Justfog Q16 Pro 900mAh Kit User Manual

Pêşkêş

This manual provides detailed instructions for the safe and effective use of your Justfog Q16 Pro 900mAh Kit. Please read this manual thoroughly before using the device to ensure optimal performance and safety.

Agahiyên Ewlekariyê

• Amûrê ji zarok û heywanên heywanan dûr bigirin.
• Amûrê li ber germahiyên zêde, tîrêjên rojê yên rasterast, an avê nehêlin.
• Use only the recommended charging cable and adapter.
• Amûrê ji hev dernexin û neguherînin.
• If you experience any unusual odors, overheating, or leakage, discontinue use immediately and contact support.

Naveroka pakêtê

The Justfog Q16 Pro Kit typically includes:

• 1x Justfog Q16 Pro Battery (900mAh)
• 1x Justfog Q16 Pro Clearomizer (1.9ml)
• 1x Coil (pre-installed or spare)
• 1x Kabîneya Qerara USB
• 1x Manual Bikarhêner

Product Overview

Wêne: The Justfog Q16 Pro Kit, featuring the battery mod and the clearomizer tank. The image displays four color variations: black, blue, pink, and silver. Each device consists of a rectangular battery base with a firing button and LED indicators, topped with a transparent clearomizer tank and a black drip tip. The clearomizer shows the internal coil structure.

The Justfog Q16 Pro is a compact and user-friendly electronic cigarette kit. It consists of two main parts: the battery mod and the clearomizer (tank).

• Battery Mod: Houses the 900mAh battery, firing button, and LED indicators for battery life and voltage mîhengên.
• Clearomizer (Tank): Holds up to 1.9ml of e-liquid and contains the replaceable coil. It features a top-fill design and adjustable airflow.

Damezirandin

1. Barkirina Pîl

1. Connect the small end of the USB charging cable to the charging port on the side of the Q16 Pro battery.
2. Connect the other end of the USB cable to a suitable USB power source (e.g., computer USB port, wall adapter).
3. The LED indicator lights will show the charging status. Once fully charged, the lights will indicate completion (refer to operating section for specific light patterns).

2. Installing/Replacing the Coil

1. Unscrew the clearomizer from the battery mod.
2. Invert the clearomizer and unscrew the base.
3. Carefully unscrew the old coil from the base.
4. Screw a new coil firmly into the clearomizer base.
5. Giring: Before first use, prime the coil by dripping a few drops of e-liquid onto the cotton wicking holes of the new coil.

3. Filling the Clearomizer

1. Ensure the clearomizer is detached from the battery.
2. Unscrew the top cap of the clearomizer.
3. Carefully fill the tank with e-liquid through one of the two filling ports, avoiding the central airflow tube. Do not overfill.
4. Qapaxa jorîn bi ewlehî dîsa bipêçin.
5. Giring: After filling a new coil, let the device stand upright for 5-10 minutes to allow the e-liquid to fully saturate the coil. This prevents dry hits and extends coil life.

4. Attaching the Clearomizer

1. Screw the filled clearomizer onto the Q16 Pro battery mod until finger-tight. Do not overtighten.

Telîmatên Operating

1. Power On / Off

• Ji bo zivirîna amûrê ON, press the firing button 5 times rapidly within 2 seconds. The LED lights will flash.
• Ji bo zivirîna amûrê JI, press the firing button 5 times rapidly within 2 seconds. The LED lights will flash.

2. Eyarkirina Voltage Derketin

The Q16 Pro offers 4 levels of voltage output. To adjust the voltage:

• voltage adjustment button (usually located below the firing button) to cycle through the voltage astên.
• Each press will change the voltage, indicated by the LED lights. Refer to the table below for voltage astên.

3. Vaping

Once the device is on and the tank is filled and primed:

• Place the drip tip in your mouth.
• Press and hold the firing button while inhaling. Release the button when you finish inhaling.
• The Q16 Pro supports both Mouth-to-Lung (MTL) and Direct-to-Lung (DL) vaping styles, depending on your preference and coil choice.

4. Nîşana Level Battery

The LED indicators on the battery mod also display the remaining battery life:

• 4 LED: 75-100%
• 3 LED: 50-75%
• 2 LED: 25-50%
• 1 LED: 0-25% (Recharge soon)

Lênerrînî

1. Cleaning the Clearomizer

• Regularly clean the clearomizer, especially when changing e-liquid flavors or if residue builds up.
• Disassemble the clearomizer (remove coil, top cap, and base).
• Rinse all parts (except the coil) with warm water. Allow them to air dry completely before reassembling.

2. Replacing the Coil

Coils are consumable parts and need to be replaced periodically, typically every 1-3 weeks depending on usage and e-liquid. Replace the coil if you notice a burnt taste, reduced vapor production, or diminished flavor. Follow the "Installing/Replacing the Coil" steps in the Setup section.

3. Lênêrîna Giştî

• Keep the device clean and dry. Wipe down the exterior with a soft, dry cloth.
• Piştrast bike ku porta şarjê ji toz û bermayiyan bêpar e.
• Dema ku nayê bikar anîn amûrê li cîhek sar û hişk hilînin.

Çareserkirina pirsgirêkan

Specifications

Garantî û Piştgirî

For warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official Justfog webmalper. Delîla kirîna xwe ji bo her îdîaya garantiyê biparêzin.

If you encounter issues not covered in this manual, please contact Justfog customer service for assistance.