DYNAUDIO Emit M10 Bookshelf Speaker Instruction Manual

Pêşkêş

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

Agahiyên Ewlekariya Girîng

• Berî ku hûn hilberê bikar bînin, van rêwerzan bi baldarî bixwînin.
• Van talîmatan ji bo referansa pêşerojê biparêzin.
• Hemî hişyariyên li ser hilberê û di rêwerzên xebitandinê de guhdarî bikin.
• Hemî talîmatan bişopînin.
• Vê amûrê li nêzî avê bikar neynin.
• Tenê bi qumaşê hişk paqij bikin.
• Tu vebûnên hewakirinê negirin. Li gorî rêwerzên çêker saz bikin.
• Li nêzî ti çavkaniyên germê yên wekî radyator, tomarên germê, sobe, an amûrên din saz nekin (di nav de ampgiyandar) ku germê çêdikin.
• Tenê pêvedan / pêlavên ku ji hêla çêker ve hatine destnîşan kirin bikar bînin.
• Hemî karûbarê ji personelên karûbarê pispor re bişînin. Xizmetkirin hewce ye dema ku alav bi her awayî zirarê dîtibe, wek mînak têra dabînkirina elektrîkê an fîşa xera bibe, şil hatibe rijandin an tişt ketine nav cîhazê, alav li ber baran an şilbûnê ketibe, bi asayî kar nake. , an hatiye avêtin.

Naveroka pakêtê

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• Destûra Rêvekirinê (ev belge)

Heger tiştek wenda be an jî zirar bibîne, ji kerema xwe tavilê bi firoşkarê xwe re têkilî daynin.

Damezirandin

Danîna Axaftvan

Proper speaker placement is crucial for optimal sound quality. Consider the following guidelines:

• Dûrahî ji dîwaran: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• Bilindî: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• Stereo Triangle: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• Toe-in: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstage focus.

Wêne: Pêşî view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

Wêne: Pêşî view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

Girêdana bi an Amplifier

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. Hêzdarkirin: Xwe piştrast bikin amplifier is turned off and unplugged from the power outlet before making any connections.
2. Kabloyên Axaftvan: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. Polarîtî: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. Têkiliyên Ewle: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

Wêne: Paş view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

Karanîna Axaftvanên We

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• Hêzdarkirin: Têkeve û ya xwe veke ampzindîtir.
• Kontrolkirina Volume: Bi ya dest pê bikin amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• Serdema Veqetandinê: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• Grills: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

Lênerrînî

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• Paqijî: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. For stubborn marks, lightly dampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• Grills: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• Ji tîrêja tavê ya rasterast û germê dûr bixin: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• Şilî: Keep the speakers away from excessive moisture or humidity.
• Parastina Şofêr: Avoid touching the speaker drivers (tweeter and woofer) directly, as this can cause damage.

Çareserkirina pirsgirêkan

Heke hûn bi pirsgirêkên axaftvanên xwe re rû bi rû bimînin, li pirsgirêk û çareseriyên hevpar ên jêrîn binêrin:

• Deng tune:
  • Piştrast bike amplifier is powered on and connected correctly.
  • Hemû girêdanên kabloyên axaftvanan li her duyan kontrol bikin amplifier and the speakers for secure contact and correct polarity.
  • Verify the correct input source is selected on your ampzindîtir.
  • Confirm the volume is turned up on the ampzindîtir.
• Dengê Xerab:
  • Asta deng li ser cîhaza xwe kêm bikin amplifier. Overdriving the speakers can cause distortion.
  • Check speaker cable connections for any loose strands or short circuits.
  • Piştrast bike amplifier's power output is suitable for the speakers (refer to specifications).
  • Çavkaniya deng ji bo xirabûnê kontrol bike.
• Basa Qels:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• Dengên Nehevsengtage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

Specifications

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

Garantî û Piştgirî

Agahî Garantî

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTYEv garantî kêmasiyên materyal û karîgeriyê di bin karanîna normal de vedihewîne. Ji kerema xwe delîla kirînê ji bo îdîayên garantiyê biparêzin.

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO website.

Piştgiriya Mişterî

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support webmalperê ji bo arîkariya bêtir.

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.