1. Destpêk
Thank you for choosing the Einhell TC-LD 25 Laser Distance Meter. This device is designed for quick and accurate measurement of distances up to 25 meters. Its compact design and user-friendly interface make it an ideal tool for various applications in construction, renovation, and DIY projects. Please read this manual carefully before using the device to ensure safe and optimal operation.
Figure 1: Einhell TC-LD 25 Laser Distance Meter
2. Agahiyên Ewlekariyê
This device uses a Class II laser. Observe the following safety precautions:
- Rasterast li tîra lazerê nenêrin.
- Tîra lazerê ber bi mirov û heywanan ve neynin.
- Dûr girtina çavê rasterast ji tîra lazerê.
- Do not disassemble or modify the device. Repairs should only be performed by authorized personnel.
- Amûrê ji destê zarokan dûr bigirin.
The laser diode operates at 635 nm.
3. Hilbera Serîview
Familiarize yourself with the components of your Einhell TC-LD 25.
Wêne 2: Pêşî View (Display, Buttons)
Wêne 3: Paş View (Beşa Pîlê)
Wêne 4: Alî View
Pêkhat:
- Vebûna Lazerê: Tîrêjên lazerê ji bo pîvandinê dişîne.
- Ekrana Nîşandanê: Shows measurement results, mode, and battery status.
- Measurement Button (ON/MEAS): Amûrê vedike û pîvandinê dest pê dike.
- Function/Unit Button (FUNC/UNIT): Cycles through measurement modes and changes units.
- Bişkoka Xala Referansê: Switches between front and rear reference points.
- Clear/Off Button (C/OFF): Pîvana dawî paqij dike an jî cîhazê digire.
- Parçeya pîlê: Located at the back for AAA batteries.
4. Sazkirin
4.1 Sazkirina Pîl
The Einhell TC-LD 25 requires two (2) AAA alkaline batteries (not included).
- Open the battery compartment cover located on the back of the device (refer to Figure 3).
- Du bataryayên AAA têxinê, û piştrast bin ku polarîteya wan rast e (+/-).
- Qapaxa beşa pîlê bi ewlehî bigire.
Wêne 5: Parçeya Pîl
5. Telîmatên Operating
5.1 Vemirandin/Off
- Ji bo Vekirin: Bitikîne LI / MEAS bişkok. Lazer dê were çalakkirin.
- Ji bo Vemirandinê: Bişkojk û bigire C/OFF button for a few seconds. The device also features an automatic shutdown function after 3 minutes of inactivity to conserve battery life.
5.2 Pîvandina Dûriyê ya Bingehîn
- Amûrê vekin.
- Point the laser beam at the target.
- Bitikîne LI / MEAS button once. The measured distance will be displayed on the screen.
5.3 Pîvandina Berdewam (Kêmtirîn/Maksîmûm)
This mode allows you to track the minimum and maximum distances as you move the device.
- Bitikîne FUNC/UNIT button until the continuous measurement icon (often a running person or min/max symbols) appears on the display.
- Move the device slowly towards or away from the target. The display will continuously update the current, minimum, and maximum distances.
- Rojnamevanî LI / MEAS to stop continuous measurement and view the final minimum and maximum values.
Figure 6: Continuous Measurement Example
5.4 Guhertina Xala Referansê
The device can measure from its front edge or its rear edge. The default is usually the rear edge.
- Bitikîne Xala Referansê button to toggle between front and rear measurement. An icon on the display will indicate the active reference point.
Figure 7: Measuring from Rear Edge
Figure 8: Measuring from Front Edge
5.5 Guhertina yekîneyên
The device primarily uses metric units (meters).
- Bitikîne FUNC/UNIT button repeatedly to cycle through available units (e.g., m, ft, in).
6. Maintenance
- Paqijkirina amûrê bi nermî, damp çît. Paqijkerên abrasive an solvanan bikar neynin.
- Regularly check the battery compartment for corrosion. Remove batteries if the device will not be used for an extended period.
- Store the device in its included pouch in a dry, dust-free environment.
Figure 9: Included Carrying Pouch
7. Destpêkirin
| Pirsegirêk | Sedema gengaz | Çare |
|---|---|---|
| Amûr naçe | Low or dead batteries; incorrect battery polarity | Pîlan biguherînin; polarîteyê kontrol bikin |
| Pîvandinên nerast | Unstable surface; obstruction in laser path; extreme temperatures | Ensure stable measurement; clear path; operate within specified temperature range |
| Laser nayê dîtin | Bright ambient light; long distance measurement | Use in lower light conditions; use a target plate for long distances |
8. Specifications
| Taybetî | Specification |
|---|---|
| Hejmara Model | TC-LD 25 (2270075) |
| Rêzeya pîvandinê | 0.05 m - 25 m |
| Rastiya Pîvan | +/- 3 mm / m |
| Dersa Laser | Dersa II |
| Laser Diode | 635 nm |
| Neçalakkirina Otomatîk | minutes 3 |
| Batteries | 2 x AAA (Alkalîn) |
| Pîvan (L x W x H) | 11.2 x 2.5 x 4 cm |
| Pîvan | 70 g |
| Mal | Acrylonitrile Butadiene Styrene |
| Rêjeya Parastina Navneteweyî | IP54 (Water resistant) |
9. Garantî û Piştgirî
Einhell products are manufactured with high-quality materials and undergo strict quality control. For any warranty claims or technical support, please refer to your purchase documentation or contact Einhell customer service.
Spare parts availability in the EU is guaranteed for 1 year.
For further information, visit the official Einhell store: Einhell Store