Philips Lighting 5058131PN

Rêbernameya Bikarhêner a Ronahiya Spot a LED a Philips myLiving PONGEE (Model 5058131PN)

1. Destpêk

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Philips myLiving PONGEE white LED Spot Light, angled view

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Agahiyên Ewlekariyê

Ji bo rêgirtina li birîndarî an zirarê, her tim tedbîrên ewlehiyê yên jêrîn bişopînin:

  • Ewlehiya Elektrîkê: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
  • Tenê karanîna hundurîn: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
  • Tîpa ampûlê: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage li ser pêvekê hatî destnîşan kirin.
  • Handling: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
  • Paqijî: Clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Naveroka pakêtê

Berî destpêkirina sazkirinê, piştrast bikin ku hemî pêkhate li wir in:

  • Philips myLiving PONGEE LED Spot Light fixture (1 unit)
  • Amûrên montajê (vîd, pêvekên dîwêr)
  • manual Instruction

Not: A GU10 LED bulb is ne tê de û divê cuda bên kirîn.

Packaging box for Philips myLiving PONGEE LED Spot Light

Wêne 2: Pakêta Berhemê

4. Sazkirin û Sazkirin

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Dimensional drawing of Philips myLiving PONGEE LED Spot Light showing measurements in millimeters

Figure 3: Product Dimensions (all measurements in mm)

  1. Qada Sazkirinê amade bikin: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
  2. Hêzê qut bikin: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
  3. Bingehê bixin: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
  4. Têlkirina Fixture: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
  5. Bulb saz bikin: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
  6. Laşê Amûrê Girêde Bike: Secure the main body of the spot light to the mounted base.
  7. Vejandina Hêzê: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Telîmatên Operating

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

  • Vekirin/Pakkirin: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
  • Rêzkirina Rêvekirina Ronahî: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Maintenance

  • Paqijî: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
  • Guhertina Bulb:
    1. Veguheztina enerjiyê li qutiya çerxê.
    2. Allow the bulb to cool completely.
    3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
    4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
    5. Hêzê vegerînin.

7. Destpêkirin

PirsegirêkSedema gengazÇare
Ronahî naşewite.
  • Ne dabînkirina hêzê.
  • Ampûl xera ye an jî bi rêkûpêk nehatiye sazkirin.
  • Girêdana wiring Loose.
  • Çêker an sîgorteyê kontrol bikin.
  • Ensure the wall switch is ON.
  • Replace the bulb with a new GU10 LED bulb.
  • Consult a qualified electrician to check wiring connections.
Ronahî difûre.
  • Girêdana ampûlê sist e.
  • Guhêrbarê tîmerê yê nelihevhatî (eger hebe).
  • ampûl xelet.
  • Ensure the bulb is securely twisted into the socket.
  • If using a dimmer, ensure it is compatible with LED bulbs.
  • Lampê biguherînin.

8. Specifications

  • Nîşan: Philips Ronahî
  • Hejmara Model: 5058131PN
  • Pîvanên hilberê (L x W x H): 10 x 13.8 x 8.2 cm
  • Giraniya Babetê: 345 gram
  • Mal: Hesinî
  • Reng: Spî
  • Awayî: Rojane
  • Tîpa Çavkaniya Ronahî: LED
  • Bulb Socket Type: GU10
  • Hejmara ampûlan: 1 (bulb not included)
  • Volta Inputtage: 220-240 Volt
  • Çavkaniya hêzê: Electrical cable (wired)
  • Cureyê Sazkirinê: Surface Mount (Ceiling/Wall)
  • Rêjeya IP: IP20 (Tenê karanîna hundurîn)
  • Taybetmendiyên Taybet: Energy-efficient, Swivel head
  • Bikaranîna taybetî: Home, Bedroom, Living Room

9. Garantî û Piştgirî

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting webcih. Her wiha hûn dikarin ji bo alîkariyê bi firoşkarê xwe re têkilî daynin.

Ji bo her îdiayên garantiyê delîla kirîna xwe biparêzin.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.