1. Destpêk
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Güde Airpower 275/8/50 Silent Compressor. Please read these instructions carefully before initial use and keep them for future reference. This compressor is designed for generating compressed air for various applications, including tire inflation and powering pneumatic tools.
The Güde Airpower 275/8/50 is an oil-free, twin-piston compressor with a 50-liter tank, operating at 230V. Its silent design ensures a low noise level during operation.
2. Agahiyên Ewlekariyê
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or damage to the equipment.
- Ewlehiya Elektrîkê: Ensure the compressor is connected to a properly grounded 230V power supply. Do not operate in wet conditions or with damaged cables.
- Ewlehiya zextê: Never exceed the maximum operating pressure of the compressor or the connected tools. Always wear appropriate eye protection.
- Perwanekirin: Ji bo rêgirtina li germbûna zêde, kompresorê li cîhekî baş hewakirî bixebitînin.
- Lênerrînî: Berî ku hûn her lênêrîn an tamîrkirinê bikin, dabînkirina elektrîkê qut bikin.
- Zarok û Kesên Ku Derbas Bûn: Keep children and unauthorized persons away from the operating compressor.
3. Setup û Meclîsa
Before operating the compressor, ensure all components are correctly assembled and inspected.
3.1 Vekirin û Teftîşkirin
Carefully remove the compressor from its packaging. Inspect for any signs of damage during transit. Report any damage to your supplier immediately.
3.2 Attaching Wheels and Handle
The compressor is equipped with wheels and a handle for portability. Attach the large wheels to the rear axle and the smaller swivel casters to the front support bracket. Secure the handle firmly to the main unit.
Figure 1: The Güde Airpower 275/8/50 Silent Compressor, showing the overall assembly with wheels and handle.
jimar 2: Paş view of the compressor, highlighting the sturdy handle and control panel with pressure gauges.
Wêne 3: Ji nêzîk ve view of the robust wheels, designed for easy movement of the compressor.
3.3 Girêdana Elektrîkê
Connect the compressor to a standard 230V, 50Hz electrical outlet. Ensure the circuit can handle the compressor's 1500W power consumption.
4. Telîmatên Operating
Follow these steps for safe and effective operation of your compressor.
4.1 Destpêkirina Kompresorê
- Ensure the main power switch is in the 'OFF' position.
- Kabloya elektrîkê têxin nav dergehek elektrîkê ya maqûl.
- Turn the main power switch to the 'ON' position. The compressor will start to build pressure in the tank.
- The compressor will automatically shut off once the maximum pressure is reached and restart when the pressure drops below a set threshold.
4.2 Adjusting Output Pressure
Use the pressure regulator knob located near the output quick-connect fitting to adjust the desired working pressure. The output pressure gauge will display the regulated pressure.
Figure 4: Detail of the twin-piston pump heads and air lines, showing the robust construction and connections.
4.3 Connecting Air Tools
Connect your pneumatic tools or accessories to the quick-connect fitting on the compressor. Ensure the connection is secure before operating the tool.
Figure 5: A user demonstrating tire inflation using the Güde Airpower compressor, highlighting its practical application.
4.4 Girtin
When finished, turn the main power switch to the 'OFF' position. Disconnect the power cord from the outlet. Release any remaining pressure from the tank by opening the drain valve or using an air tool until the pressure gauge reads zero.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your compressor.
5.1 Derxistina Kondensasyonê
Condensation will accumulate in the air tank. It is crucial to drain this moisture daily or after each use to prevent corrosion and maintain air quality. Locate the drain valve at the bottom of the tank, open it to release water, and then close it securely.
Figure 6: Close-up of the drain valve located at the bottom of the compressor tank, used for releasing condensed moisture.
5.2 Paqijkirin
Keep the compressor clean and free from dust and debris. Use a dry cloth to wipe down the exterior. Do not use solvents or abrasive cleaners.
5.3 Oil-Free Design
This compressor features an oil-free design, eliminating the need for oil changes or oil level checks. This simplifies maintenance and provides cleaner air output.
6. Destpêkirin
Ji bo pirsgirêkên hevpar û çareseriyên wan li tabloya jêrîn binêre.
| Pirsegirêk | Sedema gengaz | Çare |
|---|---|---|
| Kompresor dest pê nake | Ne dabînkirina hêzê Zêdebarbûna germî çalak bû | Girêdana hêz û dergehê kontrol bikin Allow compressor to cool down, then reset thermal overload switch (if present) |
| Zexta hilberîna kêm | Pressure regulator set too low Air leaks in connections | Eyar regulator zextê Check all hose connections and fittings for leaks |
| Kompresor bi berdewamî dixebite | Air leaks in tank or connections Çewtiya guherîna zextê | Inspect tank and connections for leaks Ji bo alîkariyê bi piştgiriya xerîdar re têkilî daynin |
| Dengê zêde an lerizîn | pêkhateyên Loose Yekîne li ser rûyekî sabît nîne | Hemî girêdanan kontrol bikin û teng bikin Place compressor on a firm, level surface |
7. Specifications
Key technical data for the Güde Airpower 275/8/50 Silent Compressor:
| Taybetî | Giranî |
|---|---|
| Hejmara Model | 50138 |
| Voltage | 230 Volt |
| Erk | 1500 Watts (1.5 Kilowatt) |
| Kapasîteya herikîna hewayê | 275 lître di deqîqê de |
| Kapasîteya Tank | 50 Litre |
| Asta Dengê (LPA) | 61 Desîbel |
| Pîvan (L x W x H) | 72 x 41.5 x 62.5 cm |
| Pîvan | 42.6 Kîlo |
| Taybetmendiya Taybet | Oil-free, Silent Operation |
Figure 7: Dimensional diagram of the compressor, indicating length, width, and height measurements.
Figure 8: A visual comparison of the compressor's 61 dB(A) noise level against other common sounds, illustrating its quiet operation.
8. Garantî
This Güde compressor is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation provided with your purchase or contact Güde customer support.
9. Piştgirî
For technical assistance, spare parts, or further inquiries regarding your Güde Airpower 275/8/50 Silent Compressor, please contact your authorized Güde dealer or visit the official Güde webmalper ji bo agahdariya têkiliyê ya karûbarê xerîdar.