uxcell SFM-27 DC 3-24V 100dB Active Electronic Buzzer Instruction Manual

1. Destpêk

This manual provides instructions for the proper installation, operation, and maintenance of the uxcell SFM-27 Active Electronic Buzzer. This device is designed to produce a continuous sound alarm when a DC voltage between 3V and 24V is applied. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

2. Hilbera Serîview

The uxcell SFM-27 is an active electronic buzzer featuring a plastic housing and two pre-attached wires for easy connection. It is designed for various industrial and electronic applications where an audible alert is required.

Taybetmendiyên sereke:

Wide Voltage Range: Operates on DC 3V to 24V.
High Sound Output: Produces a continuous sound at 100dB.
Têlkirina hêsan: Equipped with black and red wires for straightforward connection.
Avakirina Dorable: Housed in a plastic casing.
Sêwirana Compact: Suitable for integration into various systems.

Pêkhat:

Electronic Buzzer Unit (SFM-27)
Red Wire (Positive Terminal)
Black Wire (Negative Terminal)
Mounting Holes (for secure installation)

uxcell SFM-27 Active Electronic Buzzer, front view with red and black wires

Wêne 2.1: Pêşî view of the uxcell SFM-27 Active Electronic Buzzer, showing the sound output grille and attached red and black power wires.

3. Specifications

Parametre	Giranî
Navê hilberê	Electronic Buzzer
Model No.	SFM-27
Sound-making Type	Dengê Berdewam
Rated Voltage	DC 3-24V
Rated Current	15mA
Sound Pressure	100dB
Germahiya xebitandinê	-20°C heta +45°C
Mezinahiya Giştî (DFB)	47 x 30 x 14 mm / 1.85 x 1.14 x 0.55 înç
Mounting Holes (L*W)	3.5 x 4 mm / 0.14 x 0.16 inç
Mounting Hole Distance	39mm / 1.5 inch
Wire Length	11cm / 4.3 inch
Frequency Resonant	2.5 ± 0.5 KHz
External Material	Pîlastîk
Reng	Spî
Giranî (per yekîneyek)	34 g

uxcell SFM-27 Active Electronic Buzzer with dimensions labeled

Figure 3.1: Dimensions of the uxcell SFM-27 Active Electronic Buzzer, indicating mounting hole spacing and overall size.

4. Agahiyên Ewlekariyê

Ji bo rêgirtina li zirar an zirara li hilberê, ji kerema xwe tedbîrên ewlehiyê yên jêrîn bişopînin:

Voltage Lihevhatî: Pêbaweriya dabînkirina hêzê piştrast bikintage is within the specified DC 3V-24V range. Applying incorrect voltage can damage the buzzer.
Polarîtî: Connect the red wire to the positive (+) terminal and the black wire to the negative (-) terminal of the DC power source. Incorrect polarity will prevent the buzzer from functioning.
Têlkirin: All wiring should be performed by a qualified individual or with proper knowledge of electrical connections. Ensure connections are secure to prevent short circuits.
Dor: Do not expose the buzzer to extreme temperatures, moisture, or corrosive environments beyond its operating specifications.
Asta Deng: The buzzer produces a loud sound (100dB). Avoid prolonged exposure to the sound at close range to prevent hearing discomfort.
Zarok: Amûrê ji destê zarokan dûr bigirin.

5. Sazkirin û Sazkirin

Follow these steps to set up and install your electronic buzzer:

Cihê montajê amade bikin: Choose a suitable location for the buzzer. The buzzer features two mounting holes with a distance of 39mm (1.5 inches) between them.
Secure the Buzzer: Use appropriate screws (not included) to securely fasten the buzzer to your chosen surface through the mounting holes.
Hêza girêdanê:
- Identify the red wire and the black wire extending from the buzzer.
- Girêdan bike têl sor bo termînala erênî (+) of your DC power supply (3V-24V).
- Girêdan bike têla reş bo termînalê neyînî (-). of your DC power supply.
- Ensure all connections are firm and insulated to prevent short circuits.
Fonksiyona testê: Once wired, apply power to the circuit. The buzzer should emit a continuous sound. If it does not, refer to the Troubleshooting section.

6. Operasyon

The uxcell SFM-27 Active Electronic Buzzer is designed for simple operation. It functions as a direct alarm device:

When a DC voltage within the 3V-24V range is applied to its terminals with correct polarity, the buzzer will immediately emit a continuous sound at approximately 100dB.
The sound will cease when the power supply is disconnected or interrupted.
This buzzer produces a continuous tone and does not have adjustable volume or tone patterns.

7. Maintenance

The uxcell SFM-27 Active Electronic Buzzer requires minimal maintenance:

Paqijî: Periodically wipe the exterior of the buzzer with a soft, dry cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
Berçavderbasî: Regularly check the wiring for any signs of damage, fraying, or loose connections. Ensure the mounting remains secure.
Dor: Ensure the operating environment remains within the specified temperature and humidity ranges to prolong the life of the device.

8. Destpêkirin

If the buzzer does not function as expected, refer to the following troubleshooting guide:

Pirsegirêk	Sedema gengaz	Çare
No sound from buzzer	Ne dabînkirina hêzê Çewt voltage (outside 3V-24V) Polarîtîya têlkirinê ya çewt Têkiliyên winda an xeletî Damaged buzzer unit	Verify power supply is active. Hêza dabînkirina hêzê kontrol bikintage di navbera 3V-24V de ye. Ensure red wire is connected to (+) and black to (-). Inspect all wire connections for security. If all above are correct, the buzzer may be faulty and require replacement.
Weak or intermittent sound	Voltage too low (below 3V) Têkiliya winda Partial damage to buzzer	Piştrast bike voltage is within the optimal range (e.g., closer to 12V-24V for full loudness). Hemî girêdanên têlan kontrol bikin û ewle bikin. Consider replacing the buzzer if the issue persists.

9. Garantî û Piştgirî

For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official uxcell brand store for additional product information and support resources.

uxcell Brand Store: https://www.amazon.com/stores/uxcell/page/9C5CFA37-6CB6-400F-AA4A-658A763458C5