1. Hilbera Serîview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Motora Kapasîteya Bilind: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Sêwirana Ergonomîk: Compact and ergonomic form for comfortable handling.
- Rêkxistina Parêzvanê Bê Amûr: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Telîmatên Ewlekariyê
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Ewlekariya Giştî
- Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and a dust mask.
- Piştrast bikin ku perçeya xebatê bi ewlehî cl eamped before operation.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Amûrê di atmosferên teqemenî de nexebitînin, wek mînak li ber hebûna şilekên şewatbar, gazan, an tozê.
- Dema ku amûrek elektrîkê dixebitînin zarok û temaşevanan dûr bixin.
Ewlekariya Elektrîkê
- Pêbaweriya dabînkirina hêzê piştrast bikintage matches the rating on the tool's nameplate.
- Kordê îstismar nekin. Tu carî têlê ji bo hilgirtin, kişandin an jêkirina amûrê hêzê bikar neynin. Têlê ji germ, rûn, keviyên tûj, an perçeyên livîn dûr bigirin.
- Ger di reklamê de amûrek hêzê bixebiteamp cîh neçar e, amûrek heyî ya bermayî (RCD) dabînkirina parastî bikar bînin.
Specific Angle Grinder Safety
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Pêkhate û Taybetmendî
Pêkhateyên sereke:
- Bedena sereke: Houses the motor, electronics, and gearbox.
- Parastina Parastinê: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Bişkojka Girtina Spindle: For easy disc changes.
- Slide Switch: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Avên hewayê: For motor cooling and dust expulsion.
4. Sazkirin
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Sazkirina Parêzvanê Parastinê
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Bişkojka qefilandina spindle bikirtînin û bigirin.
- Place the inner clampflange li ser spindle.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- Screw li ser clamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Bişkojka qefila spindle berdin.
5. Telîmatên Operating
Powering On / Off
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Kontrola Leza Guharbar
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Always hold the grinder firmly with both hands.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Paqijî
- Beriya paqijkirinê her tim amûrê ji fîşê vekin.
- Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
- Derveyê amûrê bi reklamê paqij bikinamp çît. Kîmyewî û paqijkerên hişk bikar neynin.
Brushesên karbonê
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Embarkirinî
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Destpêkirin
| Pirsegirêk | Sedema gengaz | Çare |
|---|---|---|
| Amûr dest pê nake | Ne dabînkirina hêzê Restart interlock activated (after power failure) Têra elektrîkê zirar dîtiye | Têkiliya hêzê kontrol bikin Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Amûr di dema xebitandinê de disekine | Parastina Overload aktîfkirin Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| Lerizîna zêde | Worn or damaged disc Dîska ku bi xeletî hatî danîn Destê xwe berdane | Dîskê biguherînin Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Firçeyên karbonê yên westiyayî Dust buildup in vents | Have brushes inspected/replaced by service center Qulikên hewayê bi tevahî paqij bikin |
8. Specifications
| Taybetî | Giranî |
|---|---|
| Hejmara Model | 447668 |
| Input Power | 1700 W |
| Power Output | 1050 W |
| Voltage | 230 V |
| Pircarînî | 50/60 Hz |
| Max. Diskê Diameter | 125 mm |
| No-load Leza | 2800-11500 rpm |
| Tool Holder (Angle Grinder) | M14 |
| Cable Length | 4 m |
| Pîvan (L x W x H) | 340 x 77 x 105 mm |
| Pîvan | 2.6 kg |
| Reng | Red, Black, Silver |
| Mal | Hesinî |
9. Garantî û Piştgirî
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex webmalper an li ser pakkirina hilberê we.