Legrand 1597TRW Tamper Resistant GFCI Wall Outlet User Manual

Pêşkêş

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This device is part of the radiant collection, designed to offer reliable electrical protection in residential and commercial environments. Please read these instructions thoroughly before beginning installation or use.

Agahiyên Ewlekariyê

WARNING: Risk of electric shock. May cause serious injury or death. Turn off power at the circuit breaker or fuse box before installation.

Always disconnect power at the service panel before working with electrical wiring.
Installation must be performed by a qualified electrician or in accordance with all local and national electrical codes.
Do not install in wet locations unless specifically rated for such use.
Piştrast bike ku hemî girêdanên têlan ewle ne û bi rêkûpêk îzolekirî ne.
Test the GFCI outlet monthly to ensure proper operation.

Naveroka pakêtê

Berî destpêkirina sazkirinê, piştrast bikin ku hemî pêkhate li wir in:

Legrand 1597TRW Tamper Resistant GFCI Wall Outlet (White)
Mounting Screws
Destûra Rêvekirinê (ev belge)

Note: A screwless wall plate is not included and must be purchased separately.

Lêkirinî

Follow these steps for proper installation of your GFCI outlet:

Hêzê Vekin: Locate the circuit breaker or fuse that supplies power to the outlet box. Turn it off completely. Verify power is off using a voltage tester.
Derketina Kevin rakin: Carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wires were connected to the "LINE" and "LOAD" terminals.
Têlan Nas Bikin:
- LINE Wires: These wires bring power from the circuit breaker to the GFCI outlet.
- LOAD Wires: These wires carry power from the GFCI outlet to other downstream receptacles or devices that you want to protect. If there are no downstream receptacles, cap the LOAD wires individually.
- Têlê Erdê: Typically bare copper or green insulated.
Connect Wires to GFCI:
- Girêdan bike XET wires to the terminals marked "LINE" on the GFCI outlet.
- Girêdan bike DAWETKIRIN wires to the terminals marked "LOAD" on the GFCI outlet.
- Girêdan bike wire erdê to the green ground screw.
Giring: The Legrand 1597TRW features a feed-thru wiring configuration that allows the GFCI to protect downstream receptacles. It also prevents line-load reversal miswire, meaning there will be no power to the face or downstream receptacles if wired incorrectly. An auto-ground clip assures a positive ground to a metal box.
Mount the Outlet: Carefully fold the wires into the electrical box and secure the GFCI outlet to the box using the provided mounting screws.
Plateya Dîwarê saz bikin: Attach the screwless wall plate (not included) over the GFCI outlet.
Vejandina Hêzê: Elektrîkê dîsa li qulikê vekin.

Wêne: Pêşî view of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This image shows the two tamper-resistant receptacles, the TEST button (black), and the RESET button (red).

Emelî

The GFCI outlet is designed to protect against electrical shock by quickly shutting off power if a ground fault is detected.

Bişkojka RESET: After installation or a power outage, press the red RESET button to restore power to the outlet.
Bişkojka TEST: Press the black TEST button to simulate a ground fault. The GFCI should trip, and power to the outlet will be cut off. This confirms the GFCI is functioning correctly.

Testkirina mehane:

It is recommended to test your GFCI outlet monthly to ensure it is providing continuous protection. To test:

Plug alamp or other device into the GFCI outlet and turn it on.
Press the black TEST button. The lamp should turn off, and the red RESET button should pop out.
Press the red RESET button. The lamp should turn back on.
Ger lamp does not turn off or on as described, the GFCI may be faulty and should be replaced.

Lênerrînî

The Legrand 1597TRW GFCI outlet requires minimal maintenance. Regular testing is the primary maintenance procedure.

Keep the outlet clean and free from dust and debris.
Do not paint over the GFCI outlet or its buttons, as this can impair operation.
If the GFCI trips frequently without an apparent cause, consult a qualified electrician to inspect your wiring.

Çareserkirina pirsgirêkan

Pirsegirêk	Sedema gengaz	Çare
GFCI dê ji nû ve neyê sazkirin.	No power to the GFCI. Xeletiya erdê hat dîtin. Line-load reversal miswire. Faulty GFCI.	Bişkojka tîrêjê kontrol bikin. Unplug all devices from the GFCI and downstream outlets. Try to reset. If it resets, plug devices back in one by one to identify the faulty device. Verify wiring connections (LINE to LINE, LOAD to LOAD). Replace the GFCI.
GFCI gelek caran rêwîtiyê dike.	Faulty appliance/device. Moisture in the circuit. Têlên zirar dîtî.	Identify and remove the faulty appliance. Ensure the environment is dry. Consult a qualified electrician to inspect wiring.
Elektrîk naçe prizê.	GFCI têk çû. Circuit şikand. Têlên çewt.	Bişkojka RESET bike. Kontrol bike û veavakirina circuit breaker. Girêdanên têlan piştrast bikin.

Specifications

Cins: 1597TRW
Nîşan: Legrand
Reng: Spî
Amperage: 15 Amps
Voltage: 125 Volt
Tevahiya dergehên hêzê: 2
Tîpa girêdanê: Nema 5-15
Mal: Hesinî
Taybetmendî: Tamper Resistant, Auto-Ground Clip, Feed-Thru Wiring, Line-Load Reversal Miswire Prevention
UPC: 680147085438
ASIN: B079LTP7Y5

Garantî û Piştgirî

Legrand products are designed and manufactured to the highest quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Legrand website. For technical support or further assistance, please contact Legrand customer service.

Contact information for Legrand can typically be found on their official webmalper an pakkirina hilberê.

Legrand 1597TRW