Manual Bikarhêner

1. Destpêk

Spas ji bo kirînêasing the Project Source 2-Pack 13-inch Bronze Flush Mount Light fixtures. These fixtures are designed to provide ambient lighting with a traditional aesthetic, featuring a durable bronze finish and an elegant alabaster glass shade. They are suitable for various indoor spaces, including bathrooms, bedrooms, kitchens, dining rooms, and living rooms, enhancing the decor while providing reliable illumination.

jimar 1: Two Project Source 13-inch Bronze Flush Mount Light fixtures. Each fixture features a round bronze base and a dome-shaped alabaster glass shade, secured by a small finial at the bottom center of the shade.

2. Agahdariya Ewlekariya Girîng

HIŞYARÎ: Rîska Şoka Elektrîkê. Berî sazkirin an tamîrkirinê, elektrîkê ji qutiya sîgorteyan an jî şkênera devreyê qut bikin.

• Berî destpêkirina sazkirinê hemî rêwerzan bi baldarî bixwînin.
• Divê hemû girêdanên elektrîkê li gorî rêzikname, rêzikname, an jî Koda Elektrîkê ya Neteweyî (NEC) bin. Ger hûn bi girêdanên kabloyên elektrîkê yên rast nizanin, bi elektrîkçîyekî pispor re şêwir bikin.
• Use only UL-listed wire connectors for the electrical connections.
• Ji watê ya herî zêde derbas nekintage specified for this fixture (14 Watts per bulb).
• Wear safety glasses and appropriate protective gear during installation.
• Piştrast bikin ku pêvek bi rêkûpêk zevî ye.

3. Naveroka pakêtê

Berî destpêkirina sazkirinê, piştrast bikin ku hemî pêkhate li wir in:

• 2 x 13-inch Bronze Flush Mount Light Fixtures (with alabaster glass shades)
• Mounting Hardware (screws, wire nuts, mounting bracket)
• Note: Light bulbs are NOT included.

4. Specifications

5. Sazkirin û Sazkirin

Amûrên Pêdivî: Phillips head screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.

Gavên Pêş-Sazkirinê:

1. Hêzê qut bikin: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the power completely before proceeding.
2. Herêmê amade bikin: Clear the work area and ensure you have stable footing if using a ladder.
3. Ji berhevxistin: Carefully remove the fixture and all components from the packaging.

Gavên Sazkirinê:

1. Bişkojka Mountkirinê ve girêdin: Secure the mounting bracket (included) to the electrical junction box in the ceiling using the provided screws. Ensure it is firmly attached.
2. Têlên Elektrîkê girêdin:
   • Girêdan bike reş (hot) wire from the ceiling to the reş têla amûrê bi karanîna gwîzek têl ve girêdin.
   • Girêdan bike spî (neutral) wire from the ceiling to the spî têla amûrê bi karanîna gwîzek têl ve girêdin.
   • Girêdan bike erd wire (bare copper or green) from the ceiling to the erd wire of the fixture (or the ground screw on the mounting bracket) using a wire nut or by wrapping it securely around the screw.
   Ensure all connections are tight and secure. Wrap electrical tape around wire nuts for added insulation.
3. Secure Fixture to Mounting Bracket: Carefully push the wired fixture up towards the ceiling, aligning the holes in the fixture base with the screws on the mounting bracket. Secure the fixture in place with the decorative nuts or screws provided.
4. Lampên Ronahî saz bikin: Insert the recommended A15 shape, E-26 medium base light bulbs (not included) into the sockets. Do not exceed 14 Watts per bulb.
5. Perdeya Camê Bixebitîne: Carefully place the alabaster glass shade onto the fixture. Secure it in place using the finial or retaining ring provided, tightening it gently until snug. Do not overtighten.
6. Vejandina Hêzê: Dema ku sazkirin qediya û hemî girêdan ewle bûn, elektrîkê li ser şkênera devreyê vegerînin.

6. Telîmatên Operating

Once the Project Source Flush Mount Light fixtures are correctly installed and power is restored, they can be operated using the standard wall switch connected to the circuit. Simply toggle the wall switch to turn the lights on or off.

7. Lênêrîn û Maintenance

Regular cleaning will help maintain the appearance and performance of your light fixtures.

• Cleaning the Fixture: Dust the bronze finish regularly with a soft, dry cloth. For more thorough cleaning, wipe the bronze finish with a damp cloth and a mild, non-abrasive soap solution, then dry immediately with a clean, soft cloth to prevent water spots.
• Cleaning the Glass Shade: The alabaster glass shade can be removed for cleaning. Wash it with mild soap and water, then rinse thoroughly and dry completely before reattaching to the fixture.
• Guhertina Bulb: Always ensure the power is turned off at the circuit breaker and the bulbs have cooled down before attempting to replace them. Use only bulbs that meet the specified wattage û cureyê bingehîn.
• Do not use abrasive cleaners, solvents, or polishes on any part of the fixture, as they may damage the finish or glass.

8. Destpêkirin

Heke hûn bi lampa xwe re rastî pirsgirêkan werin, li pirsgirêk û çareseriyên hevpar ên jêrîn binêrin:

• Ronahî venagere:
  • Check that the power supply is on at the circuit breaker.
  • Ensure the light bulbs are correctly installed and are not burnt out. Try replacing with a known working bulb.
  • Verify that all wire connections (black to black, white to white, ground) are secure and properly connected.
• Ronahî dibiriqe:
  • Ensure the light bulbs are fully tightened in their sockets.
  • Check for any loose wire connections within the fixture or junction box.
  • Confirm that the bulbs used are compatible with the fixture and are not exceeding the maximum wattage.
• Glass shade is loose or wobbles:
  • Gently tighten the finial or retaining ring that secures the glass shade. Do not overtighten.

Eger piştî van çareseriyan pirsgirêk berdewam bike, ji kerema xwe bi elektrîkçîyekî pispor re şêwir bikin an jî bi piştgiriya xerîdaran re têkilî daynin.

9. Garantî û Piştgiriya Mişterî

For detailed warranty information regarding your Project Source 2-Pack 13-in W Bronze Flush Mount Light, please refer to the documentation included with your original purchase. Warranty terms typically cover defects in materials and workmanship for a specified period.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Project Source customer service directly through their official webmalper an jî agahdariya têkiliyê ya ku di pakêta berhema we de hatiye dayîn. Ji kerema xwe dema ku hûn bi piştgiriyê re têkilî daynin, hejmara modela xwe (40804) û hûrguliyên kirînê amade bikin.