed by a minimum of 1 minute rest to prevent overheating and ensure optimal performance and lifespan.
- Hêzdarkirin: Apply power to the pump. The pump will begin to draw and transfer liquid.
- Şopandin: Observe the flow rate and pressure to ensure it meets your application requirements.
- Duty Cycle: Adhere strictly to the ID2/1min duty cycle. Continuous operation beyond recommended limits can lead to premature failure.
- Asta Liquid: Ensure the liquid source does not run dry, as dry running can damage the pump. The pump is capable of drawing water from a height of 20cm within 10 seconds.
7. Maintenance
The JIAYIN JYPC-7A pump is designed for low maintenance, featuring materials that resist rust and clogging. However, regular checks can help ensure its continued reliable operation:
- Kontrola birêkûpêk: Periodically inspect the pump and connections for any signs of wear, leaks, or damage.
- Paqijbûnî: Ensure the pump and surrounding area are kept clean and free from debris that could obstruct airflow or clog the inlet/outlet.
- Liquid Quality: Always use clean, non-corrosive liquids to prevent internal damage and maintain performance.
- Embarkirinî: If storing the pump for an extended period, ensure it is drained of liquid and stored in a dry, temperate environment.
8. Destpêkirin
If you encounter issues with your JIAYIN JYPC-7A pump, refer to the following common problems and solutions:
| Pirsegirêk | Sedema gengaz | Çare |
|---|---|---|
| Pump dest pê nake | Ne dabînkirina hêzê Têlkirina çewt Xeletiya navxweyî | Girêdana elektrîkê û şkênera devreyê kontrol bikin Verify wiring against diagram Contact support if wiring is correct |
| Herikîna kêm an tune | Clogged inlet/outlet Di pergalê de hewa Insufficient liquid source Damaged impeller/valve | Teftîş bikin û her astengiyan paqij bikin Hewa ji pergalê birijîne Ensure adequate liquid supply Piştgiriya têkiliyê |
| Dengê/lerizîna zêde | Mounting Loose Di pergalê de hewa Astengiya navxweyî | Pêlên lêdanê hişk bikin Hewa ji pergalê birijîne Inspect for foreign objects (disconnect power first) |
| Germkirina pompê | Exceeding duty cycle High ambient/medium temperature Ventilasyona xirab | Adhere to ID2/1min duty cycle Ensure operating within specified temperature limits Improve ventilation around the pump |
Eger piştî van çareseriyan pirsgirêk berdewam bike, ji kerema xwe bi piştgiriya xerîdar re têkilî daynin.
9. Garantî û Piştgirî
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase. When contacting support, please have your product model (JYPC-7A) and purchase date available.