1. Hilbera Serîview
The Alcad AI 270 is an indoor amplifier designed to boost television and radio signals within your home. It features advanced LTE 700 rejection to minimize interference from mobile phone signals, ensuring a clear and stable reception. This amplifier is suitable for enhancing signal strength for multiple televisions or receivers.
Taybetmendiyên sereke:
- LTE 700 Rejection: Filters out 4G/5G interference.
- High Gain: UHF: 24 dB, VHF/S: 14 dB for improved signal strength.
- Multiple Outputs: 1 input and 2 outputs for connecting multiple devices.
- Compact Design: White finish, suitable for indoor installation.
jimar 1: Pêşde view of the Alcad AI 270 Indoor Amplifier, showing its compact white casing and connection ports.
2. Telîmatên Ewlekariyê
Please read and follow these safety instructions carefully before installing and operating the Alcad AI 270 amplifier to prevent damage and ensure safe use.
- Tenê karanîna hundurîn: This device is designed for indoor use. Do not expose it to rain, moisture, or extreme temperatures.
- Navê min: Use only the provided power adapter. Ensure the power outlet matches the voltage daxwazên.
- Perwanekirin: Deriyên hewakirinê negirin. Ji bo rêgirtina li germbûna zêde, li dora cîhazê herikîna hewayê ya têr peyda bikin.
- Cihkirin: Saz bikin amplifier in a dry, well-ventilated area, away from heat sources and direct sunlight.
- Paqijî: Disconnect from power before cleaning. Use a soft, dry cloth. Do not use liquid cleaners.
- Xizmetkirin: Hewl nedin ku cîhazê bi xwe vekin an tamîr bikin. Hemû xizmetên xizmetguzariyê ji karmendên pispor re bişînin.
3. Naveroka pakêtê
Piştrast bike ku hemî tişt di pakêtê de hene:
- Alcad AI 270 Indoor Amplifier
- Power Adapter
- Manual Bikarhêner (ev belge)
4. Sazkirin û Sazkirin
Follow these steps to properly install your Alcad AI 270 ampzindîtir:
- Cihek hilbijêrin: Select a central location indoors, close to your antenna input and your television(s). Ensure it is protected from moisture and extreme temperatures.
- Connect Antenna Input: Connect the coaxial cable from your antenna (or wall outlet) to the BEYAN port on the Alcad AI 270 amplîfîker. Piştrast bike ku girêdan ewle ye.
- Derketinên Girêdanê: Connect coaxial cables from the DERVE 1 û DERVE 2 portên li ser amplifier to your television(s) or other receiving devices.
- Hêza girêdanê: Plug the provided power adapter into the amplifier's power input port, then plug the adapter into a standard electrical wall outlet. The power indicator light on the amplifier should illuminate.
- Ji bo kanalan bigerin: Turn on your television(s) and perform a channel scan (refer to your TV's manual for instructions). This will allow your TV to detect the newly ampsînyalên lified.
5. Telîmatên Operating
The Alcad AI 270 amplifier operates automatically once powered on. There are no user-adjustable controls.
- Hêzdarkirin: Piştrast bike amplifier is connected to a power source. The power indicator light confirms it is operational.
- Zêdekirina sînyalê: Ew amplifier continuously boosts the incoming antenna signal and distributes it to the connected outputs.
- Performansa Optimal: For best results, ensure all coaxial cable connections are tight and in good condition.
6. Maintenance
The Alcad AI 270 amplifier requires minimal maintenance.
- Paqijî: Periodically wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Perwanekirin: Ensure that the ventilation slots are not obstructed by dust or other objects.
- Têkiliyên Kabloyê: Occasionally check all coaxial cable connections to ensure they remain tight and secure.
7. Destpêkirin
If you experience issues with your Alcad AI 270 amplifier, refer to the following troubleshooting guide:
| Pirsegirêk | Sedema gengaz | Çare |
|---|---|---|
| Ronahiya nîşana hêzê tune | Adaptora hêzê ne girêdayî ye an jî xera ye; priza elektrîkê kar nake. | Check power adapter connection to amplifier and wall outlet. Test the outlet with another device. |
| No signal or poor signal on TV | Loose cable connections; antenna issue; TV not scanned for channels; ampxerabûna lifier. | Ensure all coaxial cables are securely connected. Check your antenna for proper positioning and function. Perform a channel scan on your TV. If issues persist, contact support. |
| Picture pixelation or freezing | Signal too strong (over-amplification); interference; poor quality cables. | While rare with this model, try bypassing the amplifier to see if the signal improves. Check for sources of interference (e.g., other electronic devices). Replace old or damaged coaxial cables. |
8. Specifications
| Taybetî | Specification |
|---|---|
| Cins | AI-270 |
| Nîşan | Alcad |
| Awa | Indoor Amplifier |
| Reng | Spî |
| LTE Rejection | 700 MHz |
| Qezenc (UHF) | 24 dB |
| Gain (VHF/S) | 14 dB |
| Hejmara Input | 1 |
| Hejmara Hilberan | 2 |
| Hejmara kanalan | 2 |
| Babetê Weight | 1 kilogram (approx.) |
| Çêker | ALCAD |
9. Garantî û Piştgirî
Alcad products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or contact your local Alcad distributor. Keep your proof of purchase for warranty claims.
For technical support or further assistance, please visit the official Alcad webmalperê an bi beşa karûbarê xerîdar a wan re têkilî daynin.