PeakTech P 2800A Professional Laser Distance Meter User Manual

1. Destpêk

The PeakTech P 2800A is a professional laser distance meter designed for precise and reliable measurements in various applications, including construction, architecture, and landscaping. This device offers a measurement range from 0.05 meters to 40 meters with high accuracy. It features a multi-line backlit LCD display and quick selection keys for advanced functions such as area, volume, and Pythagorean calculations, as well as addition and subtraction. The internal memory can store up to 99 measurement values for convenient recall. An integrated 90° flip-out stop ensures accurate alignment from edges or corners, enhancing measurement precision.

2. Telîmatên Ewlekariyê

Ji kerema xwe berî ku hûn cîhazê bikar bînin, hemû rêwerzên ewlehiyê bixwînin û fêm bikin. Neşopandina van rêwerzan dibe ku bibe sedema tîrêjên lazerê, şoka elektrîkê, agir, an birîndarbûna giran.

• Ewlehiya Laser: This device uses a Class 2 laser. Do not stare directly into the laser beam or direct it at other people or reflective surfaces. Laser radiation can cause eye injury.
• Ewlehiya Pîl: Use only specified alkaline AAA batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
• Jîngeha Xebatê: Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from water and high humidity.
• Lênerrînî: Do not attempt to modify or disassemble the device. Repairs should only be performed by qualified personnel.

3. Naveroka pakêtê

Piştrast bike ku hemî tişt di pakêtê de hene:

• PeakTech P 2800A Laser Distance Meter
• Belt Pouch
• 2 x 1.5V AAA Alkaline Batteries
• User Manual (German and English)
• Piştrastkirina Calibration

4. Device Serview

Familiarize yourself with the components and controls of your PeakTech P 2800A Laser Distance Meter.

jimar 1: PeakTech P 2800A Laser Distance Meter front view, showing the multi-line LCD display and control buttons. This image provides a general overview of the device's layout.

jimar 2: PeakTech P 2800A Laser Distance Meter mounted on a mini tripod, demonstrating its tripod thread for stable and precise measurements, especially over longer distances.

jimar 3: Close-up view of the integrated bubble level on the PeakTech P 2800A Laser Distance Meter, used to ensure the device is perfectly horizontal for accurate measurements.

jimar 4: PeakTech P 2800A Laser Distance Meter with its 90-degree flip-out stop extended, used for precise measurements from edges or corners, ensuring the measurement starts exactly from the reference point.

Key Buttons and Display Elements:

• MEAS (Red Button): Initiates measurement, confirms selections.
• OFF/CLEAR (Red Button): Powers off the device, clears current measurement/selection.
• YEKBÛN: Changes measurement units (m, in, ft).
• +: Addition function, navigates menus.
• -: Subtraction function, navigates menus.
• Area/Volume Button: Toggles between area and volume measurement modes.
• Pythagorean Button: Activates indirect measurement modes.
• Bişkoka Xala Referansê: Changes the measurement reference point (front, rear, flip-out stop).
• Bişkojka Bîrê: Accesses stored measurements.
• Bişkojka ronahiya paşerojê: Toggles display backlight.
• Display LCD: Multi-line display showing current measurements, previous results, and function icons.

5. Sazkirin

5.1 Sazkirina Pîl

1. Qapaxa beşa bateriyê li pişta cîhazê bibînin.
2. Ji bo vekirina beşê, qapaxê bişkînin an jî vekin.
3. Du pîlên alkalîn ên 1.5V AAA têxin, û piştrast bin ku polarîteya wan rast e (+/-).
4. Qapaxa beşa pîlê bi ewlehî bigire.

The device will automatically power on or can be powered on by pressing the MEAS pişkov.

6. Telîmatên Operating

6.1 Power On / Off

• Hêzdarkirin: Bitikîne MEAS pişkov.
• Hêzdarkirin: Bişkojk û bigire GIRTÎ / PAKÎ button for a few seconds, or the device will automatically power off after approximately 150 seconds of inactivity.

6.2 Guhertina Yekîneyên Pîvan

Bitikîne YEKBÛN button repeatedly to cycle through the available units: meters (m), inches (in), and feet (ft).

6.3 Setting the Reference Point

The device can measure from its front edge, rear edge, or the extended 90° flip-out stop. Press the Xala Referansê button to switch between these options. The current reference point is indicated on the display.

6.4 Pîvandina Dûriya Yekane

1. Lazerê ber bi hedefê ve araste bike.
2. Bitikîne MEAS carekê bişkojkê bikirtînin da ku lazerê çalak bikin.
3. Bitikîne MEAS button again to take the measurement. The result will be displayed.

6.5 Pîvandina Berdewam (Kêmtirîn/Maksîmûm)

1. Bişkojk û bigire MEAS button for approximately 2 seconds. The device will enter continuous measurement mode.
2. Move the device slowly to measure different points. The display will show the current, minimum, and maximum measured distances.
3. Rojnamevanî MEAS dîsa ji bo rawestandina pîvandina berdewam.

6.6 Pîvana Herêmê

1. Bitikîne Qad/Dild button once to enter area measurement mode. An icon for area will appear on the display.
2. Aliyê yekem (mînak, dirêjahî) bi tikandina MEAS.
3. Aliyê duyemîn (mînak, firehî) bi tikandina MEAS.
4. The calculated area will be displayed.

6.7 Measurement Volume

1. Bitikîne Qad/Dild button twice to enter volume measurement mode. An icon for volume will appear.
2. Dirêjahî bi tikandina bipîve MEAS.
3. Bi tikandina firehiyê bipîve MEAS.
4. Bilindahî bi tikandina bişkojkê bipîvin MEAS.
5. The calculated volume will be displayed.

6.8 Pîvana Pythagorean (Pîvana Nerasterast)

This function allows indirect measurement of heights or distances using the Pythagorean theorem. There are typically several modes (e.g., two-point, three-point). Refer to the on-screen icons for guidance.

1. Bitikîne Pythagorean button to select the desired indirect measurement mode.
2. Ji bo pîvandina pêwîst (mînak, hîpotenûz, bingeh) rêwerzên li ser ekranê bişopînin.
3. The device will calculate and display the unknown height or distance.

6.9 Komkirin û Jêbirin

After taking a measurement, you can add or subtract subsequent measurements:

1. Pîvanek bigirin.
2. Bitikîne + bişkojk ji bo zêdekirinê an - bişkojk ji bo derxistinê.
3. Take the next measurement. The result will be added to or subtracted from the previous value.
4. Li gorî hewcedariyê dubare bikin.

6.10 Fonksiyona Bîrê

The device can store up to 99 measurement values.

• Dikan: Measurements are automatically stored.
• Bişûndebangkirin: Bitikîne Bîr button to view stored values. Use the + û - buttons to scroll through the memory.
• Bîra Paqij: Refer to the detailed user manual for specific instructions on clearing memory, as this may vary.

7. Maintenance

• Paqijî: Nermek bikar bînin, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Clean the laser lens carefully with a soft cloth, similar to cleaning camera lenses.
• Embarkirinî: Store the device in its belt pouch in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• Guhertina Pîl: Dema ku nîşana pîlê kêm li ser ekranê xuya bibe, pîlan biguherînin.

8. Destpêkirin

9. Specifications

10. Garantî û Piştgirî

PeakTech products are manufactured with high quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your local PeakTech distributor. For technical support or service inquiries, please visit the official PeakTech webmalperê an bi beşa karûbarê xerîdar a wan re têkilî daynin.