Superior Electronics Simply SUPTLB001 Universal Remote Control

1. Destpêk

The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.

2. Taybetmendiyên Hilberê

• Berhevoka gerdûnî: Controls a wide range of devices.
• Self-Learning Function: Easily acquires commands from existing remote controls.
• Two-Device Control: Manages up to two separate electronic devices.
• Bişkokên Mezin: Designed with oversized, clearly marked buttons for enhanced usability.
• Sêwirana Intuitive: Simple layout for straightforward operation.
• Quick Programming: Learning process typically takes less than one minute per button.

3. Sazkirin

3.1. Sazkirina Pîl

The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.

1. Li ser pişta kontrolê ya ji dûr ve qapa beşa pîlê bibînin.
2. Qapaxê ber bi jêr ve bişkînin an jî kilîtê bikirtînin û rakin da ku vekin.
3. Du pîlên AAA têxinê, piştrast bikin ku termînalên erênî (+) û neyînî (-) bi nîşanên di hundurê beşê de bi rêkûpêk li hev tên.
4. Qapaxa beşa bateriyê vegerînin cihê xwe, heta ku bi ewlehî bitikîne, wê dîsa bixin cihê xwe.

Image: Back of the remote control, indicating the battery compartment.

3.2. Learning Function Programming

The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.

1. Prepare Remotes: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
2. Têkeve Moda Fêrbûnê: Bişkojk û bigire ERK button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
3. Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
4. Select Button to Learn: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
5. Sînyala Veguhestinê: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
6. Repeat for Other Buttons: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
7. Exit Learning Mode: Gava ku hemî bişkokên xwestî hatin bernamekirin, bikirtînin ERK button on the Simply remote again to exit learning mode. The indicator light will turn off.

Not: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.

Wêne: Pêşî view of the Simply SUPTLB001 remote control.

4. Telîmatên Operating

After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.

• Hilbijartina Amûrê: Bitikîne A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
• Power On / Off: Bitikîne ERK button to turn the selected device on or off.
• Kontrolkirina Volume: Bi kar tînin V+ bişkojk ji bo zêdekirina deng û V- kêmkirina qebareyê.
• Program/Channel Control: Bi kar tînin P+ button to go to the next program/channel and P- to go to the previous program/channel.
• Ketina AV: Bitikîne AV button to switch between video input sources on your television.

The functionality of each button depends on how it was programmed during the learning process.

5. Maintenance

• Paqijî: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
• Guhertina Pîl: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
• Embarkirinî: Kêm-kontrolê li cîhekî hişk, dûr ji tîrêjên rojê yên rasterast û germahiyên zêde hilînin.

6. Destpêkirin

7. Specifications

Wêne: Alî view of the remote control with approximate dimensions.

8. Garantî û Piştgirî

This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2 sal ji roja kirînê.

For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics webmalper. Ji kerema xwe delîla kirîna xwe ji bo piştrastkirina garantiyê biparêzin.